Abrasive Chop Saws

  • OSHA safety clamshell wheel guard
  • 1" spindle, sealed ball bearings
  • Two easy-set screw vises to hold work on both sides
  • Options: #12L steel stand and AV-18 air vises
$3,095.00
$2,945.00
  • Totally Enlcosed Cabinet, Side Access Ports For Long Stock
  • 15HP Motor 
  • V-Belt Drive, Sealed Ball Bearings 
  • Air Chain Vise 
  • 5HP Motor
  • U.S.A Made
  • 2200 RPM at Spindle
  • 1" Spindle Arbor
$4,800.00
$4,695.00
  • 100" made in USA
  • 1/2" wheel arbor, 8" abrasive wheel
  • 1PH or 3PH
  • Optional steel stand #12P
  • Capacity: 1.5" solids, 2.5" pipe
  • Optional steel stand
  • Spindle RPM- 3450
  • Cuts hardened material like butter
  • 5 HP, TEFC. 3 PH motor (220 or 440V)
  • Spindle RPM - 4400.
  • Dimensions - L 22" x W 14" x H 24".
  • Bench Model.
$2,250.00
$2,175.00
  • Comes with stand and chain vise
  • 3450 RPM, 4400 spindle RPM.
  • 5HP TEFC motor 3 phase 220/440 volt
  • Made in the USA
  • Mounted on a DCV-6 dust collector/vacuum
  • Manual switch on saw and dust collector
  • Uses 12″ or 14″ abrasive wheels. 1″ wheel arbor
  • 4400 Spindle RPM
$4,500.00
$4,375.00
  • Comes with stand and chain vise
  • 3450 RPM, 4400 spindle RPM.
  • 5HP TEFC motor,1phase 220v 
  • Made in the USA
$2,880.00
$2,795.00
  • 20" Manual Wet-Cut Abrasive Saw 
  • Cast Iron Arm, Trunnions 
  • Integral Tank And Pump 
  • 15 HP Motor
  • Cuts 0 to 45 Degrees - Left or Right 
  • Positive Index Holes 
  • Two Cam-Lock Vises 
  • 10" Blade - 5/8" Arbor 
  • Spindle RPM 2500
  • Rugged Cast Iron Arm And Trunnion 
  • 0-45 Degree Left or Right
  • 3" Sraight Solid 
  • Capacity 4" Solid, 6" Shapes 
  • Air Chain Vise 
  • Cast iron Upper Arm/Trunnions 
  • 20 HP Motor
$14,500.00
$14,195.00
  • Swivel cam vise opens 4″ – fast, lever-lock. Work length stop
  • Capacity: 1 .5″ solids, 2 1/2″ pipe
  • 5/8″ arbor, sealed-for-life bearings,10″ abrasive wheel, 3 HP
  • Available in 1 ph 110/220 or 3 ph 220/440
  • 20" Abrasive Wheel 
  • Rugged Cast iron Trunnion & Arm 
  • 1" Wheel Arbor 
  • Sealed Ball Bearings 
$4,975.00
$4,875.00
  • 16", 18" or 20" Arm Assembly
  • Abrasive or Non-Ferrous Blades
  • Dual Trunnion Mount
  • 1" Arbor
$3,700.00
$3,595.00
  • For 10" Arm Assembly
  • Manual Switch
  • 4 Bolt Mounting
  • NO Abrasive Wheel Included
  • Extra-heavy Cast iron base, trunnion and arm.
  • 5HP, TEFC. 1 PH (220 Volt only) 
  • Spindle RPM - 4400.
  • Dimensions - L 22" x W 14" x H 24".
$2,720.00
$2,625.00
  • Arm Assembly for 12" to 14" 
  • NO Abrasive Wheel Included
  • 4 Bolt Mounting
  • 200 Lbs

 

  • Mounted on a DCV-6 dust collector/vacuum
  • Manual switch on saw and dust collector
  • Uses 12″ or 14″ abrasive wheels. 1″ wheel arbor
  • 4400 Spindle RPM
$4,975.00
$4,825.00
  • Fast, Foot-Operated Chain Vise 
  • 16"-18" Diameter Abrasive Wheel (not included) 
  • 1" Wheel Arbor 
  • Sealed Ball Bearings 
  • 10" High speed nonferrous saw for cutting aluminum, brass and plastic
  • 3.25" round solid capacity
  • Uses high speed carbide tipped blade (non included)
  • Single quick release cam-lock vise
$1,380.00
$1,349.00
  • 26" Wet Abrasive Chop Saw
  • 1800 Spindle RPM
  • 3Phase 220Volt or 440Volt
  • 2HP
  • Manual Operation 
  • Dual 3" Vises 
  • Internal Lite 
  • Magnetic Switch