Searching thousands of products...

  • Capacity: 16-gauge mild steel
  • Max. Forming Length: 49 inches
  • Roll Diameter: 3”
  • Gear Ratio: 4:1
$4,945
As low as $160.71/mo
  • Capacity: 22 Ga
  • Forming Length: 36″
  • Roll Diameter: 2″
  • Stand Not Included
$1,765
As low as $57.36/mo
  • Maximum Material Width: 50”
  • Maximum Material Capacity: 16-Gauge Mild Steel
  • Roller Diameter: 2.4"/60mm
  • Minimum Bending Diameter: 3.5"/90mm
$3,895
As low as $126.58/mo
  • Maximum Material Width: 60”
  • Maximum Material Capacity: 3 Gauge Mild Steel
  • Roller Diameter: 5”/130mm
  • Minimum Bending Diameter: 7.7"/195mm
$27,500
As low as $544.22/mo
  • Capacity: T-D-P 18-24 ga
  • Motor: 10HP 220V Three Phase 
  • Forming Speed: 50 FPM
  • Produces either TDC or TDF flanges 
$32,500
As low as $643.17/mo
  • Speed: 90 feet per minute
  • Motor: 5 HP 230V Three Phase 
  • Drive: Matched Double Vee Belt
  • Feed table height: 34 5/8”
MSRP: $16,500
$15,995
As low as $316.54/mo
  • Speed: 90 feet per minute
  • Motor: 5 HP 460V Three Phase 
  • Drive: Matched Double Vee Belt
  • Feed table height: 34 5/8”
$16,295
As low as $322.47/mo
  • Capacity: 20-26 Gauge Mild Steel
  • Depth of Pocket: 5/16″ 
  • Speed: Approx. 25 FPM
  • Motor: 1 HP, 115V
$5,355
As low as $174.03/mo
  • Capacity: 20-26 Gauge Mild Steel
  • Depth of Pocket: 5/16″ 
  • Speed: Approx. 25 FPM
  • Motor: 1 HP, 230V
$5,355
As low as $174.03/mo
  • Capacity: 16-20 Ga.
  • Motor: 3HP / 230V / Three Phase
  • Depth of pocket size: ½” width of hammer-over edge adjustable up to 3/8
  • Speed: 40-45 ft per minute
$7,995
As low as $259.83/mo
  • Capacity: 24 gauge mild steel 
  • Motor: 1/2 HP / 115V / Single Phase
  • Speed: Approx 35 FPM 
  • Depth of Pocket: Approx 5/16" with hammer edge of 3/8"
$3,295
As low as $107.08/mo
  • Capacity: 20-26 gauge 
  • Motor: 3 HP / 220V / Three Phase / 60 Hz
  • Speed: Approx. 60 FPM
  • 9 Station button lock rollformer
$9,295
As low as $302.08/mo
  • Capacity: 24 gauge mild steel 
  • Motor: 1/2 HP / 115V / Single Phase
  • Speed: Approx 35 FPM 
  • Flange Height: 3/16"
$3,885
As low as $126.26/mo
  • Speed: 42 rpm
  • Shaft diameter: 1.3”
  • Width of vise: 4”
  • Main motor rating: 1.1 Hp
$3,451.94
As low as $112.18/mo
  • Speed: 42 rpm
  • Shaft diameter: 1.3"
  • Width of vise: 4”
  • Main motor rating: 1.1 Hp
$3,020.83
As low as $98.17/mo
  • Main motor rating: 0.75 / 1.3 Hp
  • Shaft diameter: 1.6”
  • Speed: 18/36 rpm
  • Width of vise: 6”
$4,853.33
As low as $157.73/mo
  • Main motor rating: 1 / 1.7 Hp
  • Shaft diameter: 1.3”
  • Speed: 18/36 rpm
  • Width of vise: 6”
$5,073.06
As low as $164.87/mo
  • Main motor rating: ½ HP
  • Air supply: 87 psi
  • Speed: 38, 19 rpm
  • Width of vise: 6”
$8,165.28
As low as $265.37/mo
  • Capacity: 24 Ga.
  • Forming Length: 50”
  • Roll Diameter: 2”
  • Stand Not Included 
$2,070
As low as $67.27/mo
  • Cutting speed: 118, 184 fpm
  • Motor rating hydraulic pump: 1 Hp
  • Motor rating coolant pump: 0.1 Hp
  • Blade dimensions: 196.85” x 1.61” x 0.05”
$20,970.56
As low as $415.00/mo
  • Belt speed: 131 / 262 fpm
  • Main motor rating: 0.8 / 1.1 Hp
  • Cutting capacity 0° Round: 6”
  • Cutting capacity 0° Flat (length x width): 5” x 8”
$3,281.94
As low as $106.66/mo
  • Cutting speed: 89, 148, 226 fpm
  • Motor rating hydraulic pump: 0.7 Hp
  • Motor rating coolant pump: 0.1 Hp
  • Blade dimensions: 137.99” x 1.06” x 0.04”
$9,885.50
As low as $321.27/mo
  • Blade width: 0.12” - 0.63”
  • Blade length: 112.4” - 115.16”
  • Cutting capacity height x throat: 7” x 12”
  • Cutting speed: 621.3 fpm
$6,531.39
As low as $212.27/mo
  • Motor rating main drive: 1.5HP
  • Cutting capacity 45° (square): 5”
  • Cutting capacity 45° (round): 5”
  • Belt speed: 79 / 135 / 200 / 269 fpm
$4,071.28
As low as $132.31/mo