JET

Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X, Y-Axis JET Powerfeeds 894361

Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
The mounted control box houses major mill functions as well as an emergency stop button

$38,268.57

$31,149.00

As low as $616/mo

View Details

Jet E-1340VS With ACU-RITE 303 DRO With Taper Attachment 892412

4-Position Carriage Stop
Chuck guards are standard equipment on all ELITE lathes for increased safety
Front facing chip pan allows easy chip removal from the front of the machine
Hardened and ground gears in headstock reduce vibration and deflection
Inverter drive system provides infinitely variable spindle speeds

$31,466.01

$25,325.58

As low as $501/mo

View Details

Jet E-1340VS With Newall DP700 DRO With Taper Attachment and Collet Closer 892422

4-Position Carriage Stop
Chuck guards are standard equipment on all ELITE lathes for increased safety
Front facing chip pan allows easy chip removal from the front of the machine
Hardened and ground gears in headstock reduce vibration and deflection
Inverter drive system provides infinitely variable spindle speeds

$33,633.04

$27,049.38

As low as $535/mo

View Details

Jet E-1440VS With Newall DP700 DRO With Taper Attachment 892470

4-Position Carriage Stop
Chuck guards are standard equipment on all ELITE lathes for increased safety
Front facing chip pan allows easy chip removal from the front of the machine
Hardened and ground gears in headstock reduce vibration and deflection
Inverter drive system provides infinitely variable spindle speeds

$31,594.21

$25,488.78

As low as $504/mo

View Details

Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894362

Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
The mounted control box houses major mill functions as well as an emergency stop button

$41,118.86

$33,469.00

As low as $662/mo

View Details

Jet 10-Ton Hand Chain Hoist with 15' Lift | S90-1000-15 101961

Grade 80 black oxide coated load chain for added durability
Heat Treated Load Plates
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
Needle bearings support the load sheave to increase efficiency and promote smooth operation

$3,094.00

$1,977.78

As low as $64/mo

View Details

Jet JLH-300-15PSH 3 Ton Lever Hoist, 15' Lift with Overload Protection & Shipyard Hooks 376902

All steel construction
Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
Enhanced ergonomic grip allows for greater operator control and increased comfort
Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
Heat Treated Load Plates

$1,437.00

$946.99

As low as $30/mo

View Details

Jet JET — 16-Piece CS-5C Collet Set for Lathes and Grinders 650014

5-C Collet Set
Precision ground components
1/8" - 1-/16" by 1/16" increments
Does not include rack or case

$283.99

$259.00

View Details

Jet JET — Replacement Circular Saw Blade, Carbide Nonferrous, 350 x 3.4 x 32mm x 84T for JCK350-2/4K 579062

All carbide blades are three tooth precision tungsten carbide cutting style blades
Carbide Tipped Cold Saw Blades for Non-ferrous Materials
Replacement Blade for JET CK350 350mm x 3.4mm x 32mm x 84T Carbide Non Ferrous
The 108 and 120 teeth blades are for use on small size solids and tubing and small size extrusions
60 and 72 teeth blades are for use on large size solids and extrusions

$737.45

$645.00

As low as $20/mo

View Details

Jet JET — DA Aloris Set for 26 in ZX Lathes 650290

Advanced design provides built-in quick tool changing, versatility with positive rigidity to meet the most exacting working tolerances.
Includes super precision tool post, #1 and #2 tool holders

$2,394.29

$1,949.00

As low as $63/mo

View Details

Jet JTM-1254RVS with ACU-RITE 203 3X (K) DRO, X Powerfeed & Air Power Drawbar 698115

Adjustable gibs throughout
Dual locks on all moveable surfaces
Heavy-duty spindle brake
Precision bored and honed milling head
Precision hardened and ground ways and table

$32,187.14

$26,199.00

As low as $518/mo

View Details

Jet JTM-1254RVS with ACU-RITE 203 3X (K) DRO, X & Y Powerfeeds & Air Power Drawbar 698117

Adjustable gibs throughout
Dual locks on all moveable surfaces
Heavy-duty spindle brake
Precision bored and honed milling head
Precision hardened and ground ways and table

