Kalamazoo Industries

  • 12" Disc Sander
  • Vacuum Base Included
  • Table Tilts 45 Degree and up to 90 Degree
  • 1HP Motor
MSRP: $1,965
$1,903
As low as $61.84/mo
  • Stand Not Included
  • 6″ x 60″ belt sander, vertical/ horizontal
  • Steel platen – 6-1/2″ x 17″, 2800 SFPM
  • Constant spring belt tension, FAST 1 lever belt change!!
MSRP: $2,625
$2,520
As low as $81.90/mo
  • Dia. contact wheel: 8″
  • Platens: 24″
  • Reversible steel platen: 24-1/2″
  • Mounted on DCV-6 dust collector – 400 CFM
MSRP: $5,600
$5,370
As low as $174.52/mo
  • USA Made
  • 3" x 90" Belt
  • Multi-Position Horizontal through Vertical

 

$3,071
As low as $99.80/mo
  • 3 hp , 3 phase, 220 or 440 volt
  • 3450 rpm motor w/ 2800 SFPM at belt
  • Cast Iron work table, 6″ x 10″ w/1/2″ x 1/8″ slot
  • Full OSHA guard, heavy duty base
MSRP: $4,550
$4,399
As low as $142.96/mo
  • 24 volt at switch, 10 gal coolant tank & pump
  • Air belt tensioning, 0-55 PSI reqd.
  • Dimensions: L 46″ x W 31″ x H 84″
  • 1750 lbs
MSRP: $19,500
$19,085
As low as $377.69/mo
  • 6" x 90" Belt Grinder
  • USA MADE!
  • 6" x 24" Platen
  • VACUUM IS SOLD SEPARATELY
MSRP: $6,800
$6,321
As low as $205.43/mo
  • 20 hp, 3 phase, 220/440/60hz
  • Work surface 14″ x 32″
  • Air belt tensioning, 0-55 PSI reqd.
  • Dimensions: L 46″ x W 31″ x H 84″
$20,600
As low as $407.67/mo
  • 4″ pulley, 3450 RPM, 3600 SFPM, Direct drive
  • Cast iron table 4″ x 6″
  • DCV-6 Vacuum base 400 CFM
  • Dimensions: L 18″ x W 26″ x H 60″
MSRP: $4,350
$4,251
As low as $138.15/mo
  • 7-1/2 HP, 3 PH motor, 220/440/575 , also 50HZ, CE
  • Replaceable platen
  • Platen working surface 8″ x 13″
  • Dimensions: L 35″ x W 24″ x H 34″
$9,235
As low as $300.13/mo
  • 10" Disc Sander
  • 4" x 36" Belt Sander
  • 1/2HP 1Phase, 115Volts
  • Made in the U.S.A
$1,428
As low as $46.41/mo
  • 4″ x 36″ belt sander with dust collector, cord, and switch
  • 1 HP,1 phase 110 volt 3450 RPM
  • Vertical or Horizontal position
  • Dimensions: 50″ high x 12″ deep x 14″ wide
MSRP: $1,840
$1,785
As low as $58.01/mo
  • 3 HP motor 3450 RPM, 1 phase or 3 phase, manual switch, 3500 SFPM
  • 6″ x 60″ belt, variable position, direct drive, 1 lever quick belt release!!!
  • Cast iron work table 6″ x 10″ with 1/2″ x 1/8″ slot
  • Dimensions: L22″ x W14″ x H56″
$2,857
As low as $92.85/mo
  • 4″ x 36″ belt sander with dust collector, cord, and switch
  • 1/2 HP,1 phase 110 volt (1 HP available) 3450 RPM
  • Dimensions: 50″ high x 12″ deep x 14″ wide
  • 3615 SFPM, 120 LBS
$1,625
As low as $52.81/mo
  • 4″ x 60″ abrasive belt, direct drive, vertical position
  • Reversible platen 4″ x 17″, work table 4″ x 6″
  • Full OSHA guard, easy belt tracking, quick belt change, pre-set belt tension
  • Dimensions: L14″ x W16″ x H33″
MSRP: $2,100
$2,016
As low as $65.52/mo
  • 10″ x 90″ sanding belt and will also accept woven conditioning belts for polishing!
  • Large 10″ x 28″ platen work area for sanding large surface areas.  Get parts FLAT!
  • 10 hp motor for great power, no stalling!  Replaceable platen!
  • This unit is designed and MADE IN THE USA SINCE 1960!
$13,356
As low as $434.07/mo
  • 10" Disc Sander
  • Vacuum Included
  • 1/2 HP Motor
  • Made in the USA
$1,470
As low as $47.77/mo
  • Belt sander with heavy-duty enclosed stand and vacuum dust collector
  • 3 hp , 1phase w/ vacuum
  • Reversible steel platen , 6″ x14″,cast iron frame
  • Dimensions: L 27″ x W 18″ x H 52″
MSRP: $3,495
$3,374
As low as $109.65/mo
  • 10″ disc sander with 4″ x 36″ belt sander
  • With full boxed OSHA guard, Horizontal or vertical belt position
  • 1/2 HP 1PH TEFC motor , 115 volts, 1 ph, 7.4 amps, 230 volt, 1 ph, 3.7 amps
  • Factory wired at 115 volt, 1 phase, 8 ft. 3 prong plug standard
$1,449
As low as $47.09/mo
  • 10″x90″ belt, 3400 SFPM
  • 10HP, 3phase, TEFC motor. Magnetic controls with jog switch
  • Table Tilt 45 deg. down, 15 deg. up
  • Dimensions: L46″ x W30″ x H35″
$12,194
As low as $396.30/mo
  • Grinder amp draws: 3PH 230V 11.8 amps
  • Dust collector amp draws: 3PH 230V 2.8 amps
  • Belt speed: 6900 SFPM
  • Grinder switch: Magnetic on/off switch
MSRP: $6,700
$6,303
As low as $204.84/mo
  • Grinder 3PH amps draws: 2.8 amps
  • Vacuum 3PH FLA: 2.8 amps
  • SFPM: 5400
  • 3″ and 1.5″ serrated contact wheels on rotating platen
MSRP: $4,450
$4,270
As low as $138.77/mo
  • Grinder amp draws: 3PH 460V 5.9 amps
  • Dust collector amp draws: 3PH 460V 1.4 amps.
  • Belt speed: 6900 SFPM
  • Grinder switch: Magnetic on/off switch
MSRP: $6,700
$6,303
As low as $204.84/mo
  • Dia. contact wheel: 8″
  • Platens: 24″
  • Reversible steel platen: 24-1/2″
  • Mounted on DCV-6 dust collector – 400 CFM
MSRP: $5,600
$5,370
As low as $174.52/mo

Founded in 1883 this company has become a well known brand across the United States with their high quality machines. Kalamazoo Industries is located in Kalamazoo, MI. They strive to give the customers the best machines that are durable and ready to take on any task in the woodworking industries. They sell products such as belt sander, industrial belts, and abrasive saws.

If you are interested in saws or anything else Kalamazoo Industries has to offer, please contact us. At Elite Metal Tools we offer low prices and work together in order to provide you with great customer service.