Notchers

• Punch large holes and slots in anything from heavy sheet metal to steel beams
• Replaces the installed Punch Assembly on the Elite Ironworkers
• Requires 241 Punch & Die sets (contact Edwards for pricing and availability)
• 241 punch assembly accommodates punch and die sets in various shapes and sizes from 1" up to 4"

• Fits Edwards Elite 110 Ton Ironworkers
• Integrated alignment slots on the safety guarding easily allow for 45° shearing on Angle Iron to speed up your fabrication process
• Versatile Attachment that removes anything from a small nibble to a large notch out of Flat Bar or Angle Iron

• Easy to install and able to be conveniently stored on the 20 Ton Radius Roller frame
• Manufactured to work with the Edwards 20 Ton Radius Roller, this die assembly allows users to make smooth, long diameter curved bends in 2.0" pipe

• Provides additional support and the ram adapter plate to the shop press for the 24" and 32" press brake tooling
• Required for 60 Ton Shop Press

• Easily interchangeable attachment to maximize your Ironworker's capabilities
• Fits Edwards 25 Ton Ironworkers
• Fits Edwards 25 Ton Ironworkers (Prior to 8/1/17)
• Integrated alignment slots on the safety guarding easily allow for 45° shearing on Angle Iron to speed up your fabrication process
• Versatile Attachment that removes anything from a small nibble to a large notch out of Flat Bar or Angle Iron

• Fits Edwards 75 and 100 Ton Ironworkers (2013 and prior)
• Replaces Standard Punch Assembly or can be used as a secondary Punch Workstation
• Requires Oversize Punch & Die sets (contact Edwards for pricing and availability)
• The Oversize Punch Assembly accommodates punch & die sets in various shapes and sizes from 1" up to 1-9/16"

• Custom Dies for Schedule 80 and Tube are also available
• Designed for use with the Edwards Pipe Notcher Attachments, the Pipe Notcher Dies shear a perfect saddle cut in 2" Schedule 40 pipe
• Integrated alignment ensures your notches line up exactly, with a smooth precise shear every time
• Requires an Edwards Pipe Notcher Attachment

• Grinding Capacity: 1/2" to 4-1/2" O.D
• Angle Range: Straight=90° to 20°                              
• Motor: 6 hp, 460 Volt, Three Phase
• Manufactured in the Netherlands with a 3-year parts warranty

• Custom Dies for Schedule 80 and Tube are also available
• Designed for use with the Edwards Pipe Notcher Attachments, the Pipe Notcher Dies shear a perfect saddle cut in 1" Schedule 40 pipe
• Integrated alignment ensures your notches line up exactly, with a smooth precise shear every time
• Requires an Edwards Pipe Notcher Attachment

• Grinding Belt: 3″ x 89″
• Motor: 4.1 HP
• Tube Capacity: ¾″ - 2″
• Pipe Capacity: ¾″ - 1½″

• Grinding Capacity: 1/2" to 3" O.D
• Angle Range: Straight=90° to 30°              
• Motor: 4.5 hp, 460 Volt, Three Phase
• Manufactured in the Netherlands with a 3-year parts warranty

• 1" x 12" x 16" Table adds speed and precision to your punch workstation
• Adjustable fences and handles quickly and easily guide your material for perfect repeatable actions
• Replaces installed Die Table on 100 Ton Deluxe and 120 Ton Edwards Ironworkers

• Grinding Belt: 6″ x 89″
• Motor: 4.8 HP
• Tube Capacity: ¾″ - 3″
• Pipe Capacity: ¾″ - 2″

• Grinding Belt: 6″ x 89″
• Motor: 4.8 HP
• Tube Capacity: ¾″ - 3″
• Pipe Capacity: ¾″ - 2″

• Positive stop attachment fitted to the back of the Ironworker ensures accurate shearing
• Optimize your productivity on both the Flat Bar Shear and Angle Shear Workstations on your Edwards Ironworker
• Perfect for cutting long material to repeatable lengths quickly and easily
• Adjustable proximity sensor automatically cycles your Ironworker as you feed in material
• The electrical cord and adjustable electrical tieback install in minutes

• Fits Edwards 25 Ton Ironworkers
• Replaces Standard Punch Assembly or can be used as a secondary Punch Workstation
• Requires Oversize Punch & Die sets (contact Edwards for pricing and availability)
• The Oversize Punch Assembly accommodates punch & die sets in various shapes and sizes from 1" up to 1-9/16"

• Fits Edwards 100 Ton Deluxe and 120 Ton Ironworkers
• Replaces Standard Punch Assembly or can be used as a secondary Punch Workstation
• Requires Oversize Punch & Die sets (contact Edwards for pricing and availability)
• The Oversize Punch Assembly accommodates punch & die sets in various shapes and sizes from 1" up to 1-9/16"

• Positive stop attachment fitted to the back of the Ironworker ensures accurate shearing
• Fits Edwards 50, 55, 60, 65, 75, 100, 100 Ton Deluxe, 120 Ton, and Elite Ironworkers
• Speed up production on repeatable cuts by providing an adjustable stop for the Flat Bar Shear and Angle Shear

• Grinding Belt: 6″ x 89″
• Motor: 4.8 HP
• Tube Capacity: ¾″ - 3″
• Pipe Capacity: ¾″ - 2″

A standard feature on new Edwards Ironworkers from 25 Ton to 100 Ton, add our Pedestal Die Table to your existing Edwards Ironworker to punch flange or web surfaces of 2" x 2" steel angle, channel and beam sections. You can even punch larger angle sections leg-down. The Pedestal Die Table allows for the accessory Gauging Table Kit to be easily installed for a larger working and layout surface. Also available in Oversize for your larger Punch applications.

• Operates in multiple configurations to be compatible with multiple materials and machines
• Easy to use Adjustment Knob & Locking Nut make changing heights simple
• "T" position for Flat material support
• Height adjusts in "T" layout from 30.8" to 49.9"
• Width of rollers in "T" layout is 14"

• Accommodates punch and dies sets from 1/8" to 1-1/16" diameter
• Can be used as a secondary Punch Workstation on any Edwards Ironworker with an Open Workstation
• Design allows for punching larger angle iron leg down
• Fits all Edwards Ironworkers
• Fits all Edwards Ironworkers from 40-100 Tons

• Must have attachment for forming a u-shaped bracket or custom fasteners
• Requires Clevis Pins to work with the 20 Ton Horizontal Press
• Simple to mount to the 20 Ton Horizontal Press and easily adjustable to accommodate Clevis Pins from 7/8" to 3-1/2" in diameter