By Category

Hoists & Cranes

MPI Full Wave 2 Channel ElectroPermanent Chuck Control Unit with U19 Controller EPCU-20DW

Main Operating Voltage: 200-460V
Main Operating Frequency: 50/60Hz
Operating Temperature: 32-122°F
Maximum Relative Humidity: 90%

MSRP: ~~$5,367~~

$4,945

As low as $160.71/mo

View Details

Jet 1/2-Ton Electric Chain Hoist 1-Phase 20' Lift | 1/2SS-1C-20 121200

24 volt push button controller with cable strain relief system for durability and reliability
All steel construction
NEMA 4X compliant push button control pendants
Durable powder coat finish
Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability

MSRP: ~~$5,390.99~~

$3,115

As low as $101.23/mo

View Details

Jet TS050-230-015,1/2-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT050 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 140234K

The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
Two Speed Motor ensures the correct speed for the job with a click of a button
IP55 TEFC Motor with Class F insulation for working in harsh environments

MSRP: ~~$10,746.99~~

$5,910

As low as $192.07/mo

View Details

Jet TS300-230-015,3-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT300 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 140117K

The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
Two Speed Motor ensures the correct speed for the job with a click of a button
IP55 TEFC Motor with Class F insulation for working in harsh environments
5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads

MSRP: ~~$16,809.99~~

$9,349

As low as $303.84/mo

View Details

Jet JLP-150A-5SH, 1-1/2 Ton Lever Hoist, 5' Lift & Shipyard Hooks 287700

All steel construction
Impact resistant all steel construction for added durability and protection
Needle bearings support the load sheave to increase efficiency and promote smooth operation
JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
NEW! Redesigned ergonomic grip allows for greater operator control and increased comfort

MSRP: ~~$578.99~~

$425

View Details

Jet JLH Series 3/4 Ton Lever Hoist, 20' Lift with Overload Protection 376103

All steel construction
Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
Enhanced ergonomic grip allows for greater operator control and increased comfort
Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
Heat Treated Load Plates

MSRP: ~~$789.99~~

$535

As low as $17.38/mo

View Details

Jet 1-1/2-Ton Hand Chain Hoist with 30' Lift | S90-150-30 101923

Grade 80 black oxide coated load chain for added durability
Heat Treated Load Plates
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
Needle bearings support the load sheave to increase efficiency and promote smooth operation

MSRP: ~~$811.99~~

$545

As low as $17.71/mo

View Details

Jet 20-Ton Hand Chain Hoist with 20' Lift & Overload Protection | L-100-2000WO-20 102000

Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
Heat Treated Load Plates
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist

MSRP: ~~$11,370.99~~

$6,445

As low as $209.46/mo

View Details

MPI 6”x16” 100N Holding Force Rare Earth Surface Grinder Permanent Magnetic Chuck SGC-150400-REN

Chuck Dimensions: 6” x 16”
Holding Force: 100N/cm² / 145lbs/in²
Min Workpiece Size: 0.02” x 0.02” x 0.04”
Regrinding Limit: 7mm / 0.275”

MSRP: ~~$2,248~~

$1,922

As low as $62.46/mo

View Details

Jet JLH-50-15, 1/2-Ton Compact Lever Hoist With 15' Lift 181515

Alloy Steel Hooks- Industrial rated hooks rotate 360 degrees for easy rigging. Hooks slowly stretch to indicate an overload situation increasing jobsite safety
Cast steel safety latches
Compact design with smaller body and lightweight design for low headroom applications and use in confined areas
Grade 100 Load Chain- Corrosive resistant grade 100 load chain is stronger than grade 80 load chain extending the life of the hoist
Heat Treated Load Plates

MSRP: ~~$531.99~~

$325

View Details

Jet JLP-075A-20, 3/4 Ton Lever Hoist with 20' Lift 287303

Grade 80 black oxide coated load chain for added durability
Impact resistant all steel construction for added durability and protection
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
NEW! Redesigned ergonomic grip allows for greater operator control and increased comfort

MSRP: ~~$547.99~~

$415

View Details

Jet 1/4-Ton Electric Chain Hoist 1-Phase 20' Lift | JSH-550-20 110520

Aluminum Housing- Aluminum alloy housing decreases the weight for convenient transportation
Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
Heat Treated Gears- Heat treated alloy steel geared drive train for long lasting durability
JET VOLT and SSC Series Electric Hoists and JET ET Series Electric Trolleys are not rated or designed for outdoor use or wet environments
Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling

