By Category

Hoists & Cranes

  • Layout
Jet TS300-230-020,3-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT300 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 140118K at Elite Metal Tools
Jet TS300-230-020,3-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT300 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 140118K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $16,697.99
$9,295
As low as $302.08/mo
View Details
Jet 5-Ton Two Speed Electric Chain Hoist 3-Phase 15 'Lift | TS500-460-015 144014 at Elite Metal Tools
Jet 5-Ton Two Speed Electric Chain Hoist 3-Phase 15 'Lift | TS500-460-015 144014
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $18,524.99
$10,230
As low as $332.47/mo
View Details
Jet 1/8-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS018-020 104002 at Elite Metal Tools
Jet 1/8-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS018-020 104002
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • Hoist carries a dust and moisture rating of IP-55 and the wireless transmitter IP-65 which means hoist can stay in the light rain and pendant is dust and water proof.
MSRP: $6,137.99
$3,485
As low as $113.26/mo
View Details
Jet TS300-230-010,3-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT300 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 140116K at Elite Metal Tools
Jet TS300-230-010,3-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT300 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 140116K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $15,755.99
$8,675
As low as $281.93/mo
View Details
Jet 3-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS300-460-015 144011 at Elite Metal Tools
Jet 3-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS300-460-015 144011
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $13,738.99
$7,635
As low as $248.13/mo
View Details
Jet JLH-150WO-15, 1-1/2 Ton, Lever Hoist with 15' Lift with Overload Protection 376302 at Elite Metal Tools
Jet JLH-150WO-15, 1-1/2 Ton, Lever Hoist with 15' Lift with Overload Protection 376302
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $919.99
$605
As low as $19.66/mo
View Details
Bison Lifting Equipment 1/2 Ton Manual 20 FT Lifting Chain Hoist with Premium Galvanized Chain CH05-20-G at Elite Metal Tools
Bison Lifting Equipment 1/2 Ton Manual 20 FT Lifting Chain Hoist with Premium Galvanized Chain CH05-20-G
  • 1/2 Ton Lifting Capacity
  • 20 Ft Standard lift
  • Premium Galvanized load Chain
  • Double-Pawl Load Brake
$389.73
View Details
Jet TS500-230-010,5-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT500 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 140127K at Elite Metal Tools
Jet TS500-230-010,5-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT500 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 140127K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $19,929.99
$10,955
As low as $356.03/mo
View Details
Jet 1-Ton Hand Chain Hoist with 15' Lift | S90-100-15 101911 at Elite Metal Tools
Jet 1-Ton Hand Chain Hoist with 15' Lift | S90-100-15 101911
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $397.99
$265
View Details
Jet 1-PT, 1-Ton Heavy Duty Manual Trolley 252010 at Elite Metal Tools
Jet 1-PT, 1-Ton Heavy Duty Manual Trolley 252010
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened large steel wheels and thicker double sealed lubricated ball bearings provide smooth movement
  • Welded heavy gauge steel frame and powder coat finish provide maximum durability and protection
MSRP: $288.99
$205
View Details
Jet 1-Ton Hand Chain Hoist with 10' Lift | S90-100-10 101910 at Elite Metal Tools
Jet 1-Ton Hand Chain Hoist with 10' Lift | S90-100-10 101910
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $351.99
$245
View Details
Jet 20-Ton Hand Chain Hoist with 15' Lift & Overload Protection | L-100-2000WO-15 108015 at Elite Metal Tools
Jet 20-Ton Hand Chain Hoist with 15' Lift & Overload Protection | L-100-2000WO-15 108015
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $9,287.99
$5,175
As low as $168.18/mo
View Details
Jet PBC-410AEH, VFD 4-Button Control Pendant 10' Cord 162410 at Elite Metal Tools
Jet PBC-410AEH, VFD 4-Button Control Pendant 10' Cord 162410
  • 10' Power cord length to match an electric hoist with 10' lift
  • 4-button controller for electric hoist and trolley with 4-pin quick-connect plug
  • Push button controller with cable strain relief system for durability and reliability
  • Compatible with VOLT Series Hoist and Trolley combinations
  • Backed by our industry leading 2-Year Warranty
$99
View Details
MPI 6”x18” 100N Holding Force Rare Earth Surface Grinder Permanent Magnetic Chuck SGC-150450-REN at Elite Metal Tools
MPI 6”x18” 100N Holding Force Rare Earth Surface Grinder Permanent Magnetic Chuck SGC-150450-REN
  • Chuck Dimensions: 6” x 18”
  • Holding Force: 100N/cm² / 145lbs/in²
  • Min Workpiece Size: 0.02” x 0.02” x 0.04”  
  • Regrinding Limit: 7mm / 0.275”
MSRP: $2,339
$1,994
As low as $64.80/mo
View Details
Jet 1-Ton Hand Chain Hoist with 10' Lift & Overload Protection | L-100-100WO-10 102100 at Elite Metal Tools
Jet 1-Ton Hand Chain Hoist with 10' Lift & Overload Protection | L-100-100WO-10 102100
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $580.99
$425
View Details
Jet 2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS200-460-015 144008 at Elite Metal Tools
Jet 2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS200-460-015 144008
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $13,190.99
$7,355
As low as $239.03/mo
View Details
Jet MT050, 1/2 Ton Two Speed Electric Trolley 3-Phase 460V 144183 at Elite Metal Tools
Jet MT050, 1/2 Ton Two Speed Electric Trolley 3-Phase 460V 144183
  • Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
  • TAA Approved
  • Two speeds reduces bump firing to while still allowing high speed movement of materials
  • Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
  • Expanded flange capacity kits are available
MSRP: $3,504.99
$2,029
As low as $65.94/mo
View Details
Jet 1/2-Ton Electric Chain Hoist 1-Phase 10' Lift | 1/2SS-1C-10 121100 at Elite Metal Tools
Jet 1/2-Ton Electric Chain Hoist 1-Phase 10' Lift | 1/2SS-1C-10 121100
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $5,088.99
$2,875
As low as $93.43/mo
View Details
Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS100-460-020 144006 at Elite Metal Tools
Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS100-460-020 144006
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $9,423.99
$5,229
As low as $169.94/mo
View Details
Jet 5-Ton Hand Chain Hoist with 10' Lift | S90-500-10 101950 at Elite Metal Tools
Jet 5-Ton Hand Chain Hoist with 10' Lift | S90-500-10 101950
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $1,191.99
$775
As low as $25.18/mo
View Details
Jet TS200-230-020,2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT200 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 140240K at Elite Metal Tools
Jet TS200-230-020,2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT200 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 140240K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $15,890.99
$8,740
As low as $284.05/mo
View Details
Jet JLP-150A-15, 1-1/2 Ton Lever Hoist with 15' Lift 287402 at Elite Metal Tools
Jet JLP-150A-15, 1-1/2 Ton Lever Hoist with 15' Lift 287402
  • Grade 80 black oxide coated load chain for added durability
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
MSRP: $668.99
$469
View Details
Jet 1/2-Ton Aluminum Hand Chain Hoist with 10ft of lift | AL100-050-10 133051 at Elite Metal Tools
Jet 1/2-Ton Aluminum Hand Chain Hoist with 10ft of lift | AL100-050-10 133051
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $619.99
$455
View Details
Jet 15-Ton Hand Chain Hoist with 15' Lift & Overload Protection | L-100-1500WO-15 109115 at Elite Metal Tools
Jet 15-Ton Hand Chain Hoist with 15' Lift & Overload Protection | L-100-1500WO-15 109115
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $6,254.99
$3,560
As low as $115.70/mo
View Details