Searching thousands of products...

• Abrasive Belt Size: 25” x 60”
• Working Width: 24″
• Minimum Part Length: 13″
• Minimum Thickness Opening: 5.9″

• Abrasive Belt Size: 25” x 60”
• Working Width: 24″
• Minimum Part Length: 13″
• Minimum Thickness Opening: 5.9″

• Main Motor: 10 HP
• Working Width: 36″
• Minimum Part Length: 12.5″
• Maximum Thickness Opening: 5.9″

• Main Motor: 15 HP
• Working Width: 36″
• Minimum Part Length: 12.5″
• Maximum Thickness Opening: 5.9″

• Feed Motor: 1 HP
• Working Width: 36″
• Minimum Part Length: 12.5″
• Maximum Thickness Opening: 5.9″

• 11" Blade
• Miter both ways, Stop Mechanism
• 23/4" Capacity
• Self centering vice

• 14" Blade
• Miters 45º Left & Right with self centering vice
• 220V, 3PH
• 4.33" Round Tube Capacity at 90º

• Cuts Non-ferrous metals - Blade turns at 3200 rpm
• 41/4" Capacity
• Miters left and right
• 220V, 3PH

• 10" Blade
• Manual Feed
• Mieters up to 45º left and right
• 110V, 1PH

• 12.5" Blade
• Manual Feed
• 4" Tube at 90º
• 220V, 1PH

• 14" Blade
• Variable speed, inverter driven with digital readout for rpm
• Miters 45º Left & Right
• 4.7" Round Tube Capacity at 90º

• Blade drive reduction gearbox operates in an oil bath for increased durability
• Cast iron frame
• Flood coolant system
• Flood coolant system with a 1-1/3 Gallon coolant reservoir and pump with flow control system extends blade life
• Fully adjustable material depth stop for sawing repeatability and increased production

• Blade drive reduction gearbox operates in an oil bath for increased durability
• Cast iron frame
• Flood coolant system
• Flood coolant system with a 1-1/3 Gallon coolant reservoir and pump with flow control system extends blade life
• Fully adjustable material depth stop for sawing repeatability and increased production

• 315mm (12") Ferrous Cold Saw for steel, stainless and tough to cut alloys
• Blade drive reduction gearbox operates in an oil bath for increased durability
• Flood coolant system with a 1-1/3 Gallon coolant reservoir and pump with flow control system extends blade life
• Fully adjustable material depth stop for sawing repeatability and increased production
• Hardened and ground direct drive worm shaft and bronze worm wheel transmits maximum torque to the saw blade

• 275mm (10") Ferrous Cold Saw for steel, stainless and tough to cut alloys
• Blade drive reduction gearbox operates in an oil bath for increased durability
• Flood coolant system with a 1-1/3 Gallon coolant reservoir and pump with flow control system extends blade life
• Fully adjustable material depth stop for sawing repeatability and increased production
• Hardened and ground direct drive worm shaft and bronze worm wheel transmits maximum torque to the saw blade

• Cutting Angles: +60° ~ 0° ~-60°
• Cycle Speed: 30-45 cuts/min
• Saw Blade Size: 20″
• Saw Arbor Diameter: 1″

• Cutting Angles: +60° ~ 0° ~ -60°
• Cycle Speed: 35-40 cuts/min
• Saw Blade Size: 24″
• Saw Arbor Diameter: 1″

• Pneumatic centering vise w/ Stock stop mechanism
• 41/4" Capacity
• 220V, 3PH
• 14" Blade

• 11" Blade
• Manual Feed
• Miters up to 45º Left & Right
• 110V, 1PH

• Max. Cutting Range (W x H) – 11.8” x 2.75” OR 5.9” x 3.9” with 18” Blade
• Saw Spindle Speed: 3200 RPM
• Feed Motor (Servo Motor): 2.7HP
• Max. Feed Speed: Variable to 262 ft/min

• 41/4" Capacity
• Pneumatic centering vise, hydraulic blade descent
• Automatic shut-off and vise release
• 220V, 3PH

The CS-C485SA is a 16-1/2" vertical column cold saw and is a semi automatic machine that uses a Yaskawa® inverter drive to control the saw blade speed up to 120 rpm's. This cold saw comes standard with an industrial grade coolant system, drive motor and hydraulic feeding system that will provide decades of profitable use to any demanding fabrication or machine shop.

• Attaches quickly and securely into place
• Included Equipment: Material hold down, Extra Lower Blade Holder, Onboard Dust Blower
• Large 11-5/8” x 21”, 1/4” thick steel table provides a stable working surface while also limiting vibration
• Removable dust port on underside of table to collect dust at the source
• Slotted table for easier and quicker blade changes

• Adjustable Material Stop
• Automatic blade shut off switch stops the sawing process
• Built-in, self-propelled chip brush prevents chip build up in blade guides
• Dual mitering allows for compound angle cutting of 60° right and 45° left
• Heavy-duty construction reduces vibration and deflection