By Category

Hoists & Cranes

  • Layout
Jet 15-Ton Hand Chain Hoist with 10' Lift & Overload Protection | L-100-1500WO-10 109110 at Elite Metal Tools
Jet 15-Ton Hand Chain Hoist with 10' Lift & Overload Protection | L-100-1500WO-10 109110
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
$5,256.00
$3,354.78
As low as $109/mo
View Details
Jet 1-PT, 1-Ton Heavy Duty Manual Trolley 252010 at Elite Metal Tools
Jet 1-PT, 1-Ton Heavy Duty Manual Trolley 252010
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened large steel wheels and thicker double sealed lubricated ball bearings provide smooth movement
  • Welded heavy gauge steel frame and powder coat finish provide maximum durability and protection
$270.00
$186.00
View Details
Bison Lifting Equipment 1 Ton Three Phase Dual Speed Electric Lifting Chain Hoist HHBDSK01-01D at Elite Metal Tools
Bison Lifting Equipment 1 Ton Three Phase Dual Speed Electric Lifting Chain Hoist HHBDSK01-01D
  • 1 Ton Lifting Capacity
  • 20 Ft Standard lift
  • H4 Classification
  • Dual Lifting Speed
$4,241.25
$3,817.00
As low as $124/mo
View Details
Jet 5-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS500-460-020 144015 at Elite Metal Tools
Jet 5-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS500-460-020 144015
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
$17,107.00
$10,730.99
As low as $348/mo
View Details
MPI 3300lbs Flat Capacity 1650lbs Round Capacity Permanent Lifting Magnet LM-1500-REN at Elite Metal Tools
MPI 3300lbs Flat Capacity 1650lbs Round Capacity Permanent Lifting Magnet LM-1500-REN
  • Workload Limit Flat Material: 3,300 lbs
  • Workload Limit Round Material: 1,650 lbs
  • Temperature Max: 80°C / 176°F
  • Diameter of Eye: .08”
$3,645.00
$2,932.00
As low as $95/mo
View Details
Jet 2-Ton Hand Chain Hoist with 10' Lift & Overload Protection | L-100-200WO-10 105100 at Elite Metal Tools
Jet 2-Ton Hand Chain Hoist with 10' Lift & Overload Protection | L-100-200WO-10 105100
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
$861.00
$550.99
As low as $17/mo
View Details
Jet JLP-075A-10, 3/4 Ton Lever Hoist, 10' Lift 287301 at Elite Metal Tools
Jet JLP-075A-10, 3/4 Ton Lever Hoist, 10' Lift 287301
  • Grade 80 black oxide coated load chain for added durability
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
$466.00
$304.98
View Details
Jet 1/4-Ton Hand Chain Hoist with 20' Lift & Overload Protection | L-100-250WO-20 101250 at Elite Metal Tools
Jet 1/4-Ton Hand Chain Hoist with 20' Lift & Overload Protection | L-100-250WO-20 101250
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
$597.00
$418.00
View Details
Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS100-460-010 144004 at Elite Metal Tools
Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS100-460-010 144004
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
$8,080.00
$5,068.00
As low as $164/mo
View Details
MPI 22”x40” 96 Poles 170N Holding Force ElectroPermanent Mastermill Milling Chuck MM-50-580990-EP at Elite Metal Tools
MPI 22”x40” 96 Poles 170N Holding Force ElectroPermanent Mastermill Milling Chuck MM-50-580990-EP
  • Chuck Size: 22” x 40”
  • Holding force: 170 N/cm² / 246 lbs/cm²
  • Min. Workpiece Size: 50mm x 110mm x 20mm / 2” x 4.3” x 0.787”
  • Regrinding limit: 6mm / .236”
$16,290.00
$15,312.00
As low as $303/mo
View Details
Jet TS300-460-020,3-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT300-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 144012K at Elite Metal Tools
Jet TS300-460-020,3-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT300-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 144012K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
$15,180.00
$9,521.00
As low as $309/mo
View Details
Jet 1/8-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS018-020 104002 at Elite Metal Tools
Jet 1/8-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS018-020 104002
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • Hoist carries a dust and moisture rating of IP-55 and the wireless transmitter IP-65 which means hoist can stay in the light rain and pendant is dust and water proof.
