Belt & Disc

  • Nameplate Output- .5
  • Number of Poles- 2
  • Voltage- 115 V
  • Supplied with 36 & 60 grit wheels and stamp steel tool rests
MSRP: $1,346
$1,149.78
As low as $37.36/mo
  • Frequency: 60 Hz
  • Nameplate Output: 0.75
  • Shaft Diameter/Taper: 0.625”/Straight
  • Speed: 3600 rpm
MSRP: $1,193
$965.88
As low as $31.39/mo
  • Nameplate Output- .75
  • Number of Poles- 2
  • Voltage- 460 V or 230 V or 208 V
  • Comes with 36 and 60 grit wheels, connected for 208-230 volts no power cord
MSRP: $2,087
$1,718.01
As low as $55.83/mo
  • HP: 3/4 HP
  • Belt Size: 2x48 in
  • Arbor Hole: 5/8 in
  • Height: 26
$749
As low as $24.34/mo
  • Motor: 3/4 HP
  • Belt Size: 4 x 36 in
  • Work Table Surface: 6-1/4 x 3 in
  • Dust collection port
$629
As low as $20.44/mo
  • 1PH amps: 11.5 amps
  • 24-1/2″ long steel reversible and replaceable platen.
  • Belt size: 4″ x 90″. All belt types are usable.
  • Belt speed: 7200 SFPM.
MSRP: $3,995
$3,831
As low as $124.50/mo
  • Grinder amp draws: 3PH 460V 5.9 amps
  • Dust collector amp draws: 3PH 460V 1.4 amps.
  • Belt speed: 6900 SFPM
  • Grinder switch: Magnetic on/off switch
MSRP: $6,395
$6,017
As low as $195.55/mo
  • Nameplate Output- .75
  • Number of Poles- 2
  • Voltage- 115 V
  • Supplied with 36 & 60 grit wheels, stamp steel tool rests, and factory connected for 115 volts, power cord supplied
MSRP: $2,038
$1,681.66
As low as $54.65/mo
  • Nameplate Output- .75
  • Number of Poles- 2
  • Voltage- 460 V or 230 V or 208 V
  • Factory connected for 208-230 volts, no power cord
MSRP: $1,503
$1,201.65
As low as $39.05/mo
  • Nameplate Output- 3
  • Number of Poles- 2
  • Voltage- 460 V or 230 V or 208 V
  • Factory connected for 230, manual starter, specify voltage when ordering
MSRP: $4,216
$3,369.10
As low as $109.49/mo
  • Fixed Speed: 5500 SFPM
  • Contact Wheel Size: 1” x 2"
  • Air Tension Quick Change Assembly
  • Motor: 1.5 HP 120V Single Phase
MSRP: $5,493
$4,877.88
As low as $158.53/mo
  • Nameplate Output- .5
  • Number of Poles- 4
  • Voltage- 460 V or 230 V or 208 V
  • Comes with 36 and 60 grit wheels, Cast iron tool rests, and connected for 208-230 volts no power cord
MSRP: $1,424
$1,212.27
As low as $39.39/mo
  • Frequency: 60 Hz
  • Nameplate Output: 0.5
  • Shaft Diameter/Taper: 0.625”/Straight
  • Speed: 3450 rpm
MSRP: $977
$799.86
As low as $25.99/mo
  • Driven Rollers: 3
  • Speeds: Single
  • Belt Speed (ft./min.): 5,500 fpm
  • Dust Collection: Integrated dust chute
MSRP: $1,695.39
$1,425
As low as $46.31/mo
  • Operate in a horizontal or vertical position
  • 1 HP 120v Motor
  • Comes with MT484 4x48 attachment
  • Quick change belt system
$828
As low as $26.91/mo
  • Motor: 1/2 HP
  • Belt Size: 1 x 42 in
  • Work Table Surface: 4-1/4 x 3 in
  • Full belt guard
  • Table Angle Adj: 45°
  • Belt Speed (ft./min.): 4712 fpm
  • Disc Speed: 3600 rpm
  • Grit: 80 (Disc and Belt)
MSRP: $1,351.39
$1,165
As low as $37.86/mo
  • Belt Size (L x W): 60" x 2"
  • Driven Rollers: 3
  • Speeds: Single
  • Contact Wheel Dia x Width: 7" x 2"
MSRP: $2,248.29
$1,829.99
As low as $59.47/mo
  • Number of Poles- 2
  • Voltage- 208 V or 230 V or 460 V
  • Phase- 3
  • Factory connected for 208-230 volts, no power cord
MSRP: $3,696
$2,901.38
As low as $94.29/mo
  • Nameplate Output- .5
  • Number of Poles- 2
  • Voltage- 230 V or 115 V
  • Comes with 36 and 60 grit wheels, cast iron tool rests, water pot, tool tray and lighted eye shields, and connected for 115 volts power cord included
MSRP: $1,791
$1,488.02
As low as $48.36/mo
  • Shaft Diameter: 0.75”
  • Speed: 3000 rpm/3600 rpm
  • Wheel Diameter: 6”
  • Wheel Bore Size: 1.25”
MSRP: $2,928
$2,413.51
As low as $78.43/mo
  • Grinder 3PH amps draws: 1.4
  • Vacuum 3PH FLA: 1.4 amps
  • SFPM: 5400
  • 3″ and 1.5″ serrated contact wheels on rotating platen
MSRP: $4,250
$4,079
As low as $132.56/mo
  • Nameplate Output- 5
  • Number of Poles- 4
  • Voltage- 575 V
  • Factory connected for 230, magnetic starter must be changed for other voltages
MSRP: $7,926
$6,391.63
As low as $207.72/mo
  • 9" aluminum disc reduces heat buildup and prolongs abrasive life
  • Cast iron work rests with tool-less adjustments
  • Contact wheel grinding with toolless access
  • Easy-to-use belt tracking.
  • Full guarding of all non-work contact points
MSRP: $933.69
$845
As low as $27.46/mo