Box and Pan Sheet Metal Brakes

• Length: 48"
• Thickness: 13 ga.
• Number of Fingers: 11
• Worktable Height: 28"

• Box Depth: Unlimited
• Maximum capacity of 16 gauge mild steel.
• Clamping Force: 6 ton
• Bend Angle: 0 – 180°

• Stop rod for repeatability
• Counterweight apron assist
• Adjustable beam for varying sheet thickness
• 2-piece hardened finger assortment: 5 - 2", 6 - 3", 5 - 4"

• 12 guage mild steel
• 16 guage stainless 
• 4" maximum depth of box 
• 49" bending length 

• Floor Stand INCLUDED
• Air/Hydraulic Assist - No Counterweight needed
• Bends up to 20 Gauge Mild Steel
• Bends up to 120 Degrees

• 48" x 16 Gauge Mild Steel Capacity
• Solid Heavy Duty Construction
• Reinforced Frame
• Hardened and Ground Fingers

• 16ga Mild Steel 
• 20ga Stainless Steel 
• 4" Maximum Depth of Box 
• 73" Bending Length 

• 12 gauge mild steel 
• 16 gauge stainless steel 
• 4" maximum depth of box 
• 73" bending length 

24" Length x 20 Gauge Mild Steel Capacity

5 Removable Fingers

Heavy Duty Construction

• Allows for the operator to clamp the material with their foot, to keep hands free
• Built from the best possible components
• Easy to adjust gap adjustment
• Spring loaded cylinder assists lifting the apron which gives assistance operator when bending at full capacity

• 16 gauge mild steel 
• 20 gauge stanless steel 
• 4" maximum depth of box 
• 97" bending length 

• Bending capacity in mild steel: 16 gauge
• Bending capacity in stainless steel: 20 gauge
• Max. hemming thickness in mild steel: 28 gauge
• Max. box depth: 4”

• Max Capacity: Aluminum 14 Ga, Mild Steel 18 Ga, Stainless 22 Ga
• Bending Length: 72” w/ 73” of Clearance
• 3-1/2" Depth of Box
• 125° Degree of Bend Max.

• Thickness (SS): 14 ga. (18 ga.)
• Stand: Yes
• Box Depth: 4"
• Bend Angle: 0 – 135°

• 16 guage mild steel 
• 20 gauge stainless steel 
• 6" maximum depth of box 
• 121" bending length 

• Bending Length: 48" w/ 49" of Clearance
• Max. 1-1/2" Lift of Beam Max.
• 125° Degree of Bend Max.
• Max Capacity: 16ga Mild Steel, 20ga Stainless, 12ga Aluminum

• Thickness (SS): 16 ga. (20 ga.)
• Box Depth: 2.5"
• Bend Angle: 0 – 135°
• Finger Sizes: 17 Total, 2 x 1-1/2”, 4 x 2”, 5 x 3”, 6 x 6”

• 1/8” Radius Finger Set Included
• Max. 1-1/2" Lift of Beam Max.
• 125° Degree of Bend Max.
• Max Capacity: 16ga Mild Steel, 20ga Stainless, 12ga Aluminum

• 1/16” Radius Finger Set
• Max Capacity: 16ga Mild Steel, 20ga Stainless, 12ga Aluminum
• 3-1/2" Depth of Box
• Max. 1-1/2" Lift of Beam Max

• Bending Length: 24" w/ 49" of Clearance
• 3-1/2" Depth of Box
• Max. 1-1/2" Lift of Beam Max.
• Max Capacity: 16ga Mild Steel, 20ga Stainless, 12ga Aluminum

• Brake Range: 0°-135°
• Maximum Width: 48''
• Maximum Size of Pan/Box Sides: 6"
• Minimum Reverse Bend: 1/2"

• 50" Box and Pan Brake
• 14 Gauge Mild Steel Capacity
• Adjustable Hold Down Fence
• Adjustable Bend Gap

• Mild Steel 12 Gauge
• Stainless Steel 16 Gauge
• 49" Bending Length
• Maximum Depth of Box: 6"

• 12 gauge mild steel 
• 16 guage stainless steel 
• 6" maximum depth of box 
• 73" bending length