Floor Model Lathes

  • Layout
Jet ETM-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894129 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894129
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $45,407.99
$35,706
As low as $706.62/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894320 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894320
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $48,245.99
$38,948
As low as $770.78/mo
View Details
Jet GHB-1340A With Newall DP700 DRO With Taper Attachment 321115 at Elite Metal Tools
Jet GHB-1340A With Newall DP700 DRO With Taper Attachment 321115
  • 6" 3-jaw direct mount chuck with top reversing jaw
  • Compound and cross slide have backlash elimination
  • Gear box gives wide inch threading and feed capabilities with no gear changes
  • Hardened and ground gears are featured in the headstock and gearbox
  • Image shown with optional bench, p/n 321443AK
MSRP: $23,460.79
$18,761
As low as $371.28/mo
View Details
Jet E-1236VS With Collet Closer 892301 at Elite Metal Tools
Jet E-1236VS With Collet Closer 892301
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $26,487.99
$20,986
As low as $415.31/mo
View Details
Jet E-1340VS With ACU-RITE 203 DRO 892403 at Elite Metal Tools
Jet E-1340VS With ACU-RITE 203 DRO 892403
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $32,704.53
$26,372
As low as $521.90/mo
View Details
Jet GH-1440-3 with DP700 DRO 323411 at Elite Metal Tools
Jet GH-1440-3 with DP700 DRO 323411
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $35,137.07
$28,159
As low as $557.26/mo
View Details
Jet ETM-949 Mill with 2-Axis ACU-RITE 303 DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894136 at Elite Metal Tools
Jet ETM-949 Mill with 2-Axis ACU-RITE 303 DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894136
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $44,732.26
$35,209
As low as $696.78/mo
View Details
Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds 894363 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds 894363
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $44,867.45
$35,308
As low as $698.74/mo
View Details
Jet E-1340VS With Taper Attachment 892400 at Elite Metal Tools
Jet E-1340VS With Taper Attachment 892400
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $31,082.80
$25,180
As low as $498.31/mo
View Details
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X, Y, Z-Axis JET Powerfeeds 894356 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X, Y, Z-Axis JET Powerfeeds 894356
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $44,326.80
$34,911
As low as $690.88/mo
View Details
Jet EVS-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds 894370 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds 894370
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $46,083.72
$37,359
As low as $739.33/mo
View Details
Jet E-1440VS With ACU-RITE 303 DRO 892461 at Elite Metal Tools
Jet E-1440VS With ACU-RITE 303 DRO 892461
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $34,123.53
$27,414
As low as $542.52/mo
View Details
Jet E-1440VS With ACU-RITE 203 DRO With Taper Attachment 892454 at Elite Metal Tools
Jet E-1440VS With ACU-RITE 203 DRO With Taper Attachment 892454
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $37,569.72
$29,946
As low as $592.63/mo
View Details
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894357 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894357
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $47,570.26
$38,451
As low as $760.94/mo
View Details
Jet E-1440VS With Taper Attachment 892450 at Elite Metal Tools
Jet E-1440VS With Taper Attachment 892450
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $33,245.07
$26,769
As low as $529.75/mo
View Details
Palmgren 2HP 460V Three Phase 13” x 40” Engine Lathe with 2” Bore 9684550 at Elite Metal Tools
Palmgren 2HP 460V Three Phase 13” x 40” Engine Lathe with 2” Bore 9684550
  • Spindle Taper: MT 6
  • Number of Spindle Speeds: 8
  • Spindle Speed: 70 - 2000 RPM
  • Spindle Seat: Camlock D1-5
MSRP: $14,834
$13,088.60
As low as $425.37/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894341 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894341
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $48,651.45
$39,246
As low as $776.67/mo
View Details
Jet GH-1440-3 Lathe with Newall DP700 DRO and Taper Attachment 323413 at Elite Metal Tools
Jet GH-1440-3 Lathe with Newall DP700 DRO and Taper Attachment 323413
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $40,542.80
$32,131
As low as $635.87/mo
View Details
Jet ETM-949 Mill with 2-Axis ACU-RITE 203 DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894115 at Elite Metal Tools
Jet ETM-949 Mill with 2-Axis ACU-RITE 203 DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894115
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $43,245.72
$34,116
As low as $675.15/mo
View Details
Jet E-1440VS With Newall DP700 DRO With Collet Closer 892471 at Elite Metal Tools
Jet E-1440VS With Newall DP700 DRO With Collet Closer 892471
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $36,353.45
$29,053
As low as $574.95/mo
View Details
Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894364 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894364
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $49,191.99
$39,643
As low as $784.53/mo
View Details
Jet ETM-949 Mill with 2-Axis ACU-RITE 303 DRO 894130 at Elite Metal Tools
Jet ETM-949 Mill with 2-Axis ACU-RITE 303 DRO 894130
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $34,596.53
$27,762
As low as $549.40/mo
View Details
Jet E-1236VS With ACU-RITE 303 DRO With Taper Attachment and Collet Closer 892314 at Elite Metal Tools
Jet E-1236VS With ACU-RITE 303 DRO With Taper Attachment and Collet Closer 892314
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $32,434.26
$26,173
As low as $517.96/mo
View Details
Jet E-1340VS With ACU-RITE 303 CSS DRO With Collet Closer 892417 at Elite Metal Tools
Jet E-1340VS With ACU-RITE 303 CSS DRO With Collet Closer 892417
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $36,893.99
$29,450
As low as $582.81/mo
View Details