Floor Model Lathes

  • Layout
Jet BDB-919 Belt Drive Bench lathe 321378 at Elite Metal Tools
Jet BDB-919 Belt Drive Bench lathe 321378
  • Backlash adjustments provided throughout the carriage
  • Emergency stop within easy reach of the Operator
  • Full Length Splash Guard
  • Power longitudinal feed allows threading and reverse threading
  • Quick change gearbox provides wide range of inch and metric threads
$4,125.71
$3,469.00
As low as $112/mo
View Details
U.S. Industrial 13" x 40" Precision Geared Head Engine Lathe USL1340BH-KIT at Elite Metal Tools
U.S. Industrial 13" x 40" Precision Geared Head Engine Lathe USL1340BH-KIT
  • Swing Over Bed: 12.99”
  • Swing Over Cross-Slide: 7.79”
  • Swing Over Gap: 18.74”
  • Maximum Turning Length: 39.37”
$12,495.00
As low as $406/mo
View Details
Jet BDB-929 Belt Drive Bench lathe 321379 at Elite Metal Tools
Jet BDB-929 Belt Drive Bench lathe 321379
  • Backlash adjustments provided throughout the carriage
  • Emergency stop within easy reach of the Operator
  • Full Length Splash Guard
  • Power longitudinal feed allows threading and reverse threading
  • Quick change gearbox provides wide range of inch and metric threads
$4,541.43
$3,799.00
As low as $123/mo
View Details
U.S. Industrial 16" x 60" Precision Gear Head Engine Lathe USL1660CX-KIT at Elite Metal Tools
U.S. Industrial 16" x 60" Precision Gear Head Engine Lathe USL1660CX-KIT
  • Swing Over Bed: 16.53” (420mm)
  • Swing Over Cross-Slide: 8.85” (225mm)
  • Swing Over Gap: 21.65” (550mm)
  • Gap Length: 10.23” (260mm)
$26,595.00
As low as $526/mo
View Details
Jet GHB-1340A, Gear Head Bench Lathe 321357A at Elite Metal Tools
Jet GHB-1340A, Gear Head Bench Lathe 321357A
  • 6" 3-jaw direct mount chuck with top reversing jaw
  • Compound and cross slide have backlash elimination
  • D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings
  • Gearbox gives wide inch threading and feed capabiltites with no gear changes
  • Hardened and ground gears are featured in the headstock and gearbox
$11,424.29
$9,299.00
As low as $302/mo
View Details
Jet BDB-919 Belt Drive Bench lathe with stand 321370K at Elite Metal Tools
Jet BDB-919 Belt Drive Bench lathe with stand 321370K
  • Backlash adjustments provided throughout the carriage
  • Emergency stop within easy reach of the Operator
  • Full Length Splash Guard
  • Induction hardened and ground bedway
  • Power longitudinal feed allows threading and reverse threading
$4,640.00
$3,899.00
As low as $126/mo
View Details
Jet E-1440VS, Elite 14x40 EVS Lathe 892030 at Elite Metal Tools
Jet E-1440VS, Elite 14x40 EVS Lathe 892030
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
$24,775.71
$20,239.00
As low as $400/mo
View Details
Jet BDB-929 Belt Drive Bench lathe with stand 321372K at Elite Metal Tools
Jet BDB-929 Belt Drive Bench lathe with stand 321372K
  • Backlash adjustments provided throughout the carriage
  • Emergency stop within easy reach of the Operator
  • Full Length Splash Guard
  • Induction hardened and ground bedway
  • Power longitudinal feed allows threading and reverse threading
$5,070.00
$4,269.00
As low as $138/mo
View Details
Jet EGH-1740 With ACU-RITE 203 DRO With Taper Attachment and Collet Closer 892506 at Elite Metal Tools
Jet EGH-1740 With ACU-RITE 203 DRO With Taper Attachment and Collet Closer 892506
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
$59,517.71
$48,629.00
As low as $962/mo
View Details
Jet EGH-1740, Elite 17x40 Large Spindle Bore Geared Head Lathe 892100 at Elite Metal Tools
Jet EGH-1740, Elite 17x40 Large Spindle Bore Geared Head Lathe 892100
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
$43,598.57
$35,789.00
As low as $708/mo
View Details
U.S. Industrial 20" x 80" Precision Geared Head Engine Lathe USL20X80BH-KIT at Elite Metal Tools
U.S. Industrial 20" x 80" Precision Geared Head Engine Lathe USL20X80BH-KIT
  • Swing Over Bed: 19.7” (500mm)
  • Swing Over Cross-Slide: 11.8” (300mm)
  • Swing Over Gap: 28” (710mm)
  • Gap Length: 9.44” (240mm)
$35,595.00
As low as $704/mo
View Details
U.S. Industrial 16" x 40" Precision Gear Head Engine Lathe USL1640CX-KIT at Elite Metal Tools
