Radial Arm Drills

U.S. Industrial Machinery 49" Radial Arm Drill Press USRD50-5

Drilling Capacity: 2"
Spindle Travel: 12.4"
Spindle Speeds: 25 to 2500 RPM
Morse Taper 5 Spindle

$31,595.00

As low as $625/mo

View Details

U.S. Industrial Machinery 32" Radial Arm Drill Press USRD32-4

Drilling Capacity: 1.5"
Spindle Travel: 9.4"
Spindle To Base: 4.72" to 33.85"
Morse Taper 4 Spindle

$14,195.00

As low as $461/mo

View Details

U.S. Industrial Machinery 63" Radial Arm Drill Press USRD64-5

Drilling Capacity: 2"
Spindle Travel: 12.4"
Spindle Feeds: .0016" to .126"
Morse Taper 5 Spindle

$34,795.00

As low as $688/mo

View Details

Knuth 20.1HP 20” R 100 Radial Drill Press 101659

Drilling depth (max.): 20”
Motor rating main drive : 20.1 Hp
Drilling capacity : 3.94”
Speed range: 8 rpm - 1000 rpm

$243,874.28

As low as $4,826/mo

View Details

Clausing Radial Drill | 49" ARM | 25"X24"X16" Table CLC1250H

Equipped with hydraulic separate clamping unit. Vertical movement of arm is coordinated by an IC timer. With a single touch on push button switch, you can have the arm unclamped then move vertically, or stop then clamp automatically. Very easy to operate, and tools will always stay at the same point after tool shifting
Powerful 5 Hp, 2-speed, heavy-duty spindle drive motor
Special automatic tool eject device is supplied to allow you to change tools quickly. (No drifter is required) Special arm elevating device is provided to prevent arm from falling down abruptly after years of usage
Coolant system
CSA Electrics Standard

$33,735.00

As low as $667/mo

View Details

Knuth 5HP 12” R 60 VT Radial Drill Press with Touchscreen Control Panel 101656

Drilling capacity: 2.36”
Drilling depth (max.): 12”
Speed range: 38 rpm - 2000 rpm
Motor rating main drive: 5.4 Hp

$52,214.17

As low as $1,033/mo

View Details

Knuth 5.4HP 12” R 60 V Radial Drill Press 101649

Drilling depth (max.): 12”
Drilling capacity: 2.44”
Motor rating main drive: 5.4 Hp
Speed range: 38 rpm - 2000 rpm

$49,064.44

As low as $970/mo

View Details

Clausing Radial Drill | 63" ARM | 19"X25"X19" Table CLC1600H

Equipped with hydraulic separate clamping unit. Vertical movement of arm is coordinated by an IC timer. With a single touch on push button switch, you can have the arm unclamped then move vertically, or stop then clamp automatically. Very easy to operate, and tools will always stay at the same point after tool shifting
Powerful 5 Hp, 2-speed, heavy-duty spindle drive motor
Special automatic tool eject device is supplied to allow you to change tools quickly. (No drifter is required) Special arm elevating device is provided to prevent arm from falling down abruptly after years of usage
CSA Electrics Standard

$42,825.00

As low as $847/mo

View Details

Clausing Radial Drill | 62" ARM | 27"X19"X15" Table (High Column) CL1600HX

High Column
Gears in gear box are cooled by oil cycled by an oil pump to minimize gear wear
Friction type disc clutch absorbs impact force caused by vertical movement of spindle, and protects all transmission units inside gear box. With quick spindle return, the clutch will help speed-up the tapping operation
Special automatic tool eject device is supplied to allow you to change tools quickly. (No drifter is required) Special arm elevating device is provided to prevent arm from falling down abruptly after years of usage

$86,095.00

As low as $1,703/mo

View Details

Sharp Industries 220V 10 HP Radial Drill RD-2500

Diameter to Column: 22”
Head Travel: 79”
Column to Spindle: 98”
Motor: 220V, 10 HP

$162,995.00

As low as $3,225/mo

View Details

Sharp Industries 440V 10 HP Radial Drill RD-2500

Diameter to Column: 22”
Head Travel: 79”
Column to Spindle: 98”
Motor: 440V, 10 HP

$162,995.00

As low as $3,225/mo

View Details

Knuth 10.1HP 16” R 80 V Radial Drill Press 101558

Drilling depth (max.): 16”
Drilling capacity : 3.15”
Speed range: 30 rpm – 1400 rpm
Motor rating main drive : 10.1 Hp

