Machine

  • Layout
OZ Machine 230V 1.5HP Copy Router Machine (3 Motors) GALAXY - IV at Elite Metal Tools
OZ Machine 230V 1.5HP Copy Router Machine (3 Motors) GALAXY - IV
  • KW: 1.1
  • RPM: 12000
  • Hz: 200
  • Air consumption: 9 L / min
$14,500.00
As low as $471/mo
View Details
South Bend 9" x 42" with DRO Vertical Mill SB1024F at Elite Metal Tools
South Bend 9" x 42" with DRO Vertical Mill SB1024F
  • 1PH
  • Fagor DRO
  • Chromed Steel Quill
  • Cross Table Travel: 13"
$16,594.00
As low as $328/mo
View Details
Birmingham Vertical Milling Machine 10" x 54" Variable Speed BPV-1054 at Elite Metal Tools
Birmingham Vertical Milling Machine 10" x 54" Variable Speed BPV-1054
  • Class 7 Spindle, R-8 Spindle, Chromed Quill
  • Certified Meehanite Castings, Turcite B on Female Surfaces, 10″ x 54″ Table
  • Easy to Read Dials, One Shot Lubrication, Dove Tail Ways Table and Knee
  • Square Ways on Saddle, Hardened and Ground Table, Hardened and Ground X and Y Slideways
$15,137.50
$11,883.27
As low as $386/mo
View Details
Jet JTM-1 Step Pulley Milling Machine 230V 3Ph 690082 at Elite Metal Tools
Jet JTM-1 Step Pulley Milling Machine 230V 3Ph 690082
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
  • Precision bored and honed milling head
$14,423.57
$11,399.00
As low as $370/mo
View Details
Sharp Industries 220V 49” Digital Variable Speed Vertical Knee Mill LMV-49-DVS at Elite Metal Tools
Sharp Industries 220V 49” Digital Variable Speed Vertical Knee Mill LMV-49-DVS
  • Table Size: 9” x 49”
  • X, Y, Z Axis Travel: 36.6” x 12” x 15”
  • Spindle Nose Taper: R-8
  • Spindle Motor: 220V, 3HP
$15,045.00
As low as $297/mo
View Details
Jet JTM-1050 Mill With 2-Axis ACU-RITE G-2 MILLPWR CNC 690930 at Elite Metal Tools
Jet JTM-1050 Mill With 2-Axis ACU-RITE G-2 MILLPWR CNC 690930
  • 12.1" High resolution display (1024 x 768) with 3D graphics
  • Available offline software
  • Built-in calculator: Performs standard, trig, and geometry calculations and transfers them directly into part programs
  • Closed loop feedback using Acu-Rite precision linear encoders with 0.00005" resolution
  • Estimated run time feature
$59,129.91
$48,129.00
As low as $952/mo
View Details
Knuth 3HP 44"x10" UWF 1.1 Vertical Universal Milling Machine 362693 at Elite Metal Tools
Knuth 3HP 44"x10" UWF 1.1 Vertical Universal Milling Machine 362693
  • Table set up area: 44” x 10”
  • Number of T-slots: 3 positions
  • Table load capacity (max.): 550 lbs.
  • X-axis travel: 24”
$26,548.89
As low as $525/mo
View Details
Jet JTM-2 Step Pulley Milling Machine 115/230V 1Ph 690089 at Elite Metal Tools
Jet JTM-2 Step Pulley Milling Machine 115/230V 1Ph 690089
  • Certified Meehanite® castings
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
$14,151.43
$11,399.00
As low as $370/mo
View Details
Sharp Industries 220V 9” x 50” Variable Speed 3 Axes CNC Vertical Knee Mill LMV-50/MP-3 G2 at Elite Metal Tools
Sharp Industries 220V 9” x 50” Variable Speed 3 Axes CNC Vertical Knee Mill LMV-50/MP-3 G2
  • Table Size: 9” x 50”
  • X, Y, Z Axis Travel: 32”, 11”, 5”
  • Spindle: 60 - 4500 rpm
  • Motor: 220V, 3 HP
$45,735.00
As low as $905/mo
View Details
Sharp Industries 440V 9” x 50” Variable Speed 3 Axes CNC Vertical Knee Mill LMV-50/MP-3 G2 at Elite Metal Tools
Sharp Industries 440V 9” x 50” Variable Speed 3 Axes CNC Vertical Knee Mill LMV-50/MP-3 G2
  • Table Size: 9” x 50”
  • X, Y, Z Axis Travel: 32”, 11”, 5”
  • Spindle: 60 - 4500 rpm
  • Motor: 440V, 3 HP
$45,735.00
As low as $905/mo
View Details
Sharp Industries 220V 50” Variable Speed Vertical Knee Mill LMV-50 at Elite Metal Tools
Sharp Industries 220V 50” Variable Speed Vertical Knee Mill LMV-50
  • Table Size: 9” x 50”
  • X, Y, Z Axis Travel: 37” x 12” x 15”
  • Spindle Nose Taper: R-8
  • Spindle Motor: 220V, 3HP
$13,195.00
As low as $428/mo
View Details
Sharp Industries 440V 50” Variable Speed Vertical Knee Mill LMV-50 at Elite Metal Tools
Sharp Industries 440V 50” Variable Speed Vertical Knee Mill LMV-50
  • Table Size: 9” x 50”
  • X, Y, Z Axis Travel: 37” x 12” x 15”
  • Spindle Nose Taper: R-8
