By Category

Hoists & Cranes

  • Layout
Jet 3-Ton Hand Chain Hoist with 10' Lift & Overload Protection | L-100-300WO-10 106100 at Elite Metal Tools
Jet 3-Ton Hand Chain Hoist with 10' Lift & Overload Protection | L-100-300WO-10 106100
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $1,290.99
$825
As low as $26.81/mo
View Details
MPI 12”x36” 48 Poles 170N Holding Force ElectroPermanent Mastermill Milling Chuck MM-50-300900-EP at Elite Metal Tools
MPI 12”x36” 48 Poles 170N Holding Force ElectroPermanent Mastermill Milling Chuck MM-50-300900-EP
  • Chuck Size: 12” x 36”
  • Holding force: 170 N/cm² / 246 lbs/cm²
  • Min. Workpiece Size: 50mm x 110mm x 20mm / 2” x 4.3” x 0.787”
  • Regrinding limit: 6mm / .236”
MSRP: $9,345
$8,868
As low as $288.21/mo
View Details
Jet JLP-300A-5SH, 3 Ton Lever Hoist, 5' Lift & Shipyard Hooks 287800 at Elite Metal Tools
Jet JLP-300A-5SH, 3 Ton Lever Hoist, 5' Lift & Shipyard Hooks 287800
  • All steel construction
  • Impact resistant all steel construction for added durability and protection
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
  • NEW! Redesigned ergonomic grip allows for greater operator control and increased comfort
MSRP: $812.99
$545
As low as $17.71/mo
View Details
Jet JLP-300A-10SH, 3 Ton Lever Hoist, 10' Lift & Shipyard Hooks 287801 at Elite Metal Tools
Jet JLP-300A-10SH, 3 Ton Lever Hoist, 10' Lift & Shipyard Hooks 287801
  • All steel construction
  • Impact resistant all steel construction for added durability and protection
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
  • NEW! Redesigned ergonomic grip allows for greater operator control and increased comfort
MSRP: $865.99
$575
As low as $18.68/mo
View Details
Jet JLH-300WO-15 3 Ton Lever Hoist, 15' Lift with Overload Protection 376502 at Elite Metal Tools
Jet JLH-300WO-15 3 Ton Lever Hoist, 15' Lift with Overload Protection 376502
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $1,449.99
$915
As low as $29.73/mo
View Details
MPI 18”x32” 70 Poles 170N Holding Force ElectroPermanent Mastermill Milling Chuck MM-50-480800-EP at Elite Metal Tools
MPI 18”x32” 70 Poles 170N Holding Force ElectroPermanent Mastermill Milling Chuck MM-50-480800-EP
  • Chuck Size: 18” x 32”
  • Holding force: 170 N/cm² / 246 lbs/cm²
  • Min. Workpiece Size: 50mm x 110mm x 20mm / 2” x 4.3” x 0.787”
  • Regrinding limit: 6mm / .236”
MSRP: $14,519
$13,715
As low as $445.73/mo
View Details
MPI 18”x20” 42 Poles 170N Holding Force ElectroPermanent Mastermill Milling Chuck MM-50-480490-EP at Elite Metal Tools
MPI 18”x20” 42 Poles 170N Holding Force ElectroPermanent Mastermill Milling Chuck MM-50-480490-EP
  • Chuck Size: 18” x 20”
  • Holding force: 170 N/cm² / 246 lbs/cm²
  • Min. Workpiece Size: 50mm x 110mm x 20mm / 2” x 4.3” x 0.787”
  • Regrinding limit: 6mm / .236”
MSRP: $9,707
$9,126
As low as $296.59/mo
View Details
MPI 22”x24” 64 Poles 170N Holding Force ElectroPermanent Mastermill Milling Chuck MM-50-580600-EP at Elite Metal Tools
MPI 22”x24” 64 Poles 170N Holding Force ElectroPermanent Mastermill Milling Chuck MM-50-580600-EP
  • Chuck Size: 22” x 24”
  • Holding force: 170 N/cm² / 246 lbs/cm²
  • Min. Workpiece Size: 50mm x 110mm x 20mm / 2” x 4.3” x 0.787”
  • Regrinding limit: 6mm / .236”
MSRP: $13,530
$12,744
As low as $414.18/mo
View Details
Jet JLH-100WO-20 1 Ton Lever Hoist, 20' Lift with Overload Protection 376203 at Elite Metal Tools
Jet JLH-100WO-20 1 Ton Lever Hoist, 20' Lift with Overload Protection 376203
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $821.99
$545
As low as $17.71/mo
View Details
MPI Single Wave 4 Channel ElectroPermanent Chuck Control Unit with U19 Controller EPCU-40SW at Elite Metal Tools
MPI Single Wave 4 Channel ElectroPermanent Chuck Control Unit with U19 Controller EPCU-40SW
  • Main Operating Voltage: 200-460V
  • Main Operating Frequency: 50/60Hz
  • Operating Temperature: 32-122°F
  • Maximum Relative Humidity: 90%
MSRP: $7,827
$7,222
As low as $234.71/mo
View Details
Jet 1/2-Ton Hand Chain Hoist with 20' Lift | S90-050-20 101902 at Elite Metal Tools
Jet 1/2-Ton Hand Chain Hoist with 20' Lift | S90-050-20 101902
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $415.99
$265
View Details
Jet 1-Ton Hand Chain Hoist with 15' Lift & Overload Protection | L-100-100WO-15 203115 at Elite Metal Tools
Jet 1-Ton Hand Chain Hoist with 15' Lift & Overload Protection | L-100-100WO-15 203115
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $675.99
$465
View Details
