Tin Knocker

  • Layout
Tin Knocker 8ft 16Ga. Leaf Brake TK 816 at Elite Metal Tools
Tin Knocker 8ft 16Ga. Leaf Brake TK 816
  • Capacity: 16 Ga.
  • Bend Length: 8'1"
  • Beam Lift: 2-1/4" 
  • Depth of Box or Pan: 2" 3sides
$6,995.00
As low as $227/mo
View Details
Tin Knocker 10ft 18Ga. Leaf Brake TK 1018 at Elite Metal Tools
Tin Knocker 10ft 18Ga. Leaf Brake TK 1018
  • Capacity: 18 Ga.
  • Bend Length: 10'1"
  • Beam Lift: 2-1/4"
  • Box or Pan Depth: 2" 3sides
$8,199.00
As low as $266/mo
View Details
Tin Knocker 10ft 16Ga. Leaf Brake TK 1016 at Elite Metal Tools
Tin Knocker 10ft 16Ga. Leaf Brake TK 1016
  • Capacity: 16 Ga. 
  • Bend Length: 10'1"
  • Beam Lift: 2-1/4"
  • Depth of Box or Pan: 2" 3sides
$10,375.00
As low as $337/mo
View Details
Tin Knocker 10ft 14Ga. Air Shear TK 1014 at Elite Metal Tools
Tin Knocker 10ft 14Ga. Air Shear TK 1014
  • Capacity (Mild Steel): 14 gauge 
  • Capacity (Stainless Steel): 18 gauge 
  • Cycle Speed: 20 strokes per minute 
  • Air Supply: 80-gallon tank needs 90 psi at 14 CFM
$25,999.00
As low as $514/mo
View Details
Tin Knocker 48" Manual TK Jacketing Shear at Elite Metal Tools
Tin Knocker 48" Manual TK Jacketing Shear
  • Capacity: 26-gauge galvanized/stainless steel & 22-gauge aluminum
  • Maximum Sheet Width: 48″
  • Table top height or working surface height: 34″
  • Point of operation safety guard
$4,875.00
As low as $158/mo
View Details
Tin Knocker 30" 20Ga. TK No. 30 Cleat Bender at Elite Metal Tools
Tin Knocker 30" 20Ga. TK No. 30 Cleat Bender
  • Capacity: 20 Ga Mild Steel 
  • Bend Length: 30" 
  • Cleat Depth: 0.500"
  • Stand Not Included 
$1,245.00
As low as $40/mo
View Details
Tin Knocker HM Machinery 20ga x 50” Box and Pan Brake 1300S at Elite Metal Tools
Tin Knocker HM Machinery 20ga x 50” Box and Pan Brake 1300S
  • Max bend length: 53”
  • Max Capacity: 20-gauge mild steel
  • Max opening: 2”
  • Max folding angle: 95 degrees
$2,035.00
As low as $66/mo
View Details
Tin Knocker HM Machinery 20Ga. x 53” Straight Brake 1300H at Elite Metal Tools
Tin Knocker HM Machinery 20Ga. x 53” Straight Brake 1300H
  • Maximum Bend Length: 53”
  • Maximum Material Capacity: 20-Gauge Mild Steel
  • Maximum Opening: 1.5”
  • Maximum Folding Angle: 95 Degrees
$1,820.00
As low as $59/mo
View Details
Tin Knocker 16Ga. 48" Box & Pan Brake TK 1648 at Elite Metal Tools
Tin Knocker 16Ga. 48" Box & Pan Brake TK 1648
  • Capacity: 16 Ga.
  • Bend Length: 48" 
  • Max Beam Length: 1.25" 
  • Stand Not Included 
$2,549.00
As low as $82/mo
View Details
Tin Knocker 22Ga. 48" Box & Pan Brake TK 2248 at Elite Metal Tools
Tin Knocker 22Ga. 48" Box & Pan Brake TK 2248
  • Capacity: 22 Ga.
  • Bend Length: 48" 
  • Max Beam Lift: 7/8"
  • Stand Not Included
$1,829.00
As low as $59/mo
View Details
Tin Knocker 10 Ga. No. 2 Throatless Hand Shear TK 2 at Elite Metal Tools
Tin Knocker 10 Ga. No. 2 Throatless Hand Shear TK 2
  • Max Capacity 10ga Mild Steel
  • Max Capacity 14ga Stainless Steel
  • 15” Height (Less Handle)
  • 38 lbs.
$685.00
As low as $22/mo
View Details
Tin Knocker 230V Single Phase The Wizard 5’x10’ HVAC Plasma System at Elite Metal Tools
Tin Knocker 230V Single Phase The Wizard 5’x10’ HVAC Plasma System
  • Load Capacity: 2,000 lb (full sheet of 1” plate)
  • Cutting Speed: 300ipm
  • Repeatability (approx.): ± 0.0005”
  • Power Supply: 230V Single Phase
$38,999.00
As low as $771/mo
View Details
Tin Knocker 400V Three Phase The Wizard 5’x10’ HVAC Plasma System at Elite Metal Tools
