Kalamazoo Industries

  • 1" x 42" Belt Grinder
  • 1/2HP Motor
  • 1Phase/110Volt
  • Made in U.S.A
MSRP: $1,085
$999
As low as $32.46/mo

  • 2" x 72" Belt
  • USA Made
  • Easy Belt Tracking
  • Open area design for easy access
MSRP: $2,150
$2,047
As low as $66.52/mo

  • Capacity: 1.5" solids, 2.5" pipe
  • Optional steel stand
  • Spindle RPM- 3450
  • Cuts hardened material like butter
$1,562
As low as $50.76/mo

  • 8″ x 60″ belt, air tension, 0-50 PSI reqd
  • 7-1/2 HP, 3 PH motor, 220/440/575 , also 50HZ, CE
  • Platen working surface 8″ x 13″
  • Dimensions: L 35″ x W 24″ x H 34″
$9,680
As low as $314.60/mo

  • Dia. contact wheel: 8″
  • Platens: 24″
  • Reversible steel platen: 24-1/2″
  • Mounted on DCV-6 dust collector – 400 CFM
MSRP: $5,395
$5,174
As low as $168.15/mo

  • 7-1/2HP, 3PH motor
  • 8″x60″ belt, replaceable platen, work area 8″ x13″
  • Dimensions: L25″xW25″xH62″
  • 760 lbs
$9,118
As low as $296.33/mo

  • USA Made
  • 3" x 90" Belt
  • Multi-Position Horizontal through Vertical

 

$2,967
As low as $96.42/mo

  • 24 volt at switch, 10 gal coolant tank & pump
  • Air belt tensioning, 0-55 PSI reqd.
  • Dimensions: L 46″ x W 31″ x H 84″
  • 1750 lbs
MSRP: $18,500
$18,107
As low as $358.33/mo

  • Swivel cam vise opens 4″ – fast, lever-lock. Work length stop
  • Capacity: 1 .5″ solids, 2 1/2″ pipe
  • 5/8″ arbor, sealed-for-life bearings,10″ abrasive wheel, 3 HP
  • Available in 1 ph 110/220 or 3 ph 220/440
$1,915
As low as $62.23/mo

  • 12" Disc Sander
  • Vacuum Base Included
  • Table Tilts 45 Degree and up to 90 Degree
  • 1HP Motor
MSRP: $1,870
$1,811
As low as $58.85/mo

  • Capacity: 1200 CFM.
  • Amp draws: 3PH 230 FLA 7.2 amps and 440 FLA 3.6 amps
  • Vacuum dimensions: 24″ x 24″, 40″ High
  • Magnetic on/off switch.
$2,915
As low as $94.73/mo

  • 7-1/2 HP, 3 PH motor, 220/440/575 , also 50HZ, CE
  • Replaceable platen
  • Platen working surface 8″ x 13″
  • Dimensions: L 35″ x W 24″ x H 34″
$8,781
As low as $285.38/mo

  • Stand Not Included
  • 6″ x 60″ belt sander, vertical/ horizontal
  • Steel platen – 6-1/2″ x 17″, 2800 SFPM
  • Constant spring belt tension, FAST 1 lever belt change!!
MSRP: $2,495
$2,396
As low as $77.87/mo

  • 20" Manual Wet-Cut Abrasive Saw 
  • Cast Iron Arm, Trunnions 
  • Integral Tank And Pump 
  • 15 HP Motor
MSRP: $16,350
$15,987
As low as $316.38/mo

  • 10" Disc Sander
  • 4" x 36" Belt Sander
  • 1/2HP 1Phase, 115Volts
  • Made in the U.S.A
$1,326
As low as $43.09/mo

  • 3 hp , 3 phase, 220 or 440 volt
  • 3450 rpm motor w/ 2800 SFPM at belt
  • Cast Iron work table, 6″ x 10″ w/1/2″ x 1/8″ slot
  • Full OSHA guard, heavy duty base
MSRP: $4,550
$4,399
As low as $142.96/mo

  • Miters 45 Degree Left and 60 Degree Right
  • Non-Ferrous Saw
  • Dual Cam-Lock Vises
  • 5/8" Spindle Arbor
$2,591
As low as $84.20/mo

  • 1 Phase 220 volt
  • 6″ x 60″ wet belt sander, vertical/ horizontal
  • Cast iron table with 1/2″ x 1/8″ slot, cast iron frame, Heavy duty base
  • Coolant pump and tank, 10 gal. 1/3 HP
MSRP: $4,650
$4,492
As low as $145.99/mo

  • 3 Phase 220/440 volt
  • Cast iron table with 1/2″ x 1/8″ slot, cast iron frame, Heavy duty base
  • Steel platen – 6-1/2″ x 17″, 2800 SFPM
  • Constant spring belt tension, FAST 1 lever belt change
MSRP: $4,650
$4,492
As low as $145.99/mo

  • Capacity 4" Solid, 6" Shapes 
  • Air Chain Vise 
  • Cast iron Upper Arm/Trunnions 
  • 20 HP Motor
MSRP: $17,550
$17,160
As low as $339.59/mo

  • OSHA safety clamshell wheel guard
  • 1" spindle, sealed ball bearings
  • Two easy-set screw vises to hold work on both sides
  • Options: #12L steel stand and AV-18 air vises
MSRP: $3,400
$3,227
As low as $104.87/mo

  • Comes with stand and chain vise
  • 3450 RPM, 4400 spindle RPM.
  • 5HP TEFC motor,1phase 220v 
  • Made in the USA
$3,085
As low as $100.26/mo

  • 3"x132" Dual Wheel Grinder
  • 10HP 3Phase 220 or 440Volt
  • Made in USA
  • Parts Table Included
MSRP: $19,995
$19,574
As low as $387.36/mo

  • Capacity: 1 .5″ solids, 2 1/2″ pipe
  • 5/8″ arbor, sealed-for-life bearings,10″ abrasive wheel, 3 HP
  • Available in 1 ph 110/220 or 3 ph 220/440
  • Swivel cam vise opens 4″ – fast, lever-lock. Work length stop

 

$1,831
As low as $59.50/mo

Founded in 1883 this company has become a well known brand across the United States with their high quality machines. Kalamazoo Industries is located in Kalamazoo, MI. They strive to give the customers the best machines that are durable and ready to take on any task in the woodworking industries. They sell products such as belt sander, industrial belts, and abrasive saws.

If you are interested in saws or anything else Kalamazoo Industries has to offer, please contact us. At Elite Metal Tools we offer low prices and work together in order to provide you with great customer service.