  • Spindle Motor: 440V, 3HP
$13,195.00
As low as $428/mo
View Details
Jet JVM-836-1 Mill With X-Axis Powerfeed 690156 at Elite Metal Tools
Jet JVM-836-1 Mill With X-Axis Powerfeed 690156
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
$12,807.14
$10,479.00
As low as $340/mo
View Details
Jet JMD-18PFN Mill/Drill With Power Downfeed 115/230V 1Ph 350020 at Elite Metal Tools
Jet JMD-18PFN Mill/Drill With Power Downfeed 115/230V 1Ph 350020
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
$5,325.71
$4,319.00
As low as $140/mo
View Details
Jet JMD-45GH Geared Head Square Column Mill/Drill with Newall DP500 2-Axis DRO 351158 at Elite Metal Tools
Jet JMD-45GH Geared Head Square Column Mill/Drill with Newall DP500 2-Axis DRO 351158
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
$10,821.44
$9,369.00
As low as $304/mo
View Details
Jet JTM-4VS Variable Speed Vertical Milling Machine 230/460V 3Ph 690182 at Elite Metal Tools
Jet JTM-4VS Variable Speed Vertical Milling Machine 230/460V 3Ph 690182
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
$15,162.86
$12,389.00
As low as $402/mo
View Details
Sharp Industries 220V 54” Variable Speed Large Vertical Knee Mill TMV at Elite Metal Tools
Sharp Industries 220V 54” Variable Speed Large Vertical Knee Mill TMV
  • Table Size: 10” x 54”
  • X, Y, Z Axis Travel: 39” x 16.3” x 5”
  • Spindle Nose Taper: R-8
  • Spindle Motor: 220V, 3HP
$17,895.00
As low as $354/mo
View Details
Sharp Industries 440V 54” Variable Speed Large Vertical Knee Mill TMV at Elite Metal Tools
Sharp Industries 440V 54” Variable Speed Large Vertical Knee Mill TMV
  • Table Size: 10” x 54”
  • X, Y, Z Axis Travel: 39” x 16.3” x 5”
  • Spindle Nose Taper: R-8
  • Spindle Motor: 440V, 3HP
$17,895.00
As low as $354/mo
View Details
Acra Variable Speed Vertical Mill LCM-42 at Elite Metal Tools
Acra Variable Speed Vertical Mill LCM-42
  • Table Size: 9” X 42” 
  • X, Y, Z Axis Travel: 30” X 12” X 23”
  • Motor: 3 H.P.
  • Spindle Nose: R-8
$11,714.00
As low as $380/mo
View Details
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X, Y and Z-Axis Powerfeeds and Power Draw Bar 690430 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X, Y and Z-Axis Powerfeeds and Power Draw Bar 690430
  • Adjustable gibs throughout
  • Heavy-duty spindle brake
  • Heavy-duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
$26,995.71
$21,879.00
As low as $432/mo
View Details
Knuth 3HP MF 1 VP Vertical Milling Machine 490006 at Elite Metal Tools
Knuth 3HP MF 1 VP Vertical Milling Machine 490006
  • Table set up area: 49” x 9”
  • Number of T-slots: 3 positions
  • Travel X-axis: 29.9”
  • 5 Year Parts Warranty 
$20,391.39
As low as $403/mo
View Details
Jet JMD-45VSPFT Variable Speed Geared Head Square Column Mill/Drill with Power Downfeed & Newall DP700 2-Axis DRO & X-Axis Powerfeed 351157 at Elite Metal Tools
Jet JMD-45VSPFT Variable Speed Geared Head Square Column Mill/Drill with Power Downfeed & Newall DP700 2-Axis DRO & X-Axis Powerfeed 351157
  • Easy to read internal depth gauge
  • Full power to the cutting tools through Variable Speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
  • Mill Drill Stand, p/n 350045, shown in some images, is optional
  • Milling table allows for movement
$15,607.14
$12,879.00
As low as $418/mo
View Details
Jet JMD-18 Mill/Drill With ACU-RITE 203 DRO 350401 at Elite Metal Tools
Jet JMD-18 Mill/Drill With ACU-RITE 203 DRO 350401
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
$7,721.26
$6,319.00
As low as $205/mo
View Details
Jet JMD-45VSPFT Variable Speed Geared Head Square Column Mill/Drill with Power Downfeed & Newall DP700 2-Axis DRO 351156 at Elite Metal Tools
Jet JMD-45VSPFT Variable Speed Geared Head Square Column Mill/Drill with Power Downfeed & Newall DP700 2-Axis DRO 351156
  • Easy to read internal depth gauge
  • Full power to the cutting tools through Variable Speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
  • Mill Drill Stand, p/n 350045, shown in some images, is optional
  • Milling table allows for movement
$13,681.43
$11,139.00
As low as $362/mo
View Details