MSRP: ~~$4,066.99~~

$2,315

As low as $75.23/mo

View Details

Jet JLP-300A-5, 3 Ton Lever Hoist with 5' Lift 287500

Grade 80 black oxide coated load chain for added durability
Impact resistant all steel construction for added durability and protection
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
Needle bearings support the load sheave to increase efficiency and promote smooth operation
JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load

MSRP: ~~$789.99~~

$525

As low as $17.06/mo

View Details

Jet 5-Ton Hand Chain Hoist with 10' Lift & Overload Protection | L-100-500WO-10 107100

Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
Heat Treated Load Plates
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist

MSRP: ~~$1,691.99~~

$1,039

As low as $33.76/mo

View Details

Jet 1-Ton Electric Chain Hoist 3-Phase 10' Lift | 1SS-3C-10 131000

All steel construction
NEMA 4X compliant push button control pendants
Durable powder coat finish
Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling

MSRP: ~~$5,559.99~~

$3,189

As low as $103.64/mo

View Details

Jet MT050, 1/2 Ton Two Speed Electric Trolley 3-Phase 230V 140183

Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
Two speeds reduces bump firing to while still allowing high speed movement of materials
Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
Expanded flange capacity kits are available
TAA approved

MSRP: ~~$3,572.99~~

$2,065

As low as $67.11/mo

View Details

MPI Single Wave 1 Channel ElectroPermanent Chuck Control Unit with U19 Controller EPCU-10SW

Main Operating Voltage: 200-460V
Main Operating Frequency: 50/60Hz
Operating Temperature: 32-122°F
Maximum Relative Humidity: 90%

MSRP: ~~$2,854~~

$2,659

As low as $86.41/mo

View Details

Jet JLH Series 3/4 Ton Lever Hoist, 10' Lift with Overload Protection 376101

All steel construction
Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
Enhanced ergonomic grip allows for greater operator control and increased comfort
Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
Heat Treated Load Plates

MSRP: ~~$687.99~~

$475

View Details

Jet 1/4-Ton Hand Chain Hoist with 20' Lift & Overload Protection | L-100-250WO-20 101250

Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
Heat Treated Load Plates
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist

MSRP: ~~$622.99~~

$449

View Details

Jet JLP-075A-10, 3/4 Ton Lever Hoist, 10' Lift 287301

Grade 80 black oxide coated load chain for added durability
Impact resistant all steel construction for added durability and protection
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
Needle bearings support the load sheave to increase efficiency and promote smooth operation
JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load

MSRP: ~~$493.99~~

$315

View Details

Jet 3-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS300-460-010 144010

The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
Two Speed Motor ensures the correct speed for the job with a click of a button
IP55 TEFC Motor with Class F insulation for working in harsh environments

MSRP: ~~$13,146.99~~

$7,335

As low as $238.38/mo

View Details

Jet JLH-25-10, 1/4-Ton Compact Lever Hoist With 10' Lift 181210

Alloy Steel Hooks- Industrial rated hooks rotate 360 degrees for easy rigging. Hooks slowly stretch to indicate an overload situation increasing jobsite safety
Cast steel safety latches
Compact design with smaller body and lightweight design for low headroom applications and use in confined areas
Grade 100 Load Chain- Corrosive resistant grade 100 load chain is stronger than grade 80 load chain extending the life of the hoist
Heat Treated Load Plates

MSRP: ~~$442.99~~

$285

View Details

Jet TS050-230-010,1/2-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT050 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 140233K

The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
Two Speed Motor ensures the correct speed for the job with a click of a button
IP55 TEFC Motor with Class F insulation for working in harsh environments

MSRP: ~~$10,572.99~~

$5,820

As low as $189.15/mo

View Details

Jet JLH-150WO-10, 1-1/2 Ton, Lever Hoist with 10' Lift with Overload Protection 376301

All steel construction
Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
Enhanced ergonomic grip allows for greater operator control and increased comfort
Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
Heat Treated Load Plates

MSRP: ~~$871.99~~

$575

As low as $18.68/mo

View Details