JET

  • Layout
Jet JMD-45GH Geared Head Square Column Mill/Drill 351045 at Elite Metal Tools
Jet JMD-45GH Geared Head Square Column Mill/Drill 351045
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $8,611.20
$6,949
As low as $225.84/mo
View Details
Jet 7" x 12" Variable Speed Horizontal / Vertical Bandsaw Deluxe | HVBS712D 415560 at Elite Metal Tools
Jet 7" x 12" Variable Speed Horizontal / Vertical Bandsaw Deluxe | HVBS712D 415560
  • Adjustable toolless material stop
  • Four 8" Rubber Wheels for Ease of Movement
  • Heavy Casted Iron Bow and Bed
  • Hydraulic downfeed for ease of cut
  • Improved Wider Stand with Built-in Storage Cabinet and Chip Tray
MSRP: $2,900.93
$2,389
As low as $77.64/mo
View Details
Jet JVM-836-1 Step Pulley Milling Machine 115V 1Ph 690036 at Elite Metal Tools
Jet JVM-836-1 Step Pulley Milling Machine 115V 1Ph 690036
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $11,514.29
$9,299
As low as $302.21/mo
View Details
Jet JG-300A, 3 Ton Grip Puller with Cable 286530K at Elite Metal Tools
Jet JG-300A, 3 Ton Grip Puller with Cable 286530K
  • Double sealed ratchet brake system increases safety on the jobsite
  • Available in 3/4, 1-1/2 and 3-Ton pulling capacities
  • Designed to lift, lower, stretch, or pull heavy loads
  • Double Sealed Ratchet Brake System
  • Lightweight zinc coated steel is used to resist corrosion
MSRP: $1,384
$883
As low as $28.69/mo
View Details
Jet JCDC-2 Cyclone Dust Collector, 2HP, 230V 717520 at Elite Metal Tools
Jet JCDC-2 Cyclone Dust Collector, 2HP, 230V 717520
  • Direct mounted filter eliminates inefficiencies from ridged flex hosing and bends
  • Double paddle manual cleaning system quickly cleans the pleated filter
  • Fine dust particles are filtered through pleated material that captures even the smallest particles down to 1 micron and below
  • Heavy debris is captured in a 30 gallon drum with quick release levers and independent casters for quick emptying
  • Heavy debris is pulled down to collection drum before debris stream reaches the filter, providing constant suction
MSRP: $2,579.99
$2,099.99
As low as $68.24/mo
View Details
Jet JPM-13CS, 13" Closed Stand Planer / Molder, 1-1/2HP, 1Ph, 115/230V 708524 at Elite Metal Tools
Jet JPM-13CS, 13" Closed Stand Planer / Molder, 1-1/2HP, 1Ph, 115/230V 708524
  • Exclusive angled 4" dust port keeps the dust hose out of the way while providing efficient chip and dust removal
  • Four precision-ground column design feature adds stability when raising and lowering the table
  • Infeed and outfeed rollers are adjustable and rubber-coated to support your workpiece without marring the wood
  • Molding cutter head accommodates over 40 standard molding cutter sets; most 2" or smaller heads can be installed without removing the planning knives to save you set-up time
  • Top-mounted height adjustment handle is easy to use for quick table height changes
MSRP: $2,088.56
$1,699.99
As low as $55.24/mo
View Details
Jet JDP-20EVST-460, 1-1/2" Drilling Capacity, 2HP, 460V, 3Ph with Forward and Reverse Tapping capability 354226 at Elite Metal Tools
Jet JDP-20EVST-460, 1-1/2" Drilling Capacity, 2HP, 460V, 3Ph with Forward and Reverse Tapping capability 354226
  • CSA Coolant System
  • Front Mounted LED Spindle RPM Readout
  • Front mounted positive control depth stop
  • Heavy-duty steel column for increased precision and rigidity
  • High torque at all speeds both forward and reverse
MSRP: $8,071.43
$6,549
As low as $212.84/mo
View Details
Jet JCDC-1.5 Cyclone Dust Collector, 1.5HP, 115V 717515 at Elite Metal Tools
Jet JCDC-1.5 Cyclone Dust Collector, 1.5HP, 115V 717515
  • Direct mounted filter eliminates inefficiencies from ridged flex hosing and bends
  • Double paddle manual cleaning system quickly cleans the pleated filter
  • Fine dust particles are filtered through pleated material that captures even the smallest particles down to 1 micron and below
  • Heavy debris is captured in 20 gallon drum with quick release levers and independent casters for quick emptying
