Floor Drill Presses

  • Layout
Baileigh Gear Driven Drill Press DP-1000G at Elite Metal Tools
Baileigh Gear Driven Drill Press DP-1000G
  • 1.5HP Motor 
  • 5/8" Tapping Capacity 
  • 1" Drill Capacity 
  • 5.3" Spindle Travel 
$5,772.86
$4,699.00
As low as $152/mo
View Details
Baileigh Gear Driven Drill Press DP-1850G at Elite Metal Tools
Baileigh Gear Driven Drill Press DP-1850G
  • 2 hp motor runs on 220-volt 3-phase power.
  • 26-3/4” swing to tackle large pieces of material
  • Drills a maximum capacity of 1.57” with a tapping capacity of up to 1”
  • Massive column and cast steel base reduce flexing even when you’re drilling at full capacity
$14,741.43
$11,999.00
As low as $389/mo
View Details
Baileigh Drill Press DP-1500G at Elite Metal Tools
Baileigh Drill Press DP-1500G
  • 3.5HP Motor 
  • 1.5" Drill Capacity 
  • 108-1800rpm Spindle Speed
  • 7.48" Spindle Travel 

 

$7,247.14
$5,899.00
As low as $191/mo
View Details
Baileigh Industrial 0.5HP 115V Drill Press DP-0625E 1022127 at Elite Metal Tools
Baileigh Industrial 0.5HP 115V Drill Press DP-0625E 1022127
  • Spindle Speeds: 5
  • Spindle Taper: B16
  • Rpm: 250, 700, 1150, 1900, & 2900
  • Drill Capacity Steel: 5/8"
$1,767.71
$1,475.00
As low as $47/mo
View Details
Baileigh Industrial 0.5HP 115V Metal Belt Driven Drill Press DP-1000E 1022128 at Elite Metal Tools
Baileigh Industrial 0.5HP 115V Metal Belt Driven Drill Press DP-1000E 1022128
  • Drill Capacity Steel: 1"
  • Spindle Travel: 3"
  • Base Size: 23" x 16"
  • Rpm: 250, 700, 1150, 1900, & 2900
$2,329.57
$1,899.00
As low as $61/mo
View Details
Palmgren 1HP Single Phase 17” 16-Speed Floor Step Pulley Drill Press 9680177 at Elite Metal Tools
Palmgren 1HP Single Phase 17” 16-Speed Floor Step Pulley Drill Press 9680177
  • Voltage: 120/240
  • Amps: 10/5 A
  • Capacity Cast Iron: 5/8 in
  • RPM: 138-3476
$1,299.00
As low as $42/mo
View Details
Palmgren 230V Three Phase 20” Power Feed Gear Head Drill Press with Foot Reversing Switch 9680246 at Elite Metal Tools
Palmgren 230V Three Phase 20” Power Feed Gear Head Drill Press with Foot Reversing Switch 9680246
  • Capacity Steel: 1"
  • Capacity Cast Iron: 1-1/8"
  • Power Feed: Yes
  • Number Of Speeds: 8
$9,375.00
As low as $304/mo
View Details
Palmgren 1.5HP 240V Three Phase 20" 16-Speed Floor Step Pulley Drill Press 9680210 at Elite Metal Tools
Palmgren 1.5HP 240V Three Phase 20" 16-Speed Floor Step Pulley Drill Press 9680210
  • Capacity Cast Iron: 9/16 in
  • RPM: 120-3605
  • Spindle Taper: MT3
  • Spindle Travel: 5 in
$1,975.00
As low as $64/mo
View Details
Palmgren 2HP 230V Three Phase 20” GH Drill Press 9680134 at Elite Metal Tools
Palmgren 2HP 230V Three Phase 20” GH Drill Press 9680134
  • Spindle Travel: 5 in
  • Capacity Cast Iron: 1 - 1/8 in
  • Table Work Surface: 15.5 x 14.75 in
  • Capacity Steel: 1 in
$6,800.00
$6,375.00
As low as $207/mo
View Details
Palmgren 22” Gear Head Drill Press with Mechanical Clutch Powerfeed 9680212 at Elite Metal Tools
Palmgren 22” Gear Head Drill Press with Mechanical Clutch Powerfeed 9680212
  • Motor: 2HP - 240V - 3PH - 60Hz
  • Number of Speeds: 12
  • Table Work Surface: 16-3/4" x 17-1/2"
  • Spindle to Table: 29-3/4"
$6,667.00
$6,250.31
As low as $203/mo
View Details
Palmgren 1.5HP 230V Three Phase 20” Gear Head Drill Press with Foot Reversing Switch 9680243 at Elite Metal Tools
Palmgren 1.5HP 230V Three Phase 20” Gear Head Drill Press with Foot Reversing Switch 9680243
  • Capacity Steel: 1"
  • Capacity Cast Iron: 1-1/8"
  • Power Feed: No
  • Number Of Speeds: 8
$7,250.00
As low as $235/mo
View Details
Palmgren 1HP 115V Single Phase 16" 16-Speed Step Pulley Floor Drill Press 9680214 at Elite Metal Tools
Palmgren 1HP 115V Single Phase 16" 16-Speed Step Pulley Floor Drill Press 9680214
  • Drilling capacity in steel: Ø 1.103 in
  • Quill Travel: 4.134 in
  • Number of pulley steps: 16 steps
  • Distance spindle - table (max.): 33.858 in
$3,200.00
$3,000.00
As low as $97/mo
View Details
