Palmgren

  • Layout
Palmgren 11” x 27” Combination Engine Bench Lathe and Mill 9684520 at Elite Metal Tools
Palmgren 11” x 27” Combination Engine Bench Lathe and Mill 9684520
  • Motor: 1 HP / 115 V / 60HZ / 1PH
  • Center Height: 5.51 in
  • Max Turning Diameter: 11.02 in
  • Distance Between Centers: 27.56 in
$5,067.00
$4,750.31
As low as $154/mo
View Details
Palmgren TU2506 10” x 21” Bench Lathe 9684509 at Elite Metal Tools
Palmgren TU2506 10” x 21” Bench Lathe 9684509
  • Motor: 1HP - 115V - 1PH - 60Hz
  • Swing Over Bed: 10"
  • Distance Between Centers: 21-5/8"
  • Number of Spindle Speeds: 6
$3,067.00
$2,875.31
As low as $93/mo
View Details
Palmgren 12” x 36” 2 HP Engine Lathe 9684510 at Elite Metal Tools
Palmgren 12” x 36” 2 HP Engine Lathe 9684510
  • Motor: 2HP - 115/230V - 1PH - 60Hz
  • Distance Between Centers: 36"
  • Spindle Bore: 1-1/2"
  • Number of Spindle Speeds: 18
$11,333.00
$10,624.68
As low as $345/mo
View Details
Palmgren 9” x 20” Combination Bench Lathe and Mill 9680213 at Elite Metal Tools
Palmgren 9” x 20” Combination Bench Lathe and Mill 9680213
  • Lathe Motor: 1PH - 115V - 13.6 Amps - 1PH - 60 Hz
  • Height of Centers: 4-3/4"
  • Max Turning Diameter: 9-7/8"
  • Distance Between Centers: 20"
$4,667.00
$4,375.31
As low as $142/mo
View Details
Palmgren 9” x 20” Bench Lathe 9684504 at Elite Metal Tools
Palmgren 9” x 20” Bench Lathe 9684504
  • Motor: 1 HP / 115 V / 60HZ / 1PH
  • Center Height: 4.92 in
  • Distance Between Centers: 21.65 in
  • Turning Diameter: 9.84 in
$2,933.00
$2,749.68
As low as $89/mo
View Details
Palmgren 8” x 12” Bench Lathe 9684508 at Elite Metal Tools
Palmgren 8” x 12” Bench Lathe 9684508
  • Motor: 7/8HP - 115V - 1PH - 60Hz
  • Distance Between Centers: 12"
  • Spindle Bore: 3/4"
  • Bed Width: 3-15/16"
$2,133.00
$1,999.68
As low as $64/mo
View Details
Palmgren 16” Heavy Duty Rotary Table 9634120 at Elite Metal Tools
Palmgren 16” Heavy Duty Rotary Table 9634120
  • Max Load Horizontal: 310 lbs.
  • Max Load Vertical: 133 lbs.
  • Gear Ratio: 90 to 1 in
  • Center Hole: MT-4
$3,745.00
$3,042.81
As low as $98/mo
View Details
Palmgren 16” x 60” Engine Lathe with DRO 9684524 at Elite Metal Tools
Palmgren 16” x 60” Engine Lathe with DRO 9684524
  • Motor: 6HP - 230V - 3PH - 60Hz
  • Distance Between Centers: 60"
  • Number of Spindle Speeds: 16
  • Compound Travel: 5-1/2"
$26,667.00
$25,000.31
As low as $494/mo
View Details
Palmgren 10HP 230V Three Phase 22" x 80" Engine Lathe 9684556 at Elite Metal Tools
Palmgren 10HP 230V Three Phase 22" x 80" Engine Lathe 9684556
  • Swing Over Bed: 22"
  • Distance Between Centers: 80"
  • Spindle Taper: MT7
  • Spindle Bore: 4-1/8"
$38,667.00
$36,250.31
As low as $717/mo
View Details
Palmgren 2HP 230V Three Phase 13” x 40” Engine Lathe with 2” Bore 9684550 at Elite Metal Tools
Palmgren 2HP 230V Three Phase 13” x 40” Engine Lathe with 2” Bore 9684550
  • Spindle Taper: MT 6
  • Number of Spindle Speeds: 8
  • Spindle Speed: 70 - 2000 RPM
  • Spindle Seat: Camlock D1-5
$11,867.00
$11,125.31
As low as $361/mo
View Details
Palmgren 2HP 230V Three Phase 14” x 40” Engine Lathe with 2” Bore 9684551 at Elite Metal Tools
Palmgren 2HP 230V Three Phase 14” x 40” Engine Lathe with 2” Bore 9684551
  • Spindle Taper: MT 5
  • Number of Spindle Speeds: 8 or 16
  • Spindle Speed: 70 - 2000 RPM
  • Spindle Seat: Camlock D1-4
$17,333.00
$16,249.68
As low as $321/mo
View Details
Palmgren 1HP Single Phase 17” 16-Speed Floor Step Pulley Drill Press 9680177 at Elite Metal Tools
Palmgren 1HP Single Phase 17” 16-Speed Floor Step Pulley Drill Press 9680177
  • Voltage: 120/240
  • Amps: 10/5 A
  • Capacity Cast Iron: 5/8 in
  • RPM: 138-3476
$1,299.00
As low as $42/mo
View Details
Palmgren 12” Heavy Duty Rotary Table 9634118 at Elite Metal Tools
Palmgren 12” Heavy Duty Rotary Table 9634118
  • Height at 0 degrees: 5.32 in
  • Gear Ratio: 90 to 1
  • Max Load Horizontal: 265 lbs.
  • Max Load Vertical: 132 lbs.
$2,012.00
$1,665.00
As low as $54/mo
View Details
Palmgren 230V Three Phase 20” Power Feed Gear Head Drill Press with Foot Reversing Switch 9680246 at Elite Metal Tools