  • Heavy debris is pulled down to collection drum before debris stream reaches the filter, providing constant suction
MSRP: $1,965.70
$1,599.99
As low as $51.99/mo
View Details
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 303 DRO (Knee) With X, Y and Z-Axis Powerfeeds and Air Powered Draw Bar 690680 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 303 DRO (Knee) With X, Y and Z-Axis Powerfeeds and Air Powered Draw Bar 690680
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $34,425.67
$27,799
As low as $550.14/mo
View Details
Jet JWBS-15-3, 15" Bandsaw, 3HP, 230V 714650 at Elite Metal Tools
Jet JWBS-15-3, 15" Bandsaw, 3HP, 230V 714650
  • Blade tracking window provides clear view of blade during tracking
  • Cast iron handwheels and ergonomic-designed knobs make adjustments smooth and easy
  • Cast iron trunnion for maximum support and stability
  • Conveniently located dual 4" dust collection ports catch dust and chips at the source
  • Easy-to-read blade tension scale can be viewed through upper door window
MSRP: $3,132.84
$2,549.99
As low as $82.87/mo
View Details
Jet JVM-836-3 Step Pulley Milling Machine 230V 3Ph 690038 at Elite Metal Tools
Jet JVM-836-3 Step Pulley Milling Machine 230V 3Ph 690038
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $11,514.29
$9,299
As low as $302.21/mo
View Details
Jet JWB-10, 10" Open Stand Bandsaw 714000 at Elite Metal Tools
Jet JWB-10, 10" Open Stand Bandsaw 714000
  • Aluminum extruded fence ensures smooth sliding action
  • Blade site window to view blade tracking
  • Dust port accepts multiple size hoses
  • Extra large cast iron table with retractable extension wing provides additional work piece support
  • Magnifying cursor enlarges measurement scale for precise fence location
MSRP: $737.13
$651
As low as $21.15/mo
View Details
Jet Geared Head Drill Press with Power Downfeed, 2HP, 3Ph, 230V | JDP20EVST-230-PDF 354245 at Elite Metal Tools
Jet Geared Head Drill Press with Power Downfeed, 2HP, 3Ph, 230V | JDP20EVST-230-PDF 354245
  • CSA Coolant System
  • Front Mounted LED Spindle RPM Readout
  • Front mounted positive control depth stop
  • Heavy-duty steel column for increased precision and rigidity
  • High torque at all speeds both forward and reverse
MSRP: $9,745.71
$7,859
As low as $255.41/mo
View Details
Jet JJ-6HHDX, 6" Long Bed Wood Jointer with Helical Head Kit 708466DXK at Elite Metal Tools
Jet JJ-6HHDX, 6" Long Bed Wood Jointer with Helical Head Kit 708466DXK
  • Built-in dust chute with 4" port connects to your collection system for efficient dust/chip disposal
  • Center fence controls are conveniently mounted to allow quick adjustments
  • Exclusive front-mounted table adjustment handwheels make quick, easy, and accurate corrections
  • Extra-long heavy-duty cast iron infeed and outfeed tables with precision machined finish
  • Heavy-duty cast iron infeed and outfeed tables with precision machined finish
MSRP: $2,334.27
$1,899.99
As low as $61.74/mo
View Details
Jet J-8201VS, 14" Metal/Wood Vertical Variable Speed Bandsaw 414502 at Elite Metal Tools
Jet J-8201VS, 14" Metal/Wood Vertical Variable Speed Bandsaw 414502
  • 14 TPI metal cutting blade included
  • 6 TPI wood cutting blade included
  • Adjustable table
  • Conveniently located on/off switch
  • Gear box design allows wood/metal model saws to be used for a wider variety of metal, wood, non-ferrous metal and plastic cutting applications
MSRP: $3,414.29
$2,799
As low as $90.96/mo
View Details
Jet JTM-4VS Mill With X-Axis Powerfeed 690183 at Elite Metal Tools
Jet JTM-4VS Mill With X-Axis Powerfeed 690183
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $17,717.05
$14,355.99
As low as $466.56/mo
View Details
Jet HVBS-56 5" x 6" Horizontal/Vertical Bandsaw 414458 at Elite Metal Tools
Jet HVBS-56 5" x 6" Horizontal/Vertical Bandsaw 414458
  • Adjustable Material Stop
  • Ball bearing supported blade wheel
  • Fully adjustable ball bearing blade guides
  • Handle and wheels for easy movement
  • Heavy-Duty 14-gauge steel stand with shelf has been redesigned for stability, rigidity and ease of use.