Palmgren 20” Gear Head Drill Press 9680223 at Elite Metal Tools
Palmgren 20” Gear Head Drill Press 9680223
  • Motor: 1-1/2 - 2HP - 240V - 3PH - 60Hz
  • Number of Speeds: 8
  • Spindle Travel: 8"
  • Table Work Surface: 15-1/2" x 14 - 13/16"
$5,360.00
$5,025.00
As low as $163/mo
View Details
Palmgren 230V Three Phase 26” Gear Head Drill Press with Foot Reversing Switch 9680248 at Elite Metal Tools
Palmgren 230V Three Phase 26” Gear Head Drill Press with Foot Reversing Switch 9680248
  • Capacity Steel: 1-1/8"
  • Capacity Cast Iron: 1-1/4"
  • Power Feed: No
  • Number Of Speeds: 8
$8,125.00
As low as $264/mo
View Details
Palmgren 115V Single Phase 20” Gear Head Drill Press 9680245 at Elite Metal Tools
Palmgren 115V Single Phase 20” Gear Head Drill Press 9680245
  • Capacity Steel: 1"
  • Capacity Cast Iron: 1-1/8"
  • Power Feed: No
  • Number Of Speeds: 8
$7,813.00
As low as $253/mo
View Details
Palmgren 3HP 230V Three Phase 22” GH Drill Press 9680135 at Elite Metal Tools
Palmgren 3HP 230V Three Phase 22” GH Drill Press 9680135
  • Spindle Speed: 60 to 3600
  • Capacity Cast Iron: 1 - 1/4 in
  • Table Work Surface: 16.5 x 15.75 in
  • Capacity Steel: 1 - 1/16 in
$8,301.00
$7,782.19
As low as $252/mo
View Details
Palmgren 22” Gear Head Drill Press with Electro-Magnetic Clutch Powerfeed 9680225 at Elite Metal Tools
Palmgren 22” Gear Head Drill Press with Electro-Magnetic Clutch Powerfeed 9680225
  • Motor: 2HP - 240V - 3PH - 60Hz
  • Number of Speeds: 12
  • Table Work Surface: 16-3/4" x 17-1/2"
  • Spindle to Table: 29-3/4"
$7,173.00
$6,724.69
As low as $218/mo
View Details
Palmgren 3HP 230V Three Phase 22” 9-Speed Step Pulley Floor Drill Press 9680216 at Elite Metal Tools
Palmgren 3HP 230V Three Phase 22” 9-Speed Step Pulley Floor Drill Press 9680216
  • Drilling capacity in steel: Ø 1.336 in
  • Working Range: 22 in
  • Quill Travel: 6.299 in
  • Distance spindle - table (max.): 33.858 in
$5,368.00
$5,032.50
As low as $163/mo
View Details
Palmgren 2HP 230V Single Phase 16” Variable Speed Floor Drill Press 9680217 at Elite Metal Tools
Palmgren 2HP 230V Single Phase 16” Variable Speed Floor Drill Press 9680217
  • Spindle Speeds: 35 - 4000 RPM
  • Drilling capacity in steel: Ø 1.104 in
  • Working Range: 16 in
  • Distance spindle - table (max.): 33.858 in
$6,313.00
$5,918.44
As low as $192/mo
View Details
Palmgren 1.5HP Single Phase 20" 16-Speed Floor Step Pulley Drill Press 9680209 at Elite Metal Tools
Palmgren 1.5HP Single Phase 20" 16-Speed Floor Step Pulley Drill Press 9680209
  • Voltage: 120/240
  • Amps: 10/5 A
  • Capacity Cast Iron: 9/16 in
  • RPM: 120-3605
$1,799.00
As low as $58/mo
View Details
Palmgren 230V Three Phase 32” GH Drill Press 16-S 9680137 at Elite Metal Tools
Palmgren 230V Three Phase 32” GH Drill Press 16-S 9680137
  • Spindle Travel: 7-7/8 in
  • Capacity Cast Iron: 2 - 1/8 in
  • HP: 4-5
  • Capacity Steel: 2 in
$17,333.00
$16,249.69
As low as $321/mo
View Details
Palmgren 230V Three Phase 26” Power Feed Gear Head Drill Press with Foot Reversing Switch 9680250 at Elite Metal Tools
Palmgren 230V Three Phase 26” Power Feed Gear Head Drill Press with Foot Reversing Switch 9680250
  • Capacity Steel: 1-1/8"
  • Capacity Cast Iron: 1-1/4"
  • Power Feed: Yes
  • Number Of Speeds: 8
$11,500.00
As low as $373/mo
View Details
Palmgren 460V Three Phase 20” Power Feed Gear Head Drill Press with Foot Reversing Switch 9680247 at Elite Metal Tools
Palmgren 460V Three Phase 20” Power Feed Gear Head Drill Press with Foot Reversing Switch 9680247
  • Capacity Steel: 1"
  • Capacity Cast Iron: 1-1/8"
  • Power Feed: Yes
  • Number Of Speeds: 8
$9,750.00
As low as $316/mo
View Details
Palmgren 1HP 240V Three Phase 17” 16-Speed Floor Step Pulley Drill Press 9680178 at Elite Metal Tools
Palmgren 1HP 240V Three Phase 17” 16-Speed Floor Step Pulley Drill Press 9680178
  • Amps: 5 A
  • Capacity Cast Iron: 5/8 in
  • RPM: 138-3476
  • Spindle Taper: MT2
$1,325.00
As low as $43/mo
View Details