Tin Knocker 400V Three Phase The Wizard 5’x10’ HVAC Plasma System
  • Load Capacity: 2,000 lb (full sheet of 1” plate)
  • Cutting Speed: 300ipm
  • Repeatability (approx.): ± 0.0005”
  • Power Supply: 400V Three Phase
$38,999.00
As low as $771/mo
View Details
Tin Knocker 22Ga. Straight Brake with Floor Stand TK 622 at Elite Metal Tools
Tin Knocker 22Ga. Straight Brake with Floor Stand TK 622
  • Capacity: 22Ga Mild Steel 
  • Bend Length: 6' 
  • Beam Lift: 1-1/4"
  • Depth of Box or Pan: 2" 3sides 
$2,549.00
As low as $82/mo
View Details
Tin Knocker 4ft x 22 Ga. Portable Brake TK 422 PB at Elite Metal Tools
Tin Knocker 4ft x 22 Ga. Portable Brake TK 422 PB
  • Capacity: 22 Ga Mild Steel
  • Bend Length: 48.25”
  • Beam Lift: 1”
  • Weight: 350 lbs.
$1,920.00
As low as $62/mo
View Details
Tin Knocker 14 Ga. No.1 Throatless Hand Shear TK 1 at Elite Metal Tools
Tin Knocker 14 Ga. No.1 Throatless Hand Shear TK 1
  • Max Capacity (Mild Steel): 14 Ga.
  • Max Capacity (Stainless Steel): 18 Ga.
  • Height: 12" (less handle) 
  • Weight: 23 lbs
$585.00
As low as $19/mo
View Details
Tin Knocker 16 Gauge x 72" Universal Hand Brake TK 616 at Elite Metal Tools
Tin Knocker 16 Gauge x 72" Universal Hand Brake TK 616
  • Capacity with lower tooling flanges: 72" x 16Ga
  • Capacity without lower tooling flanges: 72" x 20Ga
  • Lift of beam: 1.5"
  • Min reverse bend: 5/8"
$9,350.00
As low as $303/mo
View Details
Tin Knocker HM Machinery 20ga x 50” Straight Brake with Angled Nose Bar 1300L at Elite Metal Tools
Tin Knocker HM Machinery 20ga x 50” Straight Brake with Angled Nose Bar 1300L
  • Actual max bend length: 53”
  • Max Capacity: 20-gauge mild steel
  • Max opening: 1.5”
  • Max folding angle: 135 degrees
$1,605.00
As low as $52/mo
View Details
Tin Knocker HM Machinery 20Ga. Straight Brake 2000L at Elite Metal Tools
Tin Knocker HM Machinery 20Ga. Straight Brake 2000L
  • Maximum Bend Length: 79”
  • Maximum Material Capacity: 20-Gauge Mild Steel
  • Maximum Opening: 1.5”
  • Maximum Folding Angle: 135 Degrees
$5,999.00
As low as $194/mo
View Details
Tin Knocker HM Machinery Manual Foot Clamp Brake HS-3S at Elite Metal Tools
Tin Knocker HM Machinery Manual Foot Clamp Brake HS-3S
  • Maximum Bend Length: 50”
  • Maximum Material Capacity: 16-Gauge Mild Steel
  • Maximum Opening: 1.78”
  • Maximum Folding Angle: 135 Degrees
$5,450.00
As low as $177/mo
View Details
Tin Knocker HM Machinery 79” 16 Ga. Manual Brake HS-7S at Elite Metal Tools
Tin Knocker HM Machinery 79” 16 Ga. Manual Brake HS-7S
  • Maximum Bend Length: 79"
  • Maximum Material Capacity: 16g
  • Maximum Opening: 1.78"
  • Maximum Folding Angle: 135 degrees
$7,350.00
As low as $238/mo
View Details
Tin Knocker HM Machinery Superflex Universal Brake HS-3S-S at Elite Metal Tools
Tin Knocker HM Machinery Superflex Universal Brake HS-3S-S
  • Maximum Bend Length: 50”
  • Maximum Material Capacity: 16-Gauge Mild Steel
  • Maximum Opening: 1.78”
  • Maximum Folding Angle: 100 or 150 Degrees (depending on profile)
$7,095.00
As low as $230/mo
View Details

Founded in 1998 and since then has been supplying companies with both new and used sheet metal machinery. Since opening they have become a trusted supplier in the sheet metal industry. They sell machines such as cleat benders, button locks, and slitters. 

If you are interested in cleat benders or anything else Tin Knocker has to offer, please contact us. Here at Elite Metal Tools we offer low prices and the best customer service,