$33,710.57

$27,439.00

As low as $543/mo

View Details

Jet JLH-50-5, 1/2-Ton Compact Lever Hoist With 5' Lift 181505

Alloy Steel Hooks- Industrial rated hooks rotate 360 degrees for easy rigging. Hooks slowly stretch to indicate an overload situation increasing jobsite safety
Cast steel safety latches
Compact design with smaller body and lightweight design for low headroom applications and use in confined areas
Grade 100 Load Chain- Corrosive resistant grade 100 load chain is stronger than grade 80 load chain extending the life of the hoist
Heat Treated Load Plates

$411.00

$259.08

View Details

Jet 1/2-Ton Hand Chain Hoist with 20' Lift & Overload Protection | L-100-50WO-20 205120

Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
Heat Treated Load Plates
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist

$682.00

$465.00

View Details

Jet JLP-300A-20SH, 3 Ton Lever Hoist, 20' Lift & Shipyard Hooks 287803

All steel construction
Impact resistant all steel construction for added durability and protection
Needle bearings support the load sheave to increase efficiency and promote smooth operation
JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
NEW! Redesigned ergonomic grip allows for greater operator control and increased comfort

$958.00

$626.99

As low as $20/mo

View Details

Jet JTM-949EVS Mill With Acu-Rite 203 DRO With X-Axis Powerfeed and Air Powered Drawbar 690521

Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
Dual locks on all moveable surfaces
Spindle head is internally cooled extending bearing, belt and motor life
Swing away control box houses an e-stop and puts all controls at the operators fingertips

$28,320.00

$22,899.00

As low as $453/mo

View Details

Jet 1-1/2-Ton Hand Chain Hoist with 10' Lift | S90-150-10 101920

Grade 80 black oxide coated load chain for added durability
Heat Treated Load Plates
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
Needle bearings support the load sheave to increase efficiency and promote smooth operation

$474.00

$300.90

View Details

Jet JTM-1 Mill With Newall DP700 DRO With X and Y-Axis Powerfeeds 691189

Heavy duty splined motor drive
Internal coolant tank built into base for use with coolant system (Coolant pump not included)
Large Diameter quill is chromed
One shot lubrication system
Precision bored and honed milling head

$20,724.29

$16,729.00

As low as $331/mo

View Details

Jet JLH-150WO-10, 1-1/2 Ton, Lever Hoist with 10' Lift with Overload Protection 376301

All steel construction
Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
Enhanced ergonomic grip allows for greater operator control and increased comfort
Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
Heat Treated Load Plates

$814.00

$532.44

As low as $17/mo

View Details

Jet JLH-300WO-20 3 Ton Lever Hoist, 20' Lift with Overload Protection 376503

All steel construction
Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
Enhanced ergonomic grip allows for greater operator control and increased comfort
Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
Heat Treated Load Plates

$1,501.00

$985.99

As low as $32/mo

View Details

Jet GH-1880ZX With ACU-RITE 303 DRO With Taper Attachment 321597

Articulating LED work lamp
Centrally located controls with jog button
Electronic Chuck Key Holder
Five position automatic carriage stop increases productivity
Full length splash guard and coolant return

$51,950.00

$42,999.00

As low as $850/mo

View Details

Jet GH-2280ZX With ACU-RITE 303 DRO 321610

Articulating LED work lamp
Centrally located controls with jog button
Electronic Chuck Key Holder
Five position automatic carriage stop increases productivity
Full length splash guard and coolant return

$48,894.29

$39,899.00

As low as $789/mo

View Details

Jet GH-2280ZX With ACU-RITE 203 DRO 321879

Articulating LED work lamp
Centrally located controls with jog button
Electronic Chuck Key Holder
Five position automatic carriage stop increases productivity
Full length splash guard and coolant return

$47,215.71

$38,669.00

As low as $765/mo

View Details

Jet GH-1440ZX With ACU-RITE 303 DRO With Taper Attachment 321303

Articulating LED work lamp
Centrally located controls with jog button
Electronic Chuck Key Holder
Five position automatic carriage stop increases productivity
Full length splash guard and coolant return

$44,085.71

$35,999.00

As low as $712/mo

View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.