Machine

  • Table Size: 10” x 50”
  • X, Y, Z Axis Travel: 31”, 15.5”, 5”
  • Spindle: 60 - 4500 rpm
  • Motor: 220V, 3 HP
$67,795
As low as $1,341.66/mo
  • Table Size: 10” x 50”
  • X, Y, Z Axis Travel: 31”, 15.5”, 5”
  • Spindle: 60 - 4500 rpm
  • Motor: 440V, 3 HP
$67,795
As low as $1,341.66/mo
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read external depth gauge
MSRP: $6,689.53
$5,310
As low as $172.57/mo
  • 12.1" High resolution display (1024 x 768) with 3D graphics
  • Available offline software
  • Built-in calculator: Performs standard, trig, and geometry calculations and transfers them directly into part programs
  • Closed loop feedback using Acu-Rite precision linear encoders with 0.00005" resolution
  • Estimated run time feature
MSRP: $54,462.53
$43,515
As low as $861.16/mo
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
MSRP: $9,122.07
$7,295
As low as $237.08/mo
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $17,973.99
$14,629
As low as $475.44/mo
  • Table Size: 10” x 54”
  • X, Y, Z Axis Travel: 31”, 15.5”, 5”
  • Spindle: 60 - 4500 rpm  
  • Motor: 220V, 3 HP
$58,995
As low as $1,167.51/mo
  • Table Size: 10” x 54”
  • X, Y, Z Axis Travel: 31”, 15.5”, 5”
  • Spindle: 60 - 4500 rpm  
  • Motor: 440V, 3 HP
$58,995
As low as $1,167.51/mo
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $13,514.26
$10,657
As low as $346.35/mo
  • Easy to read internal depth gauge
  • Full power to the cutting tools through Variable Speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
  • Mill Drill Stand, p/n 350045, shown in some images, is optional
  • Milling table allows for movement
MSRP: $18,244.26
$14,274
As low as $463.90/mo
  • Table Size: 19.68” x 86.62”
  • X & Y Axis Travel: 59” x 23.62”
  • Spindle Taper: NST #50
  • Spindle Motor: 220V, 20HP
$124,995
As low as $2,473.65/mo
  • KW: 1.1
  • RPM: 3000
  • Amp: 6.5 A
  • Air consumption: 5 L / min
$7,250
As low as $235.62/mo
  • Table Size: 10” x 54”
  • X, Y, Z Axis Travel: 31”, 15.5”, 5”
  • Spindle: 60 - 4500 rpm
  • Motor: 220V, 5 HP
$62,695
As low as $1,240.73/mo
  • Table Size: 10” x 54”
  • X, Y, Z Axis Travel: 31”, 15.5”, 5”
  • Spindle: 60 - 4500 rpm
  • Motor: 440V, 5 HP
$62,695
As low as $1,240.73/mo
  • Table Size: 9” x 49”
  • X, Y, Z Axis Travel: 31”, 11”, 5”
  • Spindle: 60 - 4500 rpm  
  • Motor: 220V, 3 HP
$55,495
As low as $1,098.24/mo
  • Table Size: 10” x 54”
  • X, Y, Z Axis Travel: 39” x 16.3” x 5”
  • Spindle Nose Taper: R-8
  • Spindle Motor: 220V, 3HP
$22,995
As low as $455.07/mo
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $25,677.07
$20,390
As low as $403.51/mo
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $28,515.07
$22,475
As low as $444.78/mo
  • Certified Meehanite® castings
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $16,217.07
$12,784
As low as $415.48/mo
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
  • Precision bored and honed milling head
MSRP: $16,352.26
$12,884
As low as $418.73/mo
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $24,190.53
$19,298
As low as $381.90/mo
  • Adjustable gibs throughout
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Precision bored and honed milling head
  • Precision hardened and ground ways and table
MSRP: $40,272.53
$31,932
As low as $631.93/mo