Palmgren 230V Three Phase 20” Power Feed Gear Head Drill Press with Foot Reversing Switch 9680246
  • Capacity Steel: 1"
  • Capacity Cast Iron: 1-1/8"
  • Power Feed: Yes
  • Number Of Speeds: 8
$9,375.00
As low as $304/mo
View Details
Palmgren 2HP 460V Three Phase 14” x 40” Engine Lathe with 2” Bore 9684552 at Elite Metal Tools
Palmgren 2HP 460V Three Phase 14” x 40” Engine Lathe with 2” Bore 9684552
  • Spindle Taper: MT 5
  • Number of Spindle Speeds: 8 or 16
  • Spindle Speed: 70 - 2000 RPM
  • Spindle Seat: Camlock D1-4
$17,333.00
$16,249.68
As low as $321/mo
View Details
Palmgren 10” Rotary Cross Slide Table with Angle 9634103 at Elite Metal Tools
Palmgren 10” Rotary Cross Slide Table with Angle 9634103
  • Table Diameter: 10 in
  • Travel (X x Y): 4 x 4 in
  • Base (X x Y): 9 x 5 in
  • Height at 0 degrees: 5- 3/4 in
$1,871.00
$1,520.19
As low as $49/mo
View Details
Palmgren 8” Rotary Cross Slide Table 9632803 at Elite Metal Tools
Palmgren 8” Rotary Cross Slide Table 9632803
  • Top Grad.: 360 in
  • Base Keyway: 5/8 in
  • Gear Ratio: 40:1
  • Table T-slots: 5/8 in
$1,569.00
$1,274.81
As low as $41/mo
View Details
Palmgren 1.5HP 240V Three Phase 20" 16-Speed Floor Step Pulley Drill Press 9680210 at Elite Metal Tools
Palmgren 1.5HP 240V Three Phase 20" 16-Speed Floor Step Pulley Drill Press 9680210
  • Capacity Cast Iron: 9/16 in
  • RPM: 120-3605
  • Spindle Taper: MT3
  • Spindle Travel: 5 in
$1,975.00
As low as $64/mo
View Details
Palmgren 22” Gear Head Drill Press with Mechanical Clutch Powerfeed 9680212 at Elite Metal Tools
Palmgren 22” Gear Head Drill Press with Mechanical Clutch Powerfeed 9680212
  • Motor: 2HP - 240V - 3PH - 60Hz
  • Number of Speeds: 12
  • Table Work Surface: 16-3/4" x 17-1/2"
  • Spindle to Table: 29-3/4"
$6,667.00
$6,250.31
As low as $203/mo
View Details
Palmgren 1HP 115V Single Phase 16" 16-Speed Step Pulley Floor Drill Press 9680214 at Elite Metal Tools
Palmgren 1HP 115V Single Phase 16" 16-Speed Step Pulley Floor Drill Press 9680214
  • Drilling capacity in steel: Ø 1.103 in
  • Quill Travel: 4.134 in
  • Number of pulley steps: 16 steps
  • Distance spindle - table (max.): 33.858 in
$3,200.00
$3,000.00
As low as $97/mo
View Details
Palmgren 2HP 230V Three Phase 20” GH Drill Press 9680134 at Elite Metal Tools
Palmgren 2HP 230V Three Phase 20” GH Drill Press 9680134
  • Spindle Travel: 5 in
  • Capacity Cast Iron: 1 - 1/8 in
  • Table Work Surface: 15.5 x 14.75 in
  • Capacity Steel: 1 in
$6,800.00
$6,375.00
As low as $207/mo
View Details
Palmgren 1.5HP 230V Three Phase 20” Gear Head Drill Press with Foot Reversing Switch 9680243 at Elite Metal Tools
Palmgren 1.5HP 230V Three Phase 20” Gear Head Drill Press with Foot Reversing Switch 9680243
  • Capacity Steel: 1"
  • Capacity Cast Iron: 1-1/8"
  • Power Feed: No
  • Number Of Speeds: 8
$7,250.00
As low as $235/mo
View Details
Palmgren 20” Gear Head Drill Press 9680223 at Elite Metal Tools
Palmgren 20” Gear Head Drill Press 9680223
  • Motor: 1-1/2 - 2HP - 240V - 3PH - 60Hz
  • Number of Speeds: 8
  • Spindle Travel: 8"
  • Table Work Surface: 15-1/2" x 14 - 13/16"
$5,360.00
$5,025.00
As low as $163/mo
View Details
Palmgren 3HP 220V Three Phase 13” x 40” Variable Speed Engine Lathe 9684526 at Elite Metal Tools
Palmgren 3HP 220V Three Phase 13” x 40” Variable Speed Engine Lathe 9684526
  • Total Length Of Bed: 64"
  • Spindle Bore: 1-9/16"
  • Max. Size Cutting Tool: 1/2"
  • Feed Rod Diameter: 3/4"
$23,125.00
As low as $457/mo
View Details

Founded in 1919 and since then have been creating superior quality machines for their customers. Palmgren is located in Naperville, IL. They use innovative designs and patents to improve their metalworking machines. Some of the many machines that they sell include belt grinders, drill sharpeners, and finishing machines. 

If you are interested in belt grinders or anything else Palmgren has to offer, please contact us. Here at Elite Metal Tools we work as a team to provide our customers with the best customer service and low prices.