Laguna Tools

  • Rip Capacity: 36" standard, 52" option
  • Max. depth of cut @ 90°: 3 1/8"
  • Blade tilt: 0 - 45° Left
  • Arbor Size: 5/8"
  • Sanding belt size: 37" X 60"
  • Max sanding height: 5.9"
  • Adjustable sanding platen: 3"
  • 220V / 1phase
  • 126″ dumbbell sliding table design
  • 7.5HP 3 Phase main motor
  • European-style 51″ rip fence
  • 3/4HP Scoring motor
  • 3HP TEFC 220V, Single-Phase Motor
  • 52” Rip Capacity
  • Max. depth of cut @ 90°: 3 1/8″
  • Max. depth of cut @ 45°: 2 1/8″
  • Motor: 5HP Leeson continuous duty motor
  • Volt:1 phase, 220 volt
  • Throat: 16-1/2″
  • Blade Length: 158"
  • Maximum Stock Width: 25”
  • Maximum Stock Thickness: 9”
  • Maximum Stock Removal 01-12” Wide: 6 mm/1/4”
  • Cutter-head Speed: 4800 RPM
  • Motor: 110v 1.75HP 1phase 60hz/15 Amp.
  • Bed Size: 8 x 72"
  • Max. Depth of Cut: 1/8"
  • Cutterhead Diameter: 3-1/8"
  • Motor: 220v 5HP 1phase 60hz/23Amp.
  • Bed Size: 12x 88"
  • Max. Depth of Cut: 1/8"
  • Cutterhead Diameter: 3-7/8"
  • 25” Compact Wide belt
  • Bed Height Min. - Max.: 32" - 38"
  • Configuration: Combo Head, Roller + Platen
  • Foot Print: 20" X 40"
  • 6-Zone Vacuum Table to hold down parts
  •  Three phase router 220v /30 amp (single phase options available)
  •  Gantry Height: 7.5 inches
  •  Useable Table: 48″ x 96″
  • 3HP TEFC 220V, Single-Phase Motor
  • 36” Rip Capacity
  • Max. depth of cut @ 90°: 3 1/8″
  • Max. depth of cut @ 45°: 2 1/8″
  • Motor: 2.5HP, 9.8Amp, TEFC
  • 12” Resaw
  • Height: 70 ¼”
  • 21 ½” X 16” Table
  • Rip Capacity: 30"
  • Vertical Cut Height: 3 1/8”
  • 45° Cut Height: 2 1/8"
  • Tilt: 0-45° Left
  • Motor: 220v / 3ph
  • Distance Between Centers: 36"
  • Swing Over Bed: 24"
  • RPM: High: 135-3500 Low: 50-1300
  • Work Table Length: 79″
  • Minimum Panel Length: 9.44″
  • Minimum Panel Width: 4 ¾”
  • Panel Thickness (Min – Max): .47″ – 1.77″
  • Impeller/Fan Size: 13.5"
  • Drum Capacity: 32 Gal.
  • Real CFM: 900
  • Motor: 1.5 HP
  • Real CFM: 2450
  • Drum Capacity: 54 Gal.
  • Canister Filter Type: Black 1 Micron
  • Motor: 5 HP | 220v / 1ph
  • Real CFM: 1624
  • Motor: 3 HP | 220v /1ph
  • Canister Cleaning: Internal Pulse Cleaning
  • Impeller/ Fan Size: 15.5"
  • Max sanding width: 36 1/2"
  • Max sanding height: 5.9"
  • Variable feed speed: 1HP
  • 220V / 3 Phase
  • Bed Size: 22 x 28"
  • Max. Depth of cut: 1/4"
  • Max. Stock Thickness: 8"
  • Max. Stock Width: 22"
  • Motor: 220v 7.5HP 3phase 60hz /20 Amp.
  • Bed Size: 16 x 100"
  • Max. Depth of Cut: 1/8"
  • Cutterhead Diameter: 3-7/8"
  • Motor: 3HP, 220V, 1 Ph. 12 Amp.
  • Blade Length: 145"
  • Recommended Breaker: 20 Amp.
  • Resaw Capacity: 16"
  • Motor: 1 3/4 HP, TEFC, 60Hz.
  • Quick Release Blade Tensioner w. 6 &11 O'clock stops
  • Throat Capacity: 13 5/8"
  • Miter T-Slot: 3/8" X 3/4"