Jet JLH-25-5, 1/4-Ton Compact Lever Hoist With 5' Lift 181205 at Elite Metal Tools
Jet JLH-25-5, 1/4-Ton Compact Lever Hoist With 5' Lift 181205
  • Alloy Steel Hooks- Industrial rated hooks rotate 360 degrees for easy rigging. Hooks slowly stretch to indicate an overload situation increasing jobsite safety
  • Cast steel safety latches
  • Compact design with smaller body and lightweight design for low headroom applications and use in confined areas
  • Grade 100 Load Chain- Corrosive resistant grade 100 load chain is stronger than grade 80 load chain extending the life of the hoist
  • Heat Treated Load Plates
MSRP: $399.99
$265
View Details
Jet JLP-150A-5, 1-1/2 Ton Lever Hoist with 5' Lift 287400 at Elite Metal Tools
Jet JLP-150A-5, 1-1/2 Ton Lever Hoist with 5' Lift 287400
  • Grade 80 black oxide coated load chain for added durability
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
MSRP: $563.99
$425
View Details
MPI 22”x40” 96 Poles 170N Holding Force ElectroPermanent Mastermill Milling Chuck MM-50-580990-EP at Elite Metal Tools
MPI 22”x40” 96 Poles 170N Holding Force ElectroPermanent Mastermill Milling Chuck MM-50-580990-EP
  • Chuck Size: 22” x 40”
  • Holding force: 170 N/cm² / 246 lbs/cm²
  • Min. Workpiece Size: 50mm x 110mm x 20mm / 2” x 4.3” x 0.787”
  • Regrinding limit: 6mm / .236”
MSRP: $18,343
$17,242
As low as $341.21/mo
View Details
Jet 1-Ton Hand Chain Hoist with 30' Lift & Overload Protection | L-100-100WO-30 203130 at Elite Metal Tools
Jet 1-Ton Hand Chain Hoist with 30' Lift & Overload Protection | L-100-100WO-30 203130
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $917.99
$595
As low as $19.33/mo
View Details
MPI 22”x36” 96 Poles 170N Holding Force ElectroPermanent Mastermill Milling Chuck MM-50-580900-EP at Elite Metal Tools
MPI 22”x36” 96 Poles 170N Holding Force ElectroPermanent Mastermill Milling Chuck MM-50-580900-EP
  • Chuck Size: 22” x 36”
  • Holding force: 170 N/cm² / 246 lbs/cm²
  • Min. Workpiece Size: 50mm x 110mm x 20mm / 2” x 4.3” x 0.787”
  • Regrinding limit: 6mm / .236”
MSRP: $17,368
$16,356
As low as $323.68/mo
View Details
MPI 12”x20” 24 Poles 170N Holding Force ElectroPermanent Mastermill Milling Chuck MM-50-300490-EP at Elite Metal Tools
MPI 12”x20” 24 Poles 170N Holding Force ElectroPermanent Mastermill Milling Chuck MM-50-300490-EP
  • Chuck Size: 12” x 20”
  • Holding force: 170 N/cm² / 246 lbs/cm²
  • Min. Workpiece Size: 50mm x 110mm x 20mm / 2” x 4.3” x 0.787”
  • Regrinding limit: 6mm / .236”
MSRP: $7,033
$6,664
As low as $216.58/mo
View Details
Jet 1/2-Ton Aluminum Hand Chain Hoist with 30ft of Lift | AL100-050-30 133054 at Elite Metal Tools
Jet 1/2-Ton Aluminum Hand Chain Hoist with 30ft of Lift | AL100-050-30 133054
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $845.99
$569
As low as $18.49/mo
View Details
Jet JLH-600WO-15 6 Ton Lever Hoist, 15' Lift with Overload Protection 376602 at Elite Metal Tools
Jet JLH-600WO-15 6 Ton Lever Hoist, 15' Lift with Overload Protection 376602
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $2,469.99
$1,459
As low as $47.41/mo
View Details
Jet 1/2-Ton Aluminum Hand Chain Hoist with 15ft of Lift | AL100-050-15 133052 at Elite Metal Tools
Jet 1/2-Ton Aluminum Hand Chain Hoist with 15ft of Lift | AL100-050-15 133052
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $681.99
$485
View Details
Jet 1/4-Ton Hand Chain Hoist with 10' Lift & Overload Protection | L-100-250WO-10 101200 at Elite Metal Tools
Jet 1/4-Ton Hand Chain Hoist with 10' Lift & Overload Protection | L-100-250WO-10 101200
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $504.99
$315
View Details
MPI 16”x36” 72 Poles 170N Holding Force ElectroPermanent Mastermill Milling Chuck MM-50-420900-EP at Elite Metal Tools
MPI 16”x36” 72 Poles 170N Holding Force ElectroPermanent Mastermill Milling Chuck MM-50-420900-EP
  • Chuck Size: 16” x 36”
  • Holding force: 170 N/cm² / 246 lbs/cm²
  • Min. Workpiece Size: 50mm x 110mm x 20mm / 2” x 4.3” x 0.787”
  • Regrinding limit: 6mm / .236”
MSRP: $15,575
$14,675
As low as $476.93/mo
View Details
MPI Full Wave 1 Channel ElectroPermanent Chuck Control Unit with U19 Controller EPCU-10DW at Elite Metal Tools
MPI Full Wave 1 Channel ElectroPermanent Chuck Control Unit with U19 Controller EPCU-10DW
  • Main Operating Voltage: 200-460V
  • Main Operating Frequency: 50/60Hz
  • Operating Temperature: 32-122°F
  • Maximum Relative Humidity: 90%
MSRP: $4,047
$3,747
As low as $121.77/mo
View Details