Abrasive Chop Saws

  • 5HP Motor
  • U.S.A Made
  • 2200 RPM at Spindle
  • 1" Spindle Arbor
  • 14" Blade, 1" Arbor, 5HP 
  • Mitres Either Direction 45 Degrees 
  • Spindle RPM 4400 
  • Heavy Duty Stand 
  • Manual Operation 
  • Dual 3" Vises 
  • Internal Lite 
  • Magnetic Switch 
$6,950.00
$6,422.00
  • 20" Abrasive Wheel 
  • Rugged Cast iron Trunnion & Arm 
  • 1" Wheel Arbor 
  • Sealed Ball Bearings 
  • Totally Enlcosed Cabinet, Side Access Ports For Long Stock
  • 15HP Motor 
  • V-Belt Drive, Sealed Ball Bearings 
  • Air Chain Vise 
  • Totally Enlcosed Cabinet, Side Access Ports For Long Stock
  • 15HP Motor 
  • V-Belt Drive, Sealed Ball Bearings 
  • Air Chain Vise 
  • Fast, Foot-Operated Chain Vise 
  • 16"-18" Diameter Abrasive Wheel (not included) 
  • 1" Wheel Arbor 
  • Sealed Ball Bearings 
  • 14" Blade, 1" Arbor, 5HP 
  • Mitres Either Direction 45 Degrees 
  • Spindle RPM 4400 
  • Heavy Duty Stand 
$4,150.00
$4,062.00
  • 20" Abrasive Wheel 
  • Rugged Cast iron Trunnion & Arm 
  • 1" Wheel Arbor 
  • Sealed Ball Bearings 
  • 12"-14" 
  • Dual Moveable 4" Screw Vises 
  • Semi-Automatic, Air/Oil Power Down Feed 0-12FPM
  • Dual Coolant Nozzels 
$19,500.00
$18,489.00
  • 5 HP, TEFC. 1 PH motor (220V).
  • Spindle RPM - 4400.
  • Dimensions - L 22" x W 14" x H 24".
  • Extra-heavy Cast iron base, trunnion and arm.

 

$2,795.00
$2,717.00
  • Mitres left and right to 45 deg.
  • Good for cutting aluminum and other non-ferrous material with steel blade
  • Double air vises
  • OHSA saferty blade guard
$8,995.00
$8,428.00
  • 100" made in the USA
  • Heavy-duty cast iron base and trunnion
  • Cam lock vise
  • Capacities: 1.5" solids, 2.5" pipe
$4,450.00
$4,179.00
  • Mitres 45 deg. left or right
  • Dual cam vises open to 6"
  • OSHA safety blade guard
  • Great for aluminum, brass or plastic
$4,575.00
$4,428.00
  • Cuts 0 to 45 Degrees - Left or Right 
  • Positive Index Holes 
  • Two Cam-Lock Vises 
  • 10" Blade - 5/8" Arbor 
  • 30HP Motor 
  • Cam Vise - 4-1/2" High 
  • 1" Arbor 
  • Spindle Speed 1800 RPM 
  • 5 HP, TEFC. 3 PH motor (220 or 440V)
  • Spindle RPM - 4400.
  • Dimensions - L 22" x W 14" x H 24".
  • Stock stand included.
  • 5 HP, TEFC. 3 PH motor (220 or 440V)
  • Spindle RPM - 4400.
  • Dimensions - L 22" x W 14" x H 24".
  • Bench Model.
  • Spindle Arbor Size: 1”
  • Spindle RPM: 2500
  • Capacities: 4″ solid, 6″ shapes@ 90 degrees, 3″ solid, 5″ shapes@ 45 degrees Left OR Right
  • 20HP unit amp draws: 220V 46 amps and 440V 23 amps
  • Switch Type: Magnetic
  • Cutoff Wheel Size: 16” – 18”
  • Portable: Two Locking Casters
  • Spindle Arbor Size: 1”
  • Max Depth Cut: 5” deep
  • Cuttable Material: Aluminum, Brass, Bronze, Copper, Fiberglass, Lead Sheets, Plastic, Steel
  • Can do the following cuts: Bevel, Compound Miter, Crosscut, Miter
  • Pneumatic Clamping Ability: Yes
  • 100% made in the USA
  • Spindle RPM - 4800
  • Optional steel stand #12P
  • 1/2" wheel arbor, 7" diameter abrasive wheel
  • Max Depth Cut: 5” deep
  • Cuttable Material: Aluminum, Brass, Bronze, Copper, Fiberglass, Lead Sheets, Plastic, Steel
  • Can do the following cuts: Bevel, Compound Miter, Crosscut, Miter
  • Pneumatic Clamping Ability: Yes
  • Spindle RPM 2500
  • Rugged Cast Iron Arm And Trunnion 
  • 0-45 Degree Left or Right
  • 3" Sraight Solid