Searching thousands of products...

• Diameter to Column: 17”
• Head Travel: 61”
• Column to Spindle: 78”
• Motor: 220V, 7.5 HP

• Diameter to Column: 17”
• Head Travel: 61”
• Column to Spindle: 78”
• Motor: 440V, 7.5 HP

• Cuts Non-ferrous metals - Blade turns at 3200 rpm
• 41/4" Capacity
• Miters left and right
• 220V, 3PH

• 14" Blade
• Miters 45º Left & Right with self centering vice
• 220V, 3PH
• 4.33" Round Tube Capacity at 90º

• 11" Blade
• Miter both ways, Stop Mechanism
• 23/4" Capacity
• Self centering vice

• 10" Blade
• Manual Feed
• Mieters up to 45º left and right
• 110V, 1PH

• 12.5" Blade
• Manual Feed
• 4" Tube at 90º
• 220V, 1PH

• 14" Blade
• Variable speed, inverter driven with digital readout for rpm
• Miters 45º Left & Right
• 4.7" Round Tube Capacity at 90º

• Blade drive reduction gearbox operates in an oil bath for increased durability
• Cast iron frame
• Flood coolant system
• Flood coolant system with a 1-1/3 Gallon coolant reservoir and pump with flow control system extends blade life
• Fully adjustable material depth stop for sawing repeatability and increased production

• Blade drive reduction gearbox operates in an oil bath for increased durability
• Cast iron frame
• Flood coolant system
• Flood coolant system with a 1-1/3 Gallon coolant reservoir and pump with flow control system extends blade life
• Fully adjustable material depth stop for sawing repeatability and increased production

• 315mm (12") Ferrous Cold Saw for steel, stainless and tough to cut alloys
• Blade drive reduction gearbox operates in an oil bath for increased durability
• Flood coolant system with a 1-1/3 Gallon coolant reservoir and pump with flow control system extends blade life
• Fully adjustable material depth stop for sawing repeatability and increased production
• Hardened and ground direct drive worm shaft and bronze worm wheel transmits maximum torque to the saw blade

• 275mm (10") Ferrous Cold Saw for steel, stainless and tough to cut alloys
• Blade drive reduction gearbox operates in an oil bath for increased durability
• Flood coolant system with a 1-1/3 Gallon coolant reservoir and pump with flow control system extends blade life
• Fully adjustable material depth stop for sawing repeatability and increased production
• Hardened and ground direct drive worm shaft and bronze worm wheel transmits maximum torque to the saw blade

• Pneumatic centering vise w/ Stock stop mechanism
• 41/4" Capacity
• 220V, 3PH
• 14" Blade

• 11" Blade
• Manual Feed
• Miters up to 45º Left & Right
• 110V, 1PH

• 41/4" Capacity
• Pneumatic centering vise, hydraulic blade descent
• Automatic shut-off and vise release
• 220V, 3PH

The CS-C485SA is a 16-1/2" vertical column cold saw and is a semi automatic machine that uses a Yaskawa® inverter drive to control the saw blade speed up to 120 rpm's. This cold saw comes standard with an industrial grade coolant system, drive motor and hydraulic feeding system that will provide decades of profitable use to any demanding fabrication or machine shop.

• Miters left and right 
• Centering vise 
• Cuts non-ferrous metals 
• Blade turns at 3200 rpm

• 10° Inclusive cutting capacity
• Mounts to predrilled and tapped holes
• Specially designed for each model

• Precision ground components
• Rear mounted lever action
• Specially designed for each model
• Uses 5C collets

• Bimetal
• 4/6T
• 1" X .035" X 144"

• Precision ground components
• Rear mounted lever action
• Specially designed for each model
• Uses 5C collets
• 30 x 7 x 7 in

• 10° Inclusive cutting capacity
• Mounts to predrilled and tapped holes
• Specially designed for each model
• 26.6 x 12.7 x 9.8 in
• Attachment length 18 in

• 100 Series model frames are forged of superior quality steels
• Forged square head spindle with rolled thread. Black oxide coating for added strength
• Perma-Pads® are standard and are also black-oxide coated
• Recommended for heavy industrial and construction job site demands, the heavy-duty models are some of the toughest products available for their weight to strength ratio

• 100 Series model frames are forged of superior quality steels
• Forged square head spindle with rolled thread. Black oxide coating for added strength
• Perma-Pads® are standard and are also black-oxide coated
• Recommended for heavy industrial and construction job site demands, the heavy-duty models are some of the toughest products available for their weight to strength ratio