Kwikool PHP Series 115V Single Phase Portable Heatpump Combined Heating and Air Conditioning KPHP2211-3

Description

The Model KPHP2211-3 (21,240 or nominal 1.8-ton Heating and 17,700 or nominal 1.5-ton BTU cooling capacities) is the smallest unit possible in size and capacity in The PHP Portable Heatpump Series, Kwikool’s combined heating and air conditioning models. With its full-featured design, high sensible cooling and balanced air system, the KPHP2211-3 is the perfect solution for comfort cooling and heating applications. The PHP Series is quick and easy with its ‘plug and play’ technology and tops the competition in its small size, big performance, and tons of features. From its hi-tech microprocessor controls and self-diagnostics, to the long list of standard features the PHP Series out performs other portables and all at a price that is comparable to other available products. Unlike other heat pump brands, the Kwikool heat pump will operate all the way down to 45 degrees F. 

All PHP Series units come standard with Kwikool’s exclusive I/O Integral Condenser Dual Ducting, which provides isolated and balanced air pressure within the space for maximum cooling efficiency. The KPHP2211-3 runs on a standard 115-volt/20-amp circuit with automatic restart after a power failure. The unit comes with an internal high lift condensate pump and a 5-gallon exterior condensate tank with float activated unit cut off for short term use. 

Features

• 17,700 BTU/H – 1.5-ton capacity Cooling
• 21,240 BTU/H – 1.8-ton capacity Heating
• Compact yet powerful
• Runs on 115V 20 amp circuit
• Operates down to a 45 degree F ambient environment
• Balanced air pressure using separate condenser air input & output
• Superior safety compared to electric heaters
• Standard high pressure condensate pump
• Easy-touch control pads make changing system settings a nap
• Independent evaporator and condenser motors
• Auto restart in the event of power failure
• Heavy-duty locking casters
• Fully insulated, heavy-duty galvanized steel cabinet with Kwikool’s exclusive E-Z Clean™ scratch-resistant attractive two-tone HammerCoat™ epoxy protective finish for optimum durability, efficiency, low maintenance, and quiet operation
• Easy access service door 

Specifications

COOLING & HEATING CAPACITY

• Heating: BTU/hr @ 55F at 60% RH – 21,240 (nominal 1.8-ton)
• Cooling: BTU/hr @ 95F at 60% RH – 17,700 (nominal 1.5-ton) 

COMPRESSOR DATA

• Compressor type: hermetic rotary
• Operating cooling temperatures: 60-110F 50% RH
• Operating heating temperatures: 40-80F 50% RH
• Refrigerant: R-454B

FAN DATA

• EVAPORATOR
  • Fan type (centrifugal): direct drive
  • Air flow: 600 CFM
  • Supply air device: adjustable vent
• CONDENSER
  • I/O integral condenser: balanced air flow
  • Fan type (centrifugal): direct drive
  • Air flow: 950 CFM
  • Condenser duct max length: 25’ 

ELECTRICAL DATA            

• Power supply: 115V Single Phase
• Current consumption: 16 amp Cooling / 15.5 amp Heating
• Power consumption: 1.84 kW
• Max circuit breaker: 30 Amps
• Recommended breaker size: 20
• Min circuit ampacity: 19.975 Amps
• Min/Max voltage: 105-125 volt
• Power cord gauge/length: 12/6’
• Plug configuration: NEMA 5-20 

DIMENSIONAL DATA

• Machine Dims: 20” x 41” x 43”
• Approx Weight: 278 lbs 

SERVICE DEVICE DATA

• Compressor overload: external
• Fan motor overload: automatic internal
• Evaporator freeze protection: hot gas bypass
• High pressure switch: manual
• Low pressure switch: automatic
• Compressor short cycle: yes
• Automatic restart: yes
• Thermostat type: microprocessor/digital
• Condensate pump overflow: yes
• Condensate tank overflow: yes 

Optional Add-Ons

• Flange/Collar (DCR-14”)
• Condensate Tank (TANK15)
• Ceiling Kit (CK-24)
• Chute Kit (KDC-24)