Description
The EIPL CD60 commercial/industrial dehumidifier is a stand alone solution to your humidity problem. It was designed to provide energy efficient humidity control in a wide range of applications including offices, laboratories, storage areas, restaurants, bars, museums, locker rooms, computer, telecommunication rooms and basements. It is a quiet, high efficiency, high capacity unit designed to suit your HVAC needs. The unit is supplied with a pre-wired, remote humidistat, extra long power cord and long condensate tube. This preassembly makes the installation process simplistic, thereby reducing the overall installation and project cost. The high efficiency Rotary compressor ensures the maximum extraction with the lowest running costs. Fully adjustable feet ensure the unit can be leveled quickly and accurately.
The compact physical size and high performance makes the CD60 the ideal choice for areas which require humidity control.
Application
- Offices
- Laboratories
- Basements
- Storage Areas
- Restaurants
- Bars
- Museums
- Locker Rooms
- Computer Rooms
How the CD60 Works
EIPL dehumidifiers are effective solutions to environmental control problems. The CS ranges of units are high capacity dehumidifiers, made to operate at high efficiencies by removing moisture from the air through the refrigeration process. The fan draws the moist air through the cold evaporator coil, which cools the air below its dew point. Moisture forms on the evaporator coil and is collected in the condensate tray. The cooled air then passes through the hot condenser coil where it is reheated using the same energy removed during the cooling phase, plus the additional heat generated by the compressor. The air is, therefore, discharged from the dehumidifier at a slightly higher temperature with a lower absolute humidity than that which entered. Continuous circulation of air through the dehumidifier gradually reduces the relative humidity within the area. Because the CS ranges of units are equipped with an internal humidistat, they automatically switch on and off to save energy and expense by maintaining the desired level of humidity with intermittent operation.
The additional features of the CD60 make the unit the ideal choice for installations where remote humidistat mounting is required. The high capacity condensate pump ensures the unit is capable of pumping water from basements or to higher drainage points.
Features
- Adjustable control humidistat to maintain the level of dryness.
- A convenient drain point for condensate collection and hose attachment.
- EIP’s unique “Hot Gas” defrosting feature which automatically melts away frost buildup providing effective operation at low ambient temperatures.
- Rugged, epoxy powder-coated steel chassis and housing.
- Hours run meter
- Simplicity of installation and operation with a standard 115V plug.
- Extra long power cord.
- High capacity fully automatic, condensate pump
- On/Off Control
- Electronic Defrost Control
- Compressor Type: Rotary
- Fitted Mains Plug
- Free Standing Adjustable Feet
- Remote Humidistat
- Adjustable Control Humidistat
- Quick Disconnect Hose Coupling
- 25’ Length of PVC Drain Hose
- Epoxy Powder Coating
Specifications
- Height: 17” (432mm)
- Width: 20” (514mm)
- Depth: 14” (356mm)
- Weight: 80 lbs (36kg)
- Voltage: 110V
- Phase: 1
- Frequency: 60 Hz
- Current: 7A
- Power: 880W
- Airflow: 360 CFM (608m3/hr)
- Noise Level: 57 dba
- Refrigerant: R22
- Effective Volume: 8,369 cu.ft (237m3)
- Typical Extraction: 56 ppd
- Min Operating Temp: 33°F (1°C)
- Max Operating Temp: 95°F (35°C)
