By Category

Hoists & Cranes

  • Layout
Jet 1-Ton Hand Chain Hoist with 10' Lift & Overload Protection | L-100-100WO-10 102100 at Elite Metal Tools
Jet 1-Ton Hand Chain Hoist with 10' Lift & Overload Protection | L-100-100WO-10 102100
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $580.99
$425
View Details
Jet 1-Ton Hand Chain Hoist with 10' Lift | S90-100-10 101910 at Elite Metal Tools
Jet 1-Ton Hand Chain Hoist with 10' Lift | S90-100-10 101910
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $351.99
$245
View Details
Jet JLP-150A-15, 1-1/2 Ton Lever Hoist with 15' Lift 287402 at Elite Metal Tools
Jet JLP-150A-15, 1-1/2 Ton Lever Hoist with 15' Lift 287402
  • Grade 80 black oxide coated load chain for added durability
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
MSRP: $668.99
$469
View Details
Jet 1-Ton Aluminum Hand Chain Hoist with 30ft of Lift | AL100-100-30 133130 at Elite Metal Tools
Jet 1-Ton Aluminum Hand Chain Hoist with 30ft of Lift | AL100-100-30 133130
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $1,000.99
$655
As low as $21.28/mo
View Details
MPI 8”x16” 110N Holding Force Electromagnet Transverse Fine Pole Surface Grinding Chuck EMTP-200400-SGC at Elite Metal Tools
MPI 8”x16” 110N Holding Force Electromagnet Transverse Fine Pole Surface Grinding Chuck EMTP-200400-SGC
  • Chuck Size: 8” x 16”
  • Holding force: 110N/cm² / 159lbs/in²
  • Min. Workpiece Size: 25mm x 25mm x 3mm / 1" x 1" x .12"
  • Regrinding limit: 6 mm / .236"
MSRP: $4,728
$4,288
As low as $139.36/mo
View Details
MPI 8”x24” 100N Holding Force Rare Earth Surface Grinder Permanent Magnetic Chuck SGC-200600-REN at Elite Metal Tools
MPI 8”x24” 100N Holding Force Rare Earth Surface Grinder Permanent Magnetic Chuck SGC-200600-REN
  • Chuck Dimensions: 8” x 24”
  • Holding Force: 100N/cm² / 145lbs/in²
  • Min Workpiece Size: 0.02” x 0.02” x 0.04”  
  • Regrinding Limit: 7mm / 0.275”
MSRP: $3,989
$3,417
As low as $111.05/mo
View Details
Jet 2SS-3C-10, 2-Ton Electric Chain Hoist 3-Phase 10' Lift 231000 at Elite Metal Tools
Jet 2SS-3C-10, 2-Ton Electric Chain Hoist 3-Phase 10' Lift 231000
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $6,644.99
$3,815
As low as $123.98/mo
View Details
Jet JLP-600A-20, 6 Ton Lever Hoist with 20' Lift 287603 at Elite Metal Tools
Jet JLP-600A-20, 6 Ton Lever Hoist with 20' Lift 287603
  • Grade 80 black oxide coated load chain for added durability
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
MSRP: $1,752.99
$1,085
As low as $35.26/mo
View Details
Jet 3-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS300-460-015 144011 at Elite Metal Tools
Jet 3-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS300-460-015 144011
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $13,738.99
$7,635
As low as $248.13/mo
View Details
Jet 2-Ton Aluminum Hand Chain Hoist with 20ft of Lift | AL100-200-20 133220 at Elite Metal Tools
Jet 2-Ton Aluminum Hand Chain Hoist with 20ft of Lift | AL100-200-20 133220
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $1,138.99
$759
As low as $24.66/mo
View Details
MPI 6”x14” 100N Holding Force Rare Earth Surface Grinder Permanent Magnetic Chuck SGC-150350-REN at Elite Metal Tools
MPI 6”x14” 100N Holding Force Rare Earth Surface Grinder Permanent Magnetic Chuck SGC-150350-REN
  • Chuck Dimensions: 6” x 14”
  • Holding Force: 100N/cm² / 145lbs/in²
  • Min Workpiece Size: 0.02” x 0.02” x 0.04”  
  • Regrinding Limit: 7mm / 0.275”
MSRP: $2,095
$1,739
As low as $56.51/mo
View Details
Jet 10-Ton Hand Chain Hoist with 10' Lift | S90-1000-10 101960 at Elite Metal Tools
Jet 10-Ton Hand Chain Hoist with 10' Lift | S90-1000-10 101960
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $2,855.99
$1,675
As low as $54.43/mo
View Details
Bison Lifting Equipment 5 Ton Manual 10 FT Lifting Chain Hoist with Premium Galvanized Chain CH50-10-G at Elite Metal Tools
Bison Lifting Equipment 5 Ton Manual 10 FT Lifting Chain Hoist with Premium Galvanized Chain CH50-10-G
  • 5 Ton Lifting Capacity
  • 10 Ft Standard lift
  • Premium Galvanized load Chain
  • Double-Pawl Load Brake
$839.86
As low as $27.29/mo
View Details
MPI 8”x24” 110N Holding Force Electromagnet Transverse Fine Pole Surface Grinding Chuck EMTP-200600-SGC at Elite Metal Tools
