Floor Model Lathes

  • Capacity: 18" Swing Over Bend, 60" Between Centers
  • 12-Step Spindle Speed
  • 8"-Three-Jaw Chuck
  • Integrated Coolant System
MSRP: $48,651.45
$39,199
As low as $775.74/mo

  • Brass-tipped knockout bar concentrates the action in the sliding handle; the brass tip will not damage drive centers
  • Digital RPM readout for accurate speed adjustments
  • Redesigned tool rest geometry allows for better chisel movement along the tool rest
  • Set of dead centers which hold a spindle for visual comparison
  • Sliding headstock with electronic variable speed
MSRP: $7,297.72
$5,695
As low as $185.08/mo

  • Spindle Bore: 3.18”
  • Swing Over Bed: 16”
  • Spindle Speed: High: 235-2,000 rpm, Low: 20-170 rpm
  • Motor: 220V, 7.5 HP
$34,395
As low as $680.67/mo

  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $67,571.45
$53,147
As low as $1,051.77/mo

  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $25,406.80
$20,191
As low as $399.57/mo

  • Capacity 13" Swing Over Bend, 40' Between Centers
  • Mitutoyo 2-Axis DRO-Standard
  • 8-Step Spindle Speed
  • 6"-Three-Jaw Chuck
MSRP: $24,325.72
$19,399
As low as $383.90/mo

  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $22,771.53
$17,753
As low as $351.33/mo

  • Turning diameter over bed: 14”
  • Gap bridge length: 8”
  • Bed width: 8”
  • 5 Year Parts Warranty 
$18,655.56
As low as $369.19/mo

  • 6" 3-jaw direct mount chuck with top reversing jaw
  • Compound and cross slide have backlash elimination
  • Fast, easy speed changes
  • Hardened and ground gears are featured in the headstock and gearbox
  • Image shown with optional bench, p/n 321443AK
MSRP: $18,514.53
$14,472
As low as $470.34/mo

  • Swing Over Bed: 14.17"
  • Distance Between Centers: 35.82"
  • Spindle Bore / Bar Capacity: 1.81" / 1.41"
  • Boring Bar Diameter: 0.787"
$53,442.40
As low as $1,057.62/mo

  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $58,651.99
$46,594
As low as $922.09/mo

  • Compound and cross slide have backlash adjustment
  • Emergency stop within easy reach of the Operator
  • Enclosed gearbox design provides smooth, quiet operation
  • Gearbox gives wide range of inch & metric threading & feed capabilities with few gear changes
  • Mounted on stand with foot pedal, coolant and ready to use
MSRP: $22,433.72
$17,499
As low as $346.30/mo

  • Main Motor: 3 HP
  • Voltage: 220V AC / 1 PH/ 3 PH
  • Swing In Gap: 20"
  • Swing Over Bed: 14"
$18,012.50
As low as $356.46/mo

  • Patented vari-disc key provides up to 10 times the wear resistance than aluminum or brass keys
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
MSRP: $42,029.45
$33,223
As low as $657.48/mo

  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $65,544.26
$51,658
As low as $1,022.31/mo

  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $69,328.26
$54,438
As low as $1,077.32/mo

  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $61,895.45
$48,977
As low as $969.25/mo

  • Compound and cross slide have backlash adjustment
  • Emergency stop within easy reach of the Operator
  • Enclosed gearbox design provides smooth, quiet operation
  • Gearbox gives wide range of inch & metric threading & feed capabilities with few gear changes
  • Mounted on stand with foot pedal, coolant and ready to use
MSRP: $22,433.72
$17,504
As low as $346.40/mo

  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $40,677.99
$32,230
As low as $637.83/mo

  • Motor: 6HP - 230V - 3PH - 60Hz
  • Distance Between Centers: 60"
  • Number of Spindle Speeds: 16
  • Compound Travel: 5-1/2"
MSRP: $33,334
$29,412.13
As low as $582.06/mo

  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $55,678.80
$44,409
As low as $878.85/mo

  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $42,029.45
$33,223
As low as $657.48/mo

  • 6" 3-jaw direct mount scroll chuck with top reversing jaws
  • Automatic feeding and threading are fully interlocked
  • Carriage mounted spindle control lever
  • Centers and headstock center sleeves
  • Helical cut headstock gears reduce noise
MSRP: $17,784.79
$13,936
As low as $452.92/mo

  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $40,002.26
$31,734
As low as $628.01/mo