Searching thousands of products...

  • Motor: 2 HP, 220V, single-phase, 8.6A, 1720 RPM
  • Distance between lower shaft centers: 10-3/4"
  • Minimum outer radius: 11-3/4"
  • Maximum bending speed: 14.8 FPM
$4,934
As low as $160.35/mo

  • Capacity: 16-gauge mild steel
  • Max. Forming Length: 49 inches
  • Roll Diameter: 3”
  • Gear Ratio: 4:1
$4,595
As low as $149.33/mo

  • Capacity: 22 Ga
  • Forming Length: 36″
  • Roll Diameter: 2″
  • Stand Not Included
$1,645
As low as $53.46/mo

  • Maximum Material Width: 50”
  • Maximum Material Capacity: 16-Gauge Mild Steel
  • Roller Diameter: 2.4"/60mm
  • Minimum Bending Diameter: 3.5"/90mm
$3,895
As low as $126.58/mo

  • Maximum Material Width: 60”
  • Maximum Material Capacity: 3 Gauge Mild Steel
  • Roller Diameter: 5”/130mm
  • Minimum Bending Diameter: 7.7"/195mm
$27,500
As low as $544.22/mo

  • Capacity: T-D-P 18-24 ga
  • Motor: 10HP 220V Three Phase 
  • Forming Speed: 50 FPM
  • Produces either TDC or TDF flanges 
$28,950
As low as $572.92/mo

  • Speed: 90 feet per minute
  • Motor: 5 HP 230V Three Phase 
  • Drive: Matched Double Vee Belt
  • Feed table height: 34 5/8”
MSRP: $16,500
$15,995
As low as $316.54/mo

  • Speed: 90 feet per minute
  • Motor: 5 HP 460V Three Phase 
  • Drive: Matched Double Vee Belt
  • Feed table height: 34 5/8”
$16,295
As low as $322.47/mo

  • Capacity: 20-26 Gauge Mild Steel
  • Depth of Pocket: 5/16″ 
  • Speed: Approx. 25 FPM
  • Motor: 1 HP, 115V
$5,050
As low as $164.12/mo

  • Capacity: 20-26 Gauge Mild Steel
  • Depth of Pocket: 5/16″ 
  • Speed: Approx. 25 FPM
  • Motor: 1 HP, 230V
$5,075
As low as $164.93/mo

  • Capacity: 16-20 Ga.
  • Motor: 3HP / 230V / Three Phase
  • Depth of pocket size: ½” width of hammer-over edge adjustable up to 3/8
  • Speed: 40-45 ft per minute
$7,995
As low as $259.83/mo

  • Capacity: 24 gauge mild steel 
  • Motor: 1/2 HP / 115V / Single Phase
  • Speed: Approx 35 FPM 
  • Depth of Pocket: Approx 5/16" with hammer edge of 3/8"
$3,095
As low as $100.58/mo

  • Capacity: 20-26 gauge 
  • Motor: 3 HP / 220V / Three Phase / 60 Hz
  • Speed: Approx. 60 FPM
  • 9 Station button lock rollformer
$8,995
As low as $292.33/mo

  • Capacity: 24 gauge mild steel 
  • Motor: 1/2 HP / 115V / Single Phase
  • Speed: Approx 35 FPM 
  • Flange Height: 3/16"
$3,675
As low as $119.43/mo

  • Main motor: 10 HP, 220V/440V, 3-phase
  • Length of crosscut: 126"
  • Sliding table size: 15-5/8" x 126"
  • Maximum rip capacity: 51-1/2"
$17,924
As low as $354.71/mo

  • Main motor: 10HP, 220V/440V
  • Sliding table size: 14" x 126"
  • Maximum rip capacity: 51-1/4"
  • Maximum sheet capacity: 124" x 134"
$11,524
As low as $374.53/mo

  • Motor: 5 HP, 230V, single-phase
  • Sliding table size: 12-1/4" x 63"
  • Maximum rip capacity: 33"
  • Main table dimensions: 14-3/8" x 27"
$5,278
As low as $171.53/mo

  • Motor: 7-1/2 HP, 220V/440V
  • Max capacity of crosscut fence: 68-1/2"
  • Maximum sheet capacity: 63" x 101-1/2"
  • Main Table Dimensions: 35-1/4" x 21-1/2"
$7,064
As low as $229.58/mo

  • Capacity: 24 Ga.
  • Forming Length: 50”
  • Roll Diameter: 2”
  • Stand Not Included 
$1,945
As low as $63.21/mo

  • Capacity: 22-28 Ga. galvanized mild steel 
  • Width of S-Cleat: 1-1/16" 
  • Width of Drive Cleat: 1-1/8" 
  • Motor: 1.5HP / 110V / Single Phase 
$6,075
As low as $197.43/mo

  • Capacity: 24 Ga. Mild Steel
  • Throat: 7"
  • Throat: Pedestal Stand 
  • UPS Capable 
$1,245
As low as $40.46/mo

  • Motor: 3HP, 3-phase, 220V, 60Hz
  • Saw Blade (in): 1-3/8"W x .043"T x 155.5"L
  • Floor to table height: 27"
  • Machine dimensions: 83"L x 43"W x 55"H
$13,888
As low as $451.36/mo