MPI 8”x24” 110N Holding Force Electromagnet Transverse Fine Pole Surface Grinding Chuck EMTP-200600-SGC
  • Chuck Size: 8” x 24”
  • Holding force: 110N/cm² / 159lbs/in²
  • Min. Workpiece Size: 25mm x 25mm x 3mm / 1" x 1" x .12"
  • Regrinding limit: 6 mm / .236"
MSRP: $5,682
$5,101
As low as $165.78/mo
View Details
Bison Lifting Equipment 3 Ton Manual 20 FT Lifting Chain Hoist with Premium Galvanized Chain CH30-20-G at Elite Metal Tools
Bison Lifting Equipment 3 Ton Manual 20 FT Lifting Chain Hoist with Premium Galvanized Chain CH30-20-G
  • 3 Ton Lifting Capacity
  • 20 Ft Standard lift
  • Premium Galvanized load Chain
  • Double-Pawl Load Brake
$709.04
As low as $23.04/mo
View Details
Bison Lifting Equipment 10 Ton Manual 20 FT Lifting Chain Hoist with Premium Galvanized Chain CH100-20-G at Elite Metal Tools
Bison Lifting Equipment 10 Ton Manual 20 FT Lifting Chain Hoist with Premium Galvanized Chain CH100-20-G
  • 10 Ton Lifting Capacity
  • 20 Ft Standard lift
  • Premium Galvanized load Chain
  • Double-Pawl Load Brake
$1,960.54
As low as $63.71/mo
View Details
Jet 1-PT, 1-Ton Heavy Duty Manual Trolley 252010 at Elite Metal Tools
Jet 1-PT, 1-Ton Heavy Duty Manual Trolley 252010
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened large steel wheels and thicker double sealed lubricated ball bearings provide smooth movement
  • Welded heavy gauge steel frame and powder coat finish provide maximum durability and protection
MSRP: $288.99
$205
View Details
MPI 6”x18” 100N Holding Force Rare Earth Surface Grinder Permanent Magnetic Chuck SGC-150450-REN at Elite Metal Tools
MPI 6”x18” 100N Holding Force Rare Earth Surface Grinder Permanent Magnetic Chuck SGC-150450-REN
  • Chuck Dimensions: 6” x 18”
  • Holding Force: 100N/cm² / 145lbs/in²
  • Min Workpiece Size: 0.02” x 0.02” x 0.04”  
  • Regrinding Limit: 7mm / 0.275”
MSRP: $2,339
$1,994
As low as $64.80/mo
View Details
Jet 1-Ton Aluminum Hand Chain Hoist with 20ft of Lift | AL100-100-20 133120 at Elite Metal Tools
Jet 1-Ton Aluminum Hand Chain Hoist with 20ft of Lift | AL100-100-20 133120
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $776.99
$535
As low as $17.38/mo
View Details
Jet MT300-4, 3 Ton Two Speed Electric Trolley 3-Phase 460V 144189 at Elite Metal Tools
Jet MT300-4, 3 Ton Two Speed Electric Trolley 3-Phase 460V 144189
  • Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
  • TAA Approved
  • Two speeds reduces bump firing to while still allowing high speed movement of materials
  • Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
  • Expanded flange capacity kits are available
MSRP: $4,753.99
$2,699
As low as $87.71/mo
View Details
Jet 1/8-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS018-020 104002 at Elite Metal Tools
Jet 1/8-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS018-020 104002
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • Hoist carries a dust and moisture rating of IP-55 and the wireless transmitter IP-65 which means hoist can stay in the light rain and pendant is dust and water proof.
MSRP: $6,137.99
$3,485
As low as $113.26/mo
View Details
Jet JG-75A, 3/4 Ton Grip Puller with Cable 286575K at Elite Metal Tools
Jet JG-75A, 3/4 Ton Grip Puller with Cable 286575K
  • Double sealed ratchet brake system increases safety on the jobsite
  • Available in 3/4, 1-1/2 and 3-Ton pulling capacities
  • Designed to lift, lower, stretch, or pull heavy loads
  • Double Sealed Ratchet Brake System
  • Lightweight zinc coated steel is used to resist corrosion
MSRP: $876.99
$575
As low as $18.68/mo
View Details
Jet 1/2-Ton Electric Chain Hoist 3-Phase 20' Lift | 1/2SS-3C-20 123200 at Elite Metal Tools
Jet 1/2-Ton Electric Chain Hoist 3-Phase 20' Lift | 1/2SS-3C-20 123200
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
  • Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling
MSRP: $5,006.99
$2,825
As low as $91.81/mo
View Details
MPI 14” 160N Holding Force Rare Earth Round Permanent Magnetic Chuck MAX-350-REN at Elite Metal Tools
MPI 14” 160N Holding Force Rare Earth Round Permanent Magnetic Chuck MAX-350-REN
  • Chuck Diameter: 14”
  • Holding Force: 160N/cm² / 232lbs/in²
  • Min Workpiece Size: 40mm x 8mm / 1.57” x 0.314”
  • Regrinding Limit: 10mm / 0.393”
MSRP: $5,667
$5,132
As low as $166.79/mo
View Details