Tube & Pipe Notchers

  • Grinding Capacity: 1/2" to 4" O.D.
  • Angle Range: Straight=90° to 30°
  • Speed: 3420 RPM
  • Call For Special Pricing
  • Constructed of heavy-duty gauge steel
  • Convenient storage location in the stand for all mandrels/rollers
  • CSA/CUS Certified
  • Designed for quick belt changes
  • Forward and Reverse Switch
$5,817.89
$4,729.00
  • Vise Capacity 3/4" to 2" Tubing
  • Standard Vise
  • Swivel Vise with 1° Increments
  • 75 to 250rpm Adjustable Cutter Speed
  • Grinding Capacity: 1/2" to 3" O.D.
  • Belt: 4" x 78-3/4"
  • Motor (Optional): 4 hp 230v 1ph
  • Call For Special Pricing
  • Upgraded Vise Capacity 3/4” to 2-3/8” Tubing
  • Larger V-Block Vise
  • Swivel Vise with 1° Increments
  • 130rpm Single cutter Speed
  • Upgraded Vise Capacity 3/4” to 2-3/8” Tubing
  • Larger Adjustable Height V-Block Vise
  • Swivel Vise with 1° Increments
  • 130rpm Single cutter Speed
  • 1/4", 3/8", 1/2", 3/4", 1", 1-1/4", 1-1/2", 2" Notching Capacity (Pipe) 
  • 220V/Single Phase 
  • 243lbs 
  • 36"x16"x18" Dimensions 
$5,455.71
$4,499.00
  • 3PH Motor 
  • 4"x79" Belt Size 
  • 5420FPM Belt Speed
  • .75"-2" Notching Capacity (OD)
$7,002.86
$5,769.00
  • Upgraded Vise Capacity 3/4" to 2-1/2" Tubing
  • Upgraded Vise
  • Swivel Vise with 1° Increments
  • 75 to 250rpm Adjustable Cutter Speed
  • Upgraded Vise Capacity 3/4" to 2-3/8" Tubing
  • Larger Adjustable Height V-Block Vise
  • Swivel Vise with 1° Increments
  • 75 to 250rpm Adjustable Cutter Speed
  • Benchtop mounting fits on almost any bench in your shop
  • CSA/US Certified
  • Insert the end of the pipe, notch one side, rotate pipe 180°, reinsert to notch the other side
  • Magnetic Switch for Low Voltage Motor Protection
  • Replacement dies available in wide range of sizes
$5,042.57
$4,119.00
  • Motor: 3 HP, 220V, single-phase, 14.8A
  • Quick-release belt system
  • Sanding belt size: 4" x 78-3/4"
  • Platen size: 4-1/2" x 15-3/8"
  • 1HP Motor 
  • 177RPM Mill Speed
  • 110Volt 
  • 0-60º Angle Adjustment
$11,520.00
$9,489.00
  • Upgraded Vise Capacity 3/4" to 2-1/2" Tubing
  • Upgraded Adjustable Vise
  • Swivel Vise with 1° Increments
  • 75 to 250rpm Adjustable Cutter Speed
  • 1/4", 3/8", 1/2" Notching Capacity (Pip) 
  • Manual 
  • 17lbs 
  • 20"x7"x7" Dimensions 
  • Notching Capacity (OD) .75" - 3"
  • Angle Adjustment 0 – 60°
  • Belt Size 6" x 79"
  • Belt Speed 5400 (fpm)
$8,508.57
$7,009.00
  • Make perfect fit 90˚ notches
  • Notch up to schedule 40 pipe - FAST
  • Portable and easy to mount to any surface or bench vise
  • No set-up needed, simply insert pipe into correct die
    size hole and pull down on the handle
$349.00
  • Upgraded Vise Capacity 3/4" to 2" Tubing
  • Adjustable Vise
  • Swivel Vise with 1° Increments
  • 75 to 250rpm Adjustable Cutter Speed
  • Vise Capacity 3/4" to 2" Tubing
  • Adjustable Height Vise for Offset Notching
  • Swivel Vise with 1° Increments
  • 75 to 250rpm Adjustable Cutter Speed
  • 4" Belt Notcher
  • 4HP
  • Centering Vise
  • Adjustable Angle 30-90 Degree
$3,199.00
$2,995.00
  • Make perfect fit 90˚ notches
  • Easy, one pull on the handle will produce accurate saddle notches for weld fit-up
  • Portable and easy to mount to any surface or bench vise
  • No set-up needed, simply insert pipe into correct die
    size hole and pull down on the handle
  • Gear Drive
  • 38 strokes per minute
  • Ideal for high production 90 degree notching
  • Make perfect fit 90˚ notches
$3,799.00
$3,499.00
  • Upgraded Vise Capacity 3/4" to 2-3/8" Tubing
  • Larger V-Block Vise
  • Swivel Vise with 1° Increments
  • 75 to 250rpm Adjustable Cutter Speed
  • Outer Tube Diameter: 3/4", 1", 2"
  • Maximum Wall Thickness: .155"
  • Requires No Change-over
  • Call For Special Pricing