U.S. Industrial 16" x 40" Precision Gear Head Engine Lathe USL1640CX-KIT
  • Swing Over Bed: 16.53” (420mm)
  • Swing Over Cross-Slide: 8.85” (225mm)
  • Swing Over Gap: 21.65” (550mm)
  • Gap Length: 10.23” (260mm)
$23,695.00
As low as $468/mo
View Details
Jet BDB-1340A, Belt Drive Bench Lathe 321360A at Elite Metal Tools
Jet BDB-1340A, Belt Drive Bench Lathe 321360A
  • 6" 3-jaw direct mount scroll chuck with top reversing jaws
  • Automatic feeding and threading are fully interlocked
  • Carriage mounted spindle control lever
  • Centers and headstock center sleeves
  • Feed selectors travel in grooved ways
$10,810.00
$8,799.00
As low as $285/mo
View Details
Jet EGH-1740 With Collet Closer 892501 at Elite Metal Tools
Jet EGH-1740 With Collet Closer 892501
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
$46,828.57
$38,349.00
As low as $758/mo
View Details
Jet GHB-1236 Geared Head Bench Lathe in Jet Metalworking, Turning, Lathes 321236 at Elite Metal Tools
Jet GHB-1236 Geared Head Bench Lathe in Jet Metalworking, Turning, Lathes 321236
  • Compound and cross slide have backlash adjustment
  • Emergency stop within easy reach of the Operator
  • Enclosed gearbox design provides smooth, quiet operation
  • Gearbox gives wide range of inch & metric threading & feed capabilities with few gear changes
  • Induction hardened and ground bedway
$12,284.29
$9,999.00
As low as $324/mo
View Details
Jet GH-1440-1 Geared Head Lathe 322830 at Elite Metal Tools
Jet GH-1440-1 Geared Head Lathe 322830
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
$18,427.14
$14,999.00
As low as $487/mo
View Details
Jet GH-1440B Geared Head Bench Lathe 331440 at Elite Metal Tools
Jet GH-1440B Geared Head Bench Lathe 331440
  • Compound and cross slide have backlash adjustment
  • Emergency stop within easy reach of the Operator
  • Enclosed gearbox design provides smooth, quiet operation
  • Gearbox gives wide range of inch & metric threading & feed capabilities with few gear changes
  • Spindle Spider available for ease of turning Gun barrels
$15,220.00
$12,389.00
As low as $402/mo
View Details
Jet GHB-1340A Lathe With Newall NMS300 DRO 323131 at Elite Metal Tools
Jet GHB-1340A Lathe With Newall NMS300 DRO 323131
  • 6" 3-jaw direct mount chuck with top reversing jaw
  • Compound and cross slide have backlash elimination
  • Fast, easy speed changes
  • Hardened and ground gears are featured in the headstock and gearbox
  • Image shown with optional bench, p/n 321443AK
$14,695.71
$12,129.00
As low as $394/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X, Y-Axis JET Powerfeeds 894347 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X, Y-Axis JET Powerfeeds 894347
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
$39,374.29
$32,049.00
As low as $634/mo
View Details
Jet EGH-1740 With ACU-RITE 303 DRO With Taper Attachment and Collet Closer 892510 at Elite Metal Tools
Jet EGH-1740 With ACU-RITE 303 DRO With Taper Attachment and Collet Closer 892510
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
$57,907.14
$47,269.00
As low as $935/mo
View Details
Jet GH-1440-3 Geared Head Lathe 322840 at Elite Metal Tools
Jet GH-1440-3 Geared Head Lathe 322840
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
$18,427.14
$14,999.00
As low as $487/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO 894344 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO 894344
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
$35,983.43
$29,289.00
As low as $579/mo
View Details
Jet E-1236VS, Elite 12x36 EVS Lathe 892000 at Elite Metal Tools
Jet E-1236VS, Elite 12x36 EVS Lathe 892000
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
$19,522.86
$15,899.00
As low as $314/mo
View Details
Jet GHB-1340A With CBS-1340A Stand 321101AK at Elite Metal Tools
Jet GHB-1340A With CBS-1340A Stand 321101AK
  • 6" 3-jaw direct mount chuck with top reversing jaw
  • Compound and cross slide have backlash elimination
  • Fast, easy speed changes
  • Hardened and ground gears are featured in the headstock and gearbox
  • Image shown with optional bench, p/n 321443AK
$12,071.43
$9,739.00
As low as $316/mo
View Details