MSRP: $971.43
$845
As low as $27.46/mo
View Details
Jet VBS-3612, 36" Vertical Bandsaw 414470 at Elite Metal Tools
Jet VBS-3612, 36" Vertical Bandsaw 414470
  • 1/4" x 14/18VT Bi-metal blade
  • Bi-Metal blade welder, grinder, and cutter
  • Blade and tire cleaning brush
  • Blade welder, grinder, and cutter
  • Easy to read blade tension indicator
MSRP: $20,461.43
$16,629
As low as $329.08/mo
View Details
Jet 8" x 12" Horizontal/Vertical Geared Head Bandsaw | HBS-812G 413460 at Elite Metal Tools
Jet 8" x 12" Horizontal/Vertical Geared Head Bandsaw | HBS-812G 413460
  • Adjustable Material Stop
  • Built-in, self-propelled blade brush extends blade life
  • Hardened and ground worm gear
  • Heavy-duty cast iron saw bow and head
  • Heavy-duty geared head transmission for quick speed changes
MSRP: $3,270
$2,649
As low as $86.09/mo
View Details
Jet 5-HDT, 5-Ton Manual Trolley 262050 at Elite Metal Tools
Jet 5-HDT, 5-Ton Manual Trolley 262050
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened steel wheels and double sealed lubricated ball bearings provide smooth movement
  • Welded all-steel frame and powder coat finish provide maximum durability and protection
MSRP: $960
$617.10
As low as $20.05/mo
View Details
Jet The JPS-10 1.75 HP 115V 52" Proshop Tablesaw with Cast wings 725001K at Elite Metal Tools
Jet The JPS-10 1.75 HP 115V 52" Proshop Tablesaw with Cast wings 725001K
  • Convenient, magnetic paddle switch for the safest operation possible
  • CSA Certified
  • Improved dust shroud around blade for greater dust collection
  • Innovative single belt design for easier belt tensioning and reduced vibration
  • Low profile riving knife included
MSRP: $2,702.84
$2,199.99
As low as $71.49/mo
View Details
Jet HVBS-10-DMWC 10” Horizontal/Vertical Dual Mitering Portable Band Saw with Coolant System, 1HP, 115V, 1 Ph 424465 at Elite Metal Tools
Jet HVBS-10-DMWC 10” Horizontal/Vertical Dual Mitering Portable Band Saw with Coolant System, 1HP, 115V, 1 Ph 424465
  • Adjustable vise
  • Automatic shut off switch stops the sawing process
  • Blade is fully guarded for Operator safety
  • Built-in, self-propelled blade brush prevents chip build up in blade guides
  • Head is pressure controlled by a hydraulic cylinder
MSRP: $5,928.57
$4,799
As low as $155.96/mo
View Details
Jet MT500, 5 Ton Two Speed Electric Trolley 3-Phase 230V 140190 at Elite Metal Tools
Jet MT500, 5 Ton Two Speed Electric Trolley 3-Phase 230V 140190
  • Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
  • TAA Approved
  • Two speeds reduces bump firing to while still allowing high speed movement of materials
  • Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
  • Expanded flange capacity kits are available
MSRP: $4,723
$2,701.99
As low as $87.81/mo
View Details
Jet "The JPS-10 1.75 HP 115V 30"" Proshop Tablesaw Cast wings" 725000K at Elite Metal Tools
Jet "The JPS-10 1.75 HP 115V 30"" Proshop Tablesaw Cast wings" 725000K
  • Convenient, magnetic paddle switch for the safest operation possible
  • CSA Certified
  • Improved dust shroud around blade for greater dust collection
  • Innovative single belt design for easier belt tensioning and reduced vibration
  • Low profile riving knife included
MSRP: $2,457.13
$1,999.99
As low as $64.99/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.