Dake Model SE 10 DM 220V Three Phase 10” Round Capacity Stationary Mitering Horizontal Bandsaw 983112-2

Description

Heavy duty, dual mitering saw that comes with on standard Bi-metal blade. Hydraulic controlled down feed with automatic shut off at the end of the cut. 2.75HP, 220V motor with up to 60° right mitering capabilities. Dual operating modes with head descent control lock switch. Pre-set the down feed and shut switch so down feed does not need resetting after each cut. 

No tool takes more abuse than a horizontal band saw and nobody offers more dependable, more trouble-free horizontal bandsaws than Dake. Their heavy-duty, double-frame construction has been an industry standard since 1941. Since then, Dake’s four models of horizontal bandsaws have provided problem-free performance and maintenance-free operation, year after year. 

Features

• Hydraulic controlled down feed with adjustable manual return
• Automatic shut off at the end of the cut
• Dual operating modes with head descent control lock switch. Pre-set the down feed and shut switch so down feed does not need resetting after each cut
• Powerful, flame tempered, manual clamping vise. Hand wheel adjusted the quick release lever for rapid vise opening and closing action. The vise clamps material firmly
• Traversing vise can be used left or right of the blade
• Ergonomic designed for operator’s comfort and control
• Gearbox is direct bolted to the bow for less vibration, and positive drive gear box is direct driven via steel and bronze gears, no belts and pulleys to contend with
• CE certified electronics. Low voltage switches. Thermo over load protection, low voltage protection with low voltage trigger motor start switch and blade cover interlock
• Blade tensioning is done via a handwheel and color coded gauge tensioning system taking the guesswork out of tensioning
• Miters up to 60° right / 45° left. Mitering pre-sets with flip up and pin stops makes set up fast and has precise with miter scale for all angles in between. The head turns – the material does not
• Horizontally mounted guide arms for more rigidity and straightest cuts. Guides are rollers with carbide inserts that are fully adjustable and replaceable
• Electric coolant pump and self-contained coolant system
• Steel fabricated base and stock stop gauge 

Standard Equipment

• Steel base
• 1 standard bi-metal blade
• Traversing, manual vise
• Coolant
• Stock stop gauge 

Specifications

• Capacity
  • Solid Round 90°: 10”
  • Solid Round 45° Right: 8”
  • Solid Round 60° Right: 5”
  • Solid Square 90°: 7½”
  • Solid Square 45° Right: 7½” x 6¾”
  • Solid Square 60° Right: 5”
  • Solid Rectangle 90°: 10½” x 7¾”
  • Solid Rectangle 45° Right: 8¼” x 3-1/8”
  • Solid Rectangle 60° Right: 4¾” x 5¼”
• Blade Width: 1”
• Blade Length: 108”
• Blade Speed: 115-230 fpm
• Workable height: 37”
• Horsepower: 2¾ HP
• Electrical Requirements: 220V Three Phase
• Machine Dims: 66” x 28” x 74”
• Approx Weight: 800 lbs