Kwikool

  • 60,000 BTU/H – 5 Ton capacity water-cooled
  • Air Flow (CFM): 2000/3 Speed
  • Internal high lift condensate pumps and a 5- gallon reservoir tank
  • Wide Operating range of 60ºF-110ºF
MSRP: $15,445
$11,583.75
As low as $376.47/mo

  • 13.5” x 21” x 4” HEPA Filter
  • Compatible with BioAir Models KBP600, KBP1000, KBX600, & KBX1000
MSRP: $395
$299

  • 25-ft temperature extension wire w/temperature sensor at the end
  • Sensor will turn the unit on/off based on unit temperature set point
  • Compatible with all Kwikool Portable Cooling System models
MSRP: $195
$175

  • Dual duct ceiling kit
  • Used on models: KIB1411, KIB1811, KPHP1811, KPHP2211 & KBIO1411
  • Fast Installation
MSRP: $395
$365

MSRP: $695
$645
As low as $20.96/mo

  • 30’ of Lightweight Duct
  • Used with: KAM14 portable air conditioner
  • 6 inches in diameter
MSRP: $775
$695
As low as $22.58/mo

  • Dual duct ceiling kit
  • Used on models: KIB2411 KIB2421 & KIB3021
  • Fast Installation
MSRP: $475
$450

  • 120,000 BTU/H – 10 Ton capacity water-cooled
  • Air Flow (CFM): 1800/3800
  • Internal high lift condensate pumps and a 5- gallon reservoir tank
  • Wide Operating range of 60ºF-110ºF
MSRP: $25,970
$19,477.50
As low as $385.45/mo

  • Dual duct ceiling kit
  • Used on models: KIB6021 KIB6023 & KIB6043
  • Fast Installation
MSRP: $595
$575
As low as $18.68/mo

  • 20” x 24” x 1” Charcoal Filter
  • Compatible with BioAir Models KBP1800 & KBX1800

  • Single duct ceiling kit
  • Used on model KPAC2421-2
  • Installation takes less than ten minutes
MSRP: $395
$360

  • Dual duct ceiling kit
  • Used on models: KIB12023 & KIB12043
  • Fast Installation
MSRP: $695
$675
As low as $21.93/mo

  • Dual duct ceiling kit
  • Used on model: KIB4221
  • Fast Installation
MSRP: $550
$525
As low as $17.06/mo

  • 16” x 24” x 1” PRE Filter
  • Compatible with BioAir Models KBP600, KBP1000, KBX600, & KBX1000

  • 13.5” x 21” x 1” Charcoal Filter
  • Compatible with BioAir Models KBP600, KBP1000, KBX600, & KBX1000

  • 20” x 24” x 1” PRE Filter
  • Compatible with BioAir Models KBP1800 & KBX1800

  • BTU/hr @95F at 60% RH: 270,000 (25-Ton)
  • Operating Temperatures: 30-110F 50% RH
  • Heat Strips/BTU: 48kW/166,600
  • Condenser Air Flow: 14,000 CFM
MSRP: $67,495
$50,621.25
As low as $1,001.79/mo

  • BTU/hr @95F at 60% RH: 270,000 (25-Ton)
  • Operating Temperatures: 30-110F 50% RH
  • Condenser Air Flow: 14,000 CFM
  • Condenser Fan Speed Control: Variable Frequency Drive 
MSRP: $66,495
$49,871.25
As low as $986.95/mo

  • BTU/hr @95F at 60% RH: 270,000 (25-Ton)
  • Operating Temperatures: 30-110F 50% RH
  • Heat Strips/BTU: 48kW/166,600
  • Condenser Air Flow: 14,000 CFM
MSRP: $73,495
$55,121.25
As low as $1,090.84/mo

  • Heating: BTU/hr @ 55F at 60% RH – 21,240 (nominal 1.8-ton)
  • Cooling: BTU/hr @ 95F at 60% RH – 17,700 (nominal 1.5-ton)
  • Operating cooling temperatures: 60-110F 50% RH
  • Operating heating temperatures: 40-80F 50% RH 
MSRP: $7,145
$5,358.75
As low as $174.15/mo

  • BTU/hr @ 95F at 60% RH: 13,850 (1.1-ton)
  • Operating temperatures: 60-110°F 50% RH
  • Evaporator Air flow: 460 CFM / 3 speed
  • Condenser Air flow: 700 CFM 
MSRP: $4,720
$3,540
As low as $115.05/mo

  • BTU/hr @ 95F at 60% RH: 17,700 (1.5-Ton)
  • Operating temperatures: 60-110°F 50% RH
  • Evaporator Air flow: 600 CFM / 3 speed
  • Inlet water 85F-95F Exit: 4.5 GPM 
MSRP: $5,120
$3,840
As low as $124.80/mo

  • BTU/hr @ 95F at 60% RH: 23,500 (2-Ton)
  • Operating temperatures: 60-110F 50% RH
  • Evaporator Air Flow: 750 CFM / 3 speed
  • Inlet water 85F-95F Exit: 6 GPM 
MSRP: $6,020
$4,515
As low as $146.73/mo

KiwiKool has been manufacturing portable air cooling systems, air quality equipment, and commercial air conditioning since 1997. They are located in Houston, TX. KiwiKool sells all types of different products for indoor and outdoor use, bacteria killing products as well as ceiling mounted units. They produce the highest quality and commercial portable cooling products. 

If you are interested in state of the art air conditioners, highly efficient spot coolers, or a wide range of HVAC filters, please contact us. Elite metal tools offers great pricing and unbeatable customer service for getting you the parts and service that you may need.