Heating & Cooling

  • Effective Volume: 8,369 cu.ft
  • Typical Extraction: 57 ppd
  • Airflow: 360 CFM
  • Power Supply: 880W, 60 Hz, 110V Single Phase
$1,815
As low as $58.98/mo
  • Motor: 440V Three Phase
  • Max Width: 72”
  • TDFC Width: 44”-56”-68”
  • Slip and Drive Width: 48”-60”-72”
$162,295
As low as $3,211.81/mo
  • High Fire Rate (BTU/HR): 60,000
  • Low Fire Rate (BTU/HR): 45,000
  • Heat Exchanger Length: 20 ft
  • Electric Supply: 120 V AC, 60 HZ, 1 Amp: 36” cord, grounded 3 prong plug
MSRP: $2,793
$2,234
As low as $72.60/mo
  • Effective Volume: 52,970 cu.ft
  • Typical Extraction: 285 ppd
  • Airflow: 1,750 CFM
  • Power Supply: 3680W, 60 Hz, 440V Three Phase
MSRP: $10,432
$9,595
As low as $311.83/mo
  • 12” Flange/Collar
  • Used on models: KPAC1411-2, KPAC1811-3, KIB1411-2, & KIB1811-2
  • Required when ceiling kit is not used
  • 14” Flange/Collar
  • Used on models: KPAC2421-2 KIB2411-2 KIB2421-2 & KIB3021-2
  • Required when ceiling kit is not used
  • 16” Flange/Collar
  • Used on model: KIB4221-2
  • Required when ceiling kit is not used
  • 18” Flange/Collar
  • Used on models: KIB6021-2 KIB6023-2 & KIB6043-2
  • Required when ceiling kit is not used
  • 20” Flange/Collar
  • Used on models: KIB12023-3 & KIB12043-2
  • Required when ceiling kit is not used
MSRP: $1,237
$791.68
As low as $25.72/mo
MSRP: $35,565
$22,761.60
As low as $450.45/mo
  • Effective Volume: 8,369 cu.ft
  • Typical Extraction: 70 ppd
  • Airflow: 330 CFM
  • Power Supply: 680W, 60 Hz, 115V Single Phase
$1,875
As low as $60.93/mo
  • Motor: 220V Three Phase
  • Air Requirements: PSI 120 CFM 3
  • Process 48” – 72” coil widths
  • ½” -2” liner, TDC Slip and Drive and Raw edge
MSRP: $149,500
$145,495
As low as $2,879.34/mo
  • Diffusion filter disperses exhausted air
  • Disperses exhausted air
  • Filter guards install and remove easily without tools for quick access to filters
  • Four eye bolts allow suspension from shop ceiling
  • Indicator lights up after 200 hours to remind user to replace filters
MSRP: $909.09
$815
As low as $26.48/mo
  • Effective Volume: 10,594 cu.ft
  • Typical Extraction: 97 ppd
  • Airflow: 700 CFM
  • Power Supply: 1090W, 60 Hz, 110V Single Phase
MSRP: $3,382
$3,225
As low as $104.81/mo
  • 60,000 btu/h cooling capacity
  • 41,600 btu/h heating capacity
  • Runs on 460V 20-amp 3PH circuit
  • Variable frequency drive airflow control
MSRP: $22,995
$17,246.25
As low as $341.30/mo
  • High Fire Rate (BTU/HR): 205,000
  • Low Fire Rate (BTU/HR): 160,000
  • Heat Exchanger Length: 60 ft
  • Electric Supply: 120 V AC, 60 HZ, 1 Amp: 36” cord, grounded 3 prong plug
MSRP: $4,679
$3,742
As low as $121.61/mo
  • High Fire Rate (BTU/HR): 175,000
  • Heat Exchanger Length: 60 ft
  • Electric Supply: 120 V AC, 60 HZ, 1 Amp: 36” cord, grounded 3 prong plug
  • Flue and Outside Air Connection: 4” O.D. connection for flue adapter provided at the heater
MSRP: $4,509
$3,607
As low as $117.22/mo
  • Effective Volume: 52,970 cu.ft
  • Typical Extraction: 285 ppd
  • Airflow: 1,750 CFM
  • Power Supply: 3680W, 60 Hz, 440V Three Phase
MSRP: $11,491
$10,595
As low as $344.33/mo
  • Effective Volume: 10,594 cu.ft
  • Typical Extraction: 97 ppd
  • Airflow: 700 CFM
  • Power Supply: 1090W, 60 Hz, 110V Single Phase
MSRP: $3,061
$2,955
As low as $96.03/mo
  • Motor: 5HP 480V Three Phase
  • Speed: 60 FPM
  • Passline Height: 34”
  • Gauge Capacity w/additional tooling: 16-28
$12,795
As low as $415.83/mo
  • Speeds: 2
  • CFM High: 9675
  • RPM High: 395
  • Amp High: 6.3 A
MSRP: $1,461
$935.04
As low as $30.38/mo
  • High Fire Rate (BTU/HR): 80,000
  • Low Fire Rate (BTU/HR): 60,000
  • Heat Exchanger Length: 40 ft
  • Electric Supply: 120 V AC, 60 HZ, 1 Amp: 36” cord, grounded 3 prong plug
MSRP: $3,684
$2,947
As low as $95.77/mo
  • Length: 17 ft
  • Fire Rate (BTU/HR): 100,000
  • CSA Approval: Outdoor Only
  • Gas: Natural Gas and Propane Gas
MSRP: $5,291
$4,232
As low as $137.54/mo