Searching thousands of products...

  • Layout
Tin Knocker 24 Ga. Collar Maker TK NO 24 at Elite Metal Tools
Tin Knocker 24 Ga. Collar Maker TK NO 24
  • Capacity: 24-30 Gauge 
  • Speed:  30ft./minute
  • Uses either 3″ or 6″ width blanks 
  • Works with collars 3″ to 14″ in diameter out of 24 to 30 gauge galvanized
$5,850
As low as $190.12/mo
View Details
Bartell Global SG10 Walk Behind Green Concrete Saw SG10K at Elite Metal Tools
Bartell Global SG10 Walk Behind Green Concrete Saw SG10K
  • Blade Size: 10”
  • Blade Speed: 6000 rpm
  • Cutting Depth: 3.25”
  • Engine: Kohler 7hp
MSRP: $3,100
$2,790
As low as $90.67/mo
View Details
Bartell Global 18" Walk Behind Saw with Water Kit BSS18H39W at Elite Metal Tools
Bartell Global 18" Walk Behind Saw with Water Kit BSS18H39W
  • Max. Blade Diameter: 18”
  • Max. Blade Shaft Speed: 2600 rpm
  • Max. Cutting Depth (18” [457mm] Blade): 6 5/8”
  • Engine: Honda GX390
MSRP: $4,510
$4,059
As low as $131.91/mo
View Details
IMER Combicut 200VA 8” Tile Saw with 1.75 HP 110V Motor 1188084 at Elite Metal Tools
IMER Combicut 200VA 8” Tile Saw with 1.75 HP 110V Motor 1188084
  • Blade diameter: 8"
  • Motor rating: 1.75 h.p. 110v, 15 amp
  • Blade speed: 2.800 r.p.m.
  • Max. cutting depth: 2 ¾"
MSRP: $1,699
$1,599
As low as $51.96/mo
View Details
IMER Combicut 350 iPower 14” Stone and Paver Saw 4 HP 220V Motor 1188931 at Elite Metal Tools
IMER Combicut 350 iPower 14” Stone and Paver Saw 4 HP 220V Motor 1188931
  • Blade diameter 14"
  • Max. cutting length - includes the plunge 48"
  • Motor speed 2,800
  • Cutting table dimensions 55" x 27.5"
MSRP: $3,999
$3,799
As low as $123.46/mo
View Details
IMER USA Masonry 750 Plus 7.5HP 220V Three Phase Masonry Saw 1188864 at Elite Metal Tools
IMER USA Masonry 750 Plus 7.5HP 220V Three Phase Masonry Saw 1188864
  • Blade Diameter: 30”
  • Blade Shaft Diameter: 1”
  • Max. Cutting Length – Includes the Plunge: 18 / 27”
  • Blade Speed: 1700 rpm
MSRP: $7,949
$6,799
As low as $220.96/mo
View Details
IMER Masonry 350 Smart 14” Brick/Block Saw with 2 HP 110V Single Phase Motor 1188975 at Elite Metal Tools
IMER Masonry 350 Smart 14” Brick/Block Saw with 2 HP 110V Single Phase Motor 1188975
  • Blade diameter: 14"
  • Max. cutting length (w/plunge cut): 26" (30")
  • Cutting table dimensions: 20” x 16”
  • Motor speed: 2,850 r.p.m.
MSRP: $2,999
$2,799
As low as $90.96/mo
View Details
IMER Masonry 750 Plus 20-30” Block and Brick Precast Saw 7.5 HP 220V Single Phase 1188863 at Elite Metal Tools
IMER Masonry 750 Plus 20-30” Block and Brick Precast Saw 7.5 HP 220V Single Phase 1188863
  • Blade diameter / Blade shaft diameter: 30” / 1”
  • Max cutting length (w/plunge): 12"
  • Blade speed: 1700 r.p.m.
  • Water pan capacity: 9 gal.
MSRP: $7,949
$6,799
As low as $220.96/mo
View Details
IMER Combicut 250VA 10” Tile & Stone Saw 1.75 HP 110V Motor with 31" Cut 1188164 at Elite Metal Tools
IMER Combicut 250VA 10” Tile & Stone Saw 1.75 HP 110V Motor with 31" Cut 1188164
  • Blade diameter  10"
  • Blade shaft diameter  5/8"
  • Blade speed  2.800 r.p.m
  • Max. cutting depth  3 ¾" 
MSRP: $1,999
$1,899
As low as $61.71/mo
View Details
IMER Combicut 250VA/1000 10” Tile & Stone Saw 1.75 HP 110V Motor with 40" Cut 1188174 at Elite Metal Tools
IMER Combicut 250VA/1000 10” Tile & Stone Saw 1.75 HP 110V Motor with 40" Cut 1188174
  • Blade diameter 10"
  • Blade speed 2.800 r.p.m.
  • Max. cutting length (w/plunge cut) 37" (40")
  • Water pump flow 3 g.p.m.

 

MSRP: $2,699
$2,499
As low as $81.21/mo
View Details
IMER Combicut 250VA / 1500 10" Tile & Stone Saw 1.75 HP 110V Motor with 60" Cut 1188180 at Elite Metal Tools
IMER Combicut 250VA / 1500 10" Tile & Stone Saw 1.75 HP 110V Motor with 60" Cut 1188180
  • Blade diameter 10"
  • Blade shaft diameter 5/8"
  • Max. cutting length (w/plunge cut) 57" (60")
  • Max. cutting depth 3 ¾"
MSRP: $2,999
$2,799
As low as $90.96/mo
View Details
Knudson by Scottsdale Structural Framemaker Stud and Track Roll Forming Machine KFS 1420G1 at Elite Metal Tools
Knudson by Scottsdale Structural Framemaker Stud and Track Roll Forming Machine KFS 1420G1
  • Stud/Track Web Sizes: 3 5/8 to 12-in. deep, Ga. 14 to Ga. 20 thick
  • 5-station expandable manifold, printer mounting head, sheat/cut-off, 6,500-lb decoiler
  • Flange dimpling tooling, 1.5x3.0-in. web service slot tooling
  • Over 20 additional options, including control software, discounted Strucsoft MWF license, and much more.
$315,219
As low as $6,238.18/mo
View Details
Knudson by Scottsdale Structural Framemaker Stud and Track Roll Forming Machine KFS 1622G1 at Elite Metal Tools
Knudson by Scottsdale Structural Framemaker Stud and Track Roll Forming Machine KFS 1622G1
  • Stud/Track Web Sizes: 3.5 to 8-in. deep, Ga. 16 to Ga. 22 thick
  • 5-station expandable manifold, printer mounting head, sheat/cut-off
  • Flange dimpling tooling, 1.5x3.0-in. web service slot tooling
  • Over 20 additional options, including control software, discounted Strucsoft MWF license, and much more.
$283,449
As low as $5,609.45/mo
View Details
Knudson by Scottsdale Non-structural Framemaker Stud and Track Roll Forming Machine KFD 2025G1 at Elite Metal Tools
Knudson by Scottsdale Non-structural Framemaker Stud and Track Roll Forming Machine KFD 2025G1
  • Stud/Track Web Sizes: 1 5/8 to 6-in. deep, Ga. 20 to Ga. 25 thick
  • 5-station expandable manifold, printer mounting head, sheat/cut-off
  • 0.75x1.75-in. and 1.5x3.0-in. web service slot toolings
  • Over 20 additional options, including control software, discounted Strucsoft MWF license, and much more.
$255,019
As low as $5,046.82/mo
View Details