$5,656.00
$3,547.43
As low as $115/mo
View Details
Jet 1/2-Ton Electric Chain Hoist 1-Phase 20' Lift | 1/2SS-1C-20 121200 at Elite Metal Tools
Jet 1/2-Ton Electric Chain Hoist 1-Phase 20' Lift | 1/2SS-1C-20 121200
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
$4,610.00
$2,942.00
As low as $95/mo
View Details
Jet 2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS200-230-020 140240 at Elite Metal Tools
Jet 2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS200-230-020 140240
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
$11,716.00
$7,348.00
As low as $238/mo
View Details
Jet 3-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS300-460-010 144010 at Elite Metal Tools
Jet 3-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS300-460-010 144010
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
$12,182.00
$7,371.00
As low as $239/mo
View Details
Jet JLH-250WO-10 2-1/2 Ton Lever Hoist, 10' Lift with Overload Protection 376401 at Elite Metal Tools
Jet JLH-250WO-10 2-1/2 Ton Lever Hoist, 10' Lift with Overload Protection 376401
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
$1,130.00
$739.50
As low as $24/mo
View Details
Jet 10-Ton Hand Chain Hoist with 10' Lift & Overload Protection | L-100 1000WO-10 108100 at Elite Metal Tools
Jet 10-Ton Hand Chain Hoist with 10' Lift & Overload Protection | L-100 1000WO-10 108100
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
$4,322.00
$2,756.99
As low as $89/mo
View Details
MPI 12”x24” 110N Holding Force Electromagnet Transverse Fine Pole Surface Grinding Chuck EMTP-300600-SGC at Elite Metal Tools
MPI 12”x24” 110N Holding Force Electromagnet Transverse Fine Pole Surface Grinding Chuck EMTP-300600-SGC
  • Chuck Size: 12” x 24”
  • Holding force: 110N/cm² / 159lbs/in²
  • Min. Workpiece Size: 25mm x 25mm x 3mm / 1" x 1" x .12"
  • Regrinding limit: 6 mm / .236"
$6,920.00
$6,229.00
As low as $202/mo
View Details
Magswitch CE2100 Cordless Electric 2100 Pound Breakaway Force Magnetic Lifter 8140978 at Elite Metal Tools
Magswitch CE2100 Cordless Electric 2100 Pound Breakaway Force Magnetic Lifter 8140978
  • Maximum Breakaway Force: 6,300 lb / 2,850 kg
  • Breakaway Force (@ SWL 3:1): 2,100 lb / 950 kg
  • Number of Cycles per Charge: 400
  • Hold Surface (LxW): 12.6” x 5.1”
$4,499.00
As low as $146/mo
View Details
Jet 5-Ton Hand Chain Hoist with 20' Lift & Overload Protection | L-100-500WO-20 208120 at Elite Metal Tools
Jet 5-Ton Hand Chain Hoist with 20' Lift & Overload Protection | L-100-500WO-20 208120
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
$2,048.00
$1,310.99
As low as $42/mo
View Details
MPI 8”x20” 110N Holding Force Electromagnet Transverse Fine Pole Surface Grinding Chuck EMTP-200500-SGC at Elite Metal Tools
MPI 8”x20” 110N Holding Force Electromagnet Transverse Fine Pole Surface Grinding Chuck EMTP-200500-SGC
  • Chuck Size: 8” x 20”
  • Holding force: 110N/cm² / 159lbs/in²
  • Min. Workpiece Size: 25mm x 25mm x 3mm / 1" x 1" x .12"
  • Regrinding limit: 6 mm / .236"
$4,715.00
$4,258.00
As low as $138/mo
View Details
Jet TS050-230-010,1/2-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT050 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 140233K at Elite Metal Tools
Jet TS050-230-010,1/2-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT050 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 140233K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
$9,612.00
$6,028.00
As low as $195/mo
View Details
Jet TS200-460-020,2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT200-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 144009K at Elite Metal Tools
Jet TS200-460-020,2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT200-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 144009K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
$14,446.00
$9,060.00
As low as $294/mo
View Details
MPI 8”x16” 160N Holding Force Rare Earth Compact Milling Permanent Magnetic Chuck CMC-200400-REN at Elite Metal Tools
MPI 8”x16” 160N Holding Force Rare Earth Compact Milling Permanent Magnetic Chuck CMC-200400-REN
  • Chuck Dimensions: 8” x 16”
  • Holding Force: 160N/cm² / 232lbs/in²
  • Min Workpiece Size: 0.984” x 0.984” x 0.236”
  • Regrinding Limit: 10mm / 0.393”
$2,415.00
$2,349.00
As low as $76/mo
View Details