$113,554.91

As low as $2,247/mo

View Details

Acra Radial Arm Drill ARD1600H

Drilling Steel: 2 9/16"
Drilling Cast Iron: 2 3/4"
Spindle Taper: MT #5
Spindle Travel: 44 7/8"

$77,784.00

As low as $1,539/mo

View Details

Clausing Radial Drill | 62" ARM | 27"X19"X15" Table CL1600H

Gears in gear box are cooled by oil cycled by an oil pump to minimize gear wear
Friction type disc clutch absorbs impact force caused by vertical movement of spindle, and protects all transmission units inside gear box. With quick spindle return, the clutch will help speed-up the tapping operation
Special automatic tool eject device is supplied to allow you to change tools quickly. (No drifter is required) Special arm elevating device is provided to prevent arm from falling down abruptly after years of usage
CSA Electrics Standard

$80,650.00

As low as $1,596/mo

View Details

Acra Radial Arm Drill ARDC2500

Drilling Steel: 3 1/8"
Drilling Cast Iron: 3 15/16"
Spindle Stroke: 450
Spindle RPM: 16-1250

$161,515.00

As low as $3,196/mo

View Details

Clausing Radial Drill | 48" ARM | 25"X20"X16" Table CL1230H

High-quality cast-iron arm with heat-treated and ground slides for smooth and accurate head positioning
The bearing bracket for gear-box is fitted with standard bearings to fit arm slide for smooth gear-box operation
Equipped withhydraulic clamping. With a push of a button you can have arm unclamped then move vertically, or stop then clamp automatically
CSA Electrics Standard

$31,095.00

As low as $615/mo

View Details

Sharp Industries 220V 7.5 HP Radial Drill RD-1600

Diameter to Column: 17”
Head Travel: 50”
Column to Spindle: 63”
Motor: 220V, 7.5 HP

$73,000.00

As low as $1,444/mo

View Details

Sharp Industries 440V 7.5 HP Radial Drill RD-1600

Diameter to Column: 17”
Head Travel: 50”
Column to Spindle: 63”
Motor: 440V, 7.5 HP

$73,000.00

As low as $1,444/mo

View Details

Acra Radial Arm Drill ARD2000H

Drilling Steel: 2 9/16"
Drilling Cast Iron: 2 3/4"
Spindle Diameter: 2 1/2"
Spindle RPM: 35-1890

$106,667.00

As low as $2,110/mo

View Details

Acra Radial Arm Drill FRD1300

Tapping Capacity Steel: 1 9/16"
Spindle Stroke: 9 7/8"
Spindle Speed (# Steps): (12) 44~1500 RPM
Voltage: 220V / 3 PH (2 Speed)

$34,585.00

As low as $684/mo

View Details

Knuth 3HP 1.57” R 40 V Radial Drilling Machine 101557

Drilling capacity: 1.57”
Drilling depth (max): 10”
Arm stroke (vertical): 25”
Motor rating main drive: 3HP

$37,661.94

As low as $745/mo

View Details

Clausing Radial Drill | 78" ARM | 39"X31"X19" Table CL2000H

Gears in gear box are cooled by oil cycled by an oil pump to minimize gear wear
Friction type disc clutch absorbs impact force caused by vertical movement of spindle, and protects all transmission units inside gear box. With quick spindle return, the clutch will help speed-up the tapping operation
Coolant system
CSA Electrics Standard

$103,745.00

As low as $2,053/mo

View Details

Clausing Radial Drill | 98" ARM | 39"X31"X22" Table CLC2500

Friction type disc clutch absorbs impact force caused by vertical movement of spindle, and protects all transmission units inside gear box. With quick spindle return, the clutch will help speed-up the tapping operation
Special automatic tool eject device is supplied to allow you to change tools quickly. (No drifter is required) Special arm elevating device is provided to prevent arm from falling down abruptly after years of usage
Coolant system
Equipped with hydraulic separate clamping unit. Vertical movement of arm is coordinated by an IC timer. With a single touch on push button switch, you can have the arm unclamped then move vertically, or stop then clamp automatically. Very easy to operate, and tools will always stay at the same point after tool shifting
CSA Electrics Standard

$158,645.00

As low as $3,139/mo

View Details