Belt & Disc

  • CSA/CUS Certified
  • Heavy Cast Iron Bases
  • Oversized motor shafts, heavy retainer plates and massive lock nuts.
  • The wide range of spacer options allow you to run a huge variety of finishing wheels.
MSRP: $1,667.44
$1,425
As low as $46.31/mo

  • Nameplate Output- .75
  • Number of Poles- 2
  • Voltage- 575 V
  • Comes with 36 and 60 grit wheels, 575 volt 50//60 Hz
MSRP: $2,087
$1,718.01
As low as $55.83/mo

  • Frequency: 60 Hz
  • Nameplate Output: 0.5
  • Shaft Diameter/Taper: 0.375”/0.25”
  • Speed: 1725 rpm/3450 rpm
MSRP: $1,006
$815.61
As low as $26.50/mo

  • Nameplate Output- .5
  • Number of Poles- 2
  • Voltage- 115 V
  • Supplied with 36 grit and 0.014 wire wheel, stamp steel tool rests, and non-exhaust type wheel guards
MSRP: $1,124
$908.92
As low as $29.53/mo

  • Motor: 1 HP
  • Disc Speed: 3450 RPM
  • Belt Size: 6 x 48 in
  • Belt Table Size: 5-7/8 x 9-7/8 in
$945
As low as $30.71/mo

  • Frequency: 50 Hz
  • Nameplate Output: 0.25/0.06
  • Shaft Diameter/Taper: 0.375”/0.25”
  • Speed: 1500 rpm/3000 rpm
MSRP: $916
$743.06
As low as $24.14/mo

  • Shaft Diameter: 5/8"
  • Dust Collection: Integrated dust chute
  • Grit: 36 & 60
  • Wheel Size: 8" x 1" x 5/8" - Aluminum Oxide
MSRP: $647.14
$585
As low as $19.01/mo

  • Operate in a horizontal or vertical position
  • 1 HP 120v Motor
  • Comes with MT482 2x48 attachment
  • Quick change belt system
$737
As low as $23.95/mo

  • Nameplate Output- .75
  • Number of Poles- 4
  • Voltage- 230 V or 115 V
  • Comes with 36 and 60 grit wheels, water pot, tool tray, lighted eyeshields, and connected for 115 volts power cord included
MSRP: $2,459
$2,065.54
As low as $67.13/mo

  • Nameplate Output- .5
  • Number of Poles- 2
  • Voltage- 115 V
  • Comes with 36 and 60 grit wheels, stamp steel tool rests, and non-exhaust type wheel guards
MSRP: $1,124
$914.69
As low as $29.72/mo

  • Grinder 3PH amps draws: 2.8 amps
  • Vacuum 3PH FLA: 2.8 amps
  • SFPM: 5400
  • 3″ and 1.5″ serrated contact wheels on rotating platen
MSRP: $4,250
$4,079
As low as $132.56/mo

  • 10" Disc Sander
  • Vacuum Included
  • 1/2 HP Motor
  • Made in the USA
$1,389
As low as $45.14/mo

  • Extra large tilting table
  • Extra large tilting table lowers completely below disc for use of the entire disc surface
  • Low voltage protection switch
  • Precision table raiser utilizes a rack and gear mechanism for effortless operation
  • Rigid column and heavy duty base
MSRP: $4,439.31
$3,619
As low as $117.61/mo

  • Shaft Diameter: 5/8"
  • Belt Size L x W: 4" x 36"
  • Rpm: 3600
  • Dust Collection: Integrated dust chute
MSRP: $1,222.03
$1,045
As low as $33.96/mo

  • Frequency: 60 Hz
  • Nameplate Output: 0.75
  • Shaft Diameter/Taper: 0.625”/Straight
  • Speed: 3600 rpm
MSRP: $1,193
$965.88
As low as $31.39/mo

  • Nameplate Output- .75
  • Number of Poles- 2
  • Voltage- 460 V or 230 V or 208 V
  • Comes with 36 and 60 grit wheels, connected for 208-230 volts no power cord
MSRP: $2,087
$1,718.01
As low as $55.83/mo

  • Nameplate Output- .5
  • Number of Poles- 2
  • Voltage- 115 V
  • Supplied with 36 & 60 grit wheels and stamp steel tool rests
MSRP: $1,346
$1,149.78
As low as $37.36/mo

  • Motor 1.5 hp
  • Power 110V
  • Belt Size L x W 60" x 2"
  • Belt Speed (ft./min.) 800 - 8000 fpm (variable)

 

 

MSRP: $5,207.84
$4,239
As low as $137.76/mo

  • Fixed Speed: 4140 RPM
  • 5/8” Arbor Thread
  • Quick wheel change
  • Motor: 1.5 HP 120V Single Phase
MSRP: $1,730
$1,594.94
As low as $51.83/mo

  • 10″ disc sander with 4″ x 36″ belt sander
  • With full boxed OSHA guard, Horizontal or vertical belt position
  • 1/2 HP 1PH TEFC motor , 115 volts, 1 ph, 7.4 amps, 230 volt, 1 ph, 3.7 amps
  • Factory wired at 115 volt, 1 phase, 8 ft. 3 prong plug standard
$1,368
As low as $44.46/mo

  • Fixed Speed: 5500 SFPM
  • Contact Wheel Size: 1” x 2"
  • Manual Spring Tension Quick Change Assembly
  • Motor: 1.5 HP 120V Single Phase
MSRP: $3,935
$3,553.09
As low as $115.47/mo

  • Belt Size L x W: 48” x 2”
  • Belt Speed (ft./min.): 4712 fpm
  • Disc Diameter: 9"
  • Disc Speed: 3600 rpm
MSRP: $1,057.14
$910
As low as $29.57/mo

  • Volts: 115/230V
  • Amps AC: 12.6/6.3
  • Belt SFPM: 2258
  • Dust Chute Size: 4 in
MSRP: $1,733
$1,685
As low as $54.76/mo

  • Nameplate Output- .75
  • Number of Poles- 2
  • Voltage- 115 V
  • Supplied with 36 & 60 grit wheels, stamp steel tool rests, and factory connected for 115 volts, power cord supplied
MSRP: $2,038
$1,681.66
As low as $54.65/mo