Kalamazoo Industries

  • 24 volt at switch, 10 gal coolant tank & pump
  • Air belt tensioning, 0-55 PSI reqd.
  • Dimensions: L 46″ x W 31″ x H 84″
  • 1750 lbs
MSRP: $18,500
$18,107
As low as $358.33/mo

  • 7-1/2 HP, 3 PH motor, 220/440/575 , also 50HZ, CE
  • Replaceable platen
  • Platen working surface 8″ x 13″
  • Dimensions: L 35″ x W 24″ x H 34″
$8,781
As low as $285.38/mo

  • Capacity: 1200 CFM.
  • Amp draws: 3PH 230 FLA 7.2 amps and 440 FLA 3.6 amps
  • Vacuum dimensions: 24″ x 24″, 40″ High
  • Magnetic on/off switch.
$2,915
As low as $94.73/mo

  • Stand Not Included
  • 6″ x 60″ belt sander, vertical/ horizontal
  • Steel platen – 6-1/2″ x 17″, 2800 SFPM
  • Constant spring belt tension, FAST 1 lever belt change!!
MSRP: $2,495
$2,396
As low as $77.87/mo

  • 10" Disc Sander
  • 4" x 36" Belt Sander
  • 1/2HP 1Phase, 115Volts
  • Made in the U.S.A
$1,326
As low as $43.09/mo

  • 3 hp , 3 phase, 220 or 440 volt
  • 3450 rpm motor w/ 2800 SFPM at belt
  • Cast Iron work table, 6″ x 10″ w/1/2″ x 1/8″ slot
  • Full OSHA guard, heavy duty base
MSRP: $4,550
$4,399
As low as $142.96/mo

  • 1 Phase 220 volt
  • 6″ x 60″ wet belt sander, vertical/ horizontal
  • Cast iron table with 1/2″ x 1/8″ slot, cast iron frame, Heavy duty base
  • Coolant pump and tank, 10 gal. 1/3 HP
MSRP: $4,650
$4,492
As low as $145.99/mo

  • 3 Phase 220/440 volt
  • Cast iron table with 1/2″ x 1/8″ slot, cast iron frame, Heavy duty base
  • Steel platen – 6-1/2″ x 17″, 2800 SFPM
  • Constant spring belt tension, FAST 1 lever belt change
MSRP: $4,650
$4,492
As low as $145.99/mo

  • 3"x132" Dual Wheel Grinder
  • 10HP 3Phase 220 or 440Volt
  • Made in USA
  • Parts Table Included
MSRP: $19,995
$19,574
As low as $387.36/mo

  • 6" x 90" Belt Grinder
  • USA MADE!
  • 6" x 24" Platen
  • VACUUM IS SOLD SEPARATELY
MSRP: $6,495
$6,038
As low as $196.23/mo

  • 4″ pulley, 3450 RPM, 3600 SFPM, Direct drive
  • Cast iron table 4″ x 6″
  • DCV-6 Vacuum base 400 CFM
  • Dimensions: L 18″ x W 26″ x H 60″
MSRP: $4,195
$4,100
As low as $133.25/mo

  • 20 hp, 3 phase, 220/440/60hz
  • Work surface 14″ x 32″
  • Air belt tensioning, 0-55 PSI reqd.
  • Dimensions: L 46″ x W 31″ x H 84″
$19,129
As low as $378.56/mo

  • Belt sander with heavy-duty enclosed stand and vacuum dust collector
  • 3 hp , 1phase w/ vacuum
  • Reversible steel platen , 6″ x14″,cast iron frame
  • Dimensions: L 27″ x W 18″ x H 52″
MSRP: $4,595
$4,437
As low as $144.20/mo

  • 4″ x 36″ belt sander with dust collector, cord, and switch
  • 1 HP,1 phase 110 volt 3450 RPM
  • Vertical or Horizontal position
  • Dimensions: 50″ high x 12″ deep x 14″ wide
MSRP: $1,840
$1,785
As low as $58.01/mo

  • 3 HP motor 3450 RPM, 1 phase or 3 phase, manual switch, 3500 SFPM
  • 6″ x 60″ belt, variable position, direct drive, 1 lever quick belt release!!!
  • Cast iron work table 6″ x 10″ with 1/2″ x 1/8″ slot
  • Dimensions: L22″ x W14″ x H56″
$2,709
As low as $88.04/mo

  • 4″ x 36″ belt sander with dust collector, cord, and switch
  • 1/2 HP,1 phase 110 volt (1 HP available) 3450 RPM
  • Dimensions: 50″ high x 12″ deep x 14″ wide
  • 3615 SFPM, 120 LBS
$1,625
As low as $52.81/mo

  • Dia. contact wheel: 8″
  • Platens: 24″
  • Reversible steel platen: 24-1/2″
  • Mounted on DCV-6 dust collector – 400 CFM
MSRP: $5,395
$5,174
As low as $168.15/mo

  • 10″ x 90″ sanding belt and will also accept woven conditioning belts for polishing!
  • Large 10″ x 28″ platen work area for sanding large surface areas.  Get parts FLAT!
  • 10 hp motor for great power, no stalling!  Replaceable platen!
  • This unit is designed and MADE IN THE USA SINCE 1960!
$11,815
As low as $383.98/mo

  • Grinder amp draws: 3PH 230V 11.8 amps
  • Dust collector amp draws: 3PH 230V 2.8 amps
  • Belt speed: 6900 SFPM
  • Grinder switch: Magnetic on/off switch
MSRP: $6,395
$6,017
As low as $195.55/mo

  • 4″ x 60″ abrasive belt, direct drive, vertical position
  • Reversible platen 4″ x 17″, work table 4″ x 6″
  • Full OSHA guard, easy belt tracking, quick belt change, pre-set belt tension
  • Dimensions: L14″ x W16″ x H33″
MSRP: $1,995
$1,916
As low as $62.27/mo

  • 10″x90″ belt, 3400 SFPM
  • 10HP, 3phase, TEFC motor. Magnetic controls with jog switch
  • Table Tilt 45 deg. down, 15 deg. up
  • Dimensions: L46″ x W30″ x H35″
$11,178
As low as $363.28/mo

  • Grinder 3PH amps draws: 2.8 amps
  • Vacuum 3PH FLA: 2.8 amps
  • SFPM: 5400
  • 3″ and 1.5″ serrated contact wheels on rotating platen
MSRP: $4,250
$4,079
As low as $132.56/mo

  • 10" Disc Sander
  • Vacuum Included
  • 1/2 HP Motor
  • Made in the USA
$1,389
As low as $45.14/mo

  • 3 hp , 3 phase w/ vacuum
  • Belt sander with heavy-duty enclosed stand and vacuum dust collector
  • Quick one lever abrasive belt changing!
  • Dimensions: L 27″ x W 18″ x H 52"
MSRP: $4,695
$4,529
As low as $147.19/mo

Founded in 1883 this company has become a well known brand across the United States with their high quality machines. Kalamazoo Industries is located in Kalamazoo, MI. They strive to give the customers the best machines that are durable and ready to take on any task in the woodworking industries. They sell products such as belt sander, industrial belts, and abrasive saws.

If you are interested in saws or anything else Kalamazoo Industries has to offer, please contact us. At Elite Metal Tools we offer low prices and work together in order to provide you with great customer service.