Searching thousands of products...

• Constructed of metal for years of use
• Helps to extended the service life of the air conditioning equipment in the shop
• Filters dust, smoke and oil mist in a closed or air conditioned workshop
• Fully enclosed ball bearing motor with overload protection for long, dependable service
• Metalworking-specific outer filter that attracts more oil mist, smoke and dust generated during the metal processing, which could effect the health of the machinist, especially in closed areas of the workshop

• 11" Blade
• Miter both ways, Stop Mechanism
• 23/4" Capacity
• Self centering vice

• 14" Blade
• Miters 45º Left & Right with self centering vice
• 220V, 3PH
• 4.33" Round Tube Capacity at 90º

• Cuts Non-ferrous metals - Blade turns at 3200 rpm
• 41/4" Capacity
• Miters left and right
• 220V, 3PH

• 10" Blade
• Manual Feed
• Mieters up to 45º left and right
• 110V, 1PH

• 14" Blade
• Variable speed, inverter driven with digital readout for rpm
• Miters 45º Left & Right
• 4.7" Round Tube Capacity at 90º

• 220V 1-phase manual cold saw
• 12.5" blade
• 3.5" round tube capacity
• 45° Mitering Capability

• Blade drive reduction gearbox operates in an oil bath for increased durability
• Cast iron frame
• Flood coolant system
• Flood coolant system with a 1-1/3 Gallon coolant reservoir and pump with flow control system extends blade life
• Fully adjustable material depth stop for sawing repeatability and increased production

• Blade drive reduction gearbox operates in an oil bath for increased durability
• Cast iron frame
• Flood coolant system
• Flood coolant system with a 1-1/3 Gallon coolant reservoir and pump with flow control system extends blade life
• Fully adjustable material depth stop for sawing repeatability and increased production

• 315mm (12") Ferrous Cold Saw for steel, stainless and tough to cut alloys
• Blade drive reduction gearbox operates in an oil bath for increased durability
• Flood coolant system with a 1-1/3 Gallon coolant reservoir and pump with flow control system extends blade life
• Fully adjustable material depth stop for sawing repeatability and increased production
• Hardened and ground direct drive worm shaft and bronze worm wheel transmits maximum torque to the saw blade

• 275mm (10") Ferrous Cold Saw for steel, stainless and tough to cut alloys
• Blade drive reduction gearbox operates in an oil bath for increased durability
• Flood coolant system with a 1-1/3 Gallon coolant reservoir and pump with flow control system extends blade life
• Fully adjustable material depth stop for sawing repeatability and increased production
• Hardened and ground direct drive worm shaft and bronze worm wheel transmits maximum torque to the saw blade

• Pneumatic centering vise w/ Stock stop mechanism
• 41/4" Capacity
• 220V, 3PH
• 14" Blade

• 11" Blade
• Manual Feed
• Miters up to 45º Left & Right
• 110V, 1PH

• 41/4" Capacity
• Pneumatic centering vise, hydraulic blade descent
• Automatic shut-off and vise release
• 220V, 3PH

The CS-C485SA is a 16-1/2" vertical column cold saw and is a semi automatic machine that uses a Yaskawa® inverter drive to control the saw blade speed up to 120 rpm's. This cold saw comes standard with an industrial grade coolant system, drive motor and hydraulic feeding system that will provide decades of profitable use to any demanding fabrication or machine shop.

• Miters left and right 
• Centering vise 
• Cuts non-ferrous metals 
• Blade turns at 3200 rpm

• Bimetal
• 4/6T
• 1" X .035" X 144"

• Blade Length: 162"
• Motor: 2.5 HP Single Phase
• Table Dimensions: 23-5/8" x 21-5/8"
• Table Tilt Right to Left: 0°/45°

• Saw blade size: 18”
• Cutting capacity (thickness x width): 2” x 12”/ 3” x 11” / 4” x 10”
• Saw blade speed: 3200 RPM
• Motor: 10 HP IE3

• Saw blade size: 20” / 22” / 24” (standard)
• Cutting capacity (thickness x width): 2” x 21”/ 4” x 19” / 6” x 15” / 8” x 8”
• Saw blade speed: 2400 RPM
• Motor: 15 HP IE3

• Saw blade size: 18”
• Cutting capacity (thickness x width): 2” x 12”/ 3” x 11” / 4” x 10”
• Saw blade speed: 3200 RPM
• Motor: 10 HP IE3