JET

  • Layout
Jet Floor Stand (with Switch and Miter Gauge 737004 at Elite Metal Tools
Jet Floor Stand (with Switch and Miter Gauge 737004
  • Floor Stand includes the power switch and miter gauge
  • Included miter gauge results in more accurate cuts at a variety of angles
  • Integrated mobile base allows for maximum mobility.
  • On board tool storage for increased efficiency when routing
  • Power Switch allows for power to be controlled away from the router
MSRP: $455.79
$445
View Details
Jet JVM-836-3 Mill With Newall DP700 DRO With X and Y-Axis Powerfeeds 691183 at Elite Metal Tools
Jet JVM-836-3 Mill With Newall DP700 DRO With X and Y-Axis Powerfeeds 691183
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $17,340
$14,259
As low as $463.41/mo
View Details
Jet JMD-40GHPF Geared Head Mill/Drill with Power Downfeed & Newall DP700 2-Axis DRO 351142 at Elite Metal Tools
Jet JMD-40GHPF Geared Head Mill/Drill with Power Downfeed & Newall DP700 2-Axis DRO 351142
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $11,074.29
$8,899
As low as $289.21/mo
View Details
Jet 5-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS500-460-010 144013 at Elite Metal Tools
Jet 5-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS500-460-010 144013
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $15,794
$9,905
As low as $321.91/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894318 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894318
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $39,534
$32,179
As low as $636.82/mo
View Details
Jet E-1440VS With ACU-RITE 303 DRO 892461 at Elite Metal Tools
Jet E-1440VS With ACU-RITE 303 DRO 892461
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $29,285.07
$23,805.78
As low as $471.11/mo
View Details
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X,Y and Z-Axis Powerfeeds 690141 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X,Y and Z-Axis Powerfeeds 690141
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $24,668.57
$19,899
As low as $393.80/mo
View Details
Jet JLH-300-5PSH 3 Ton Lever Hoist, 5' Lift with Overload Protection & Shipyard Hooks 376900 at Elite Metal Tools
Jet JLH-300-5PSH 3 Ton Lever Hoist, 5' Lift with Overload Protection & Shipyard Hooks 376900
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $1,255
$820.99
As low as $26.68/mo
View Details
Jet JTM-1050VS2 Mill With 3-Axis ACU-RITE 203 DRO (Quill) and X-Axis Powerfeed 690158 at Elite Metal Tools
Jet JTM-1050VS2 Mill With 3-Axis ACU-RITE 203 DRO (Quill) and X-Axis Powerfeed 690158
  • Adjustable gibs throughout
  • Chrome lead screws on X and Y axis
  • Chrome-plated motor shaft with bearing support at end
  • Hardened and ground square vertical knee ways and cross ways
  • Heavy duty motor drive
MSRP: $24,000
$19,499
As low as $385.88/mo
View Details
Jet PBC-410AEH, VFD 4-Button Control Pendant 10' Cord 162410 at Elite Metal Tools
Jet PBC-410AEH, VFD 4-Button Control Pendant 10' Cord 162410
  • 10' Power cord length to match an electric hoist with 10' lift
  • 4-button controller for electric hoist and trolley with 4-pin quick-connect plug
  • Push button controller with cable strain relief system for durability and reliability
  • Compatible with VOLT Series Hoist and Trolley combinations
  • Backed by our industry leading 2-Year Warranty
MSRP: $237
$169
View Details
Jet GH-1440-3 with DP700 DRO 323411 at Elite Metal Tools
Jet GH-1440-3 with DP700 DRO 323411
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $25,393.99
$20,879
As low as $413.19/mo
View Details
Jet 1-Ton Hand Chain Hoist with 10' Lift & Overload Protection | L-100-100WO-10 102100 at Elite Metal Tools
Jet 1-Ton Hand Chain Hoist with 10' Lift & Overload Protection | L-100-100WO-10 102100
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $552
$400
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 203(Quill) DRO and X, Y-Axis JET Powerfeeds 894319 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 203(Quill) DRO and X, Y-Axis JET Powerfeeds 894319
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $37,900
$30,849
As low as $610.50/mo
View Details
Jet GHB-1340A With Newall DP700 DRO With Taper Attachment 321115 at Elite Metal Tools
Jet GHB-1340A With Newall DP700 DRO With Taper Attachment 321115
  • 6" 3-jaw direct mount chuck with top reversing jaw
  • Compound and cross slide have backlash elimination
  • Gear box gives wide inch threading and feed capabilities with no gear changes
  • Hardened and ground gears are featured in the headstock and gearbox
  • Image shown with optional bench, p/n 321443AK
MSRP: $18,715.71
$15,229
As low as $301.38/mo
View Details
Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO and Servo X, Y, Z-Axis Powerfeeds and USA Air Powered Draw Bar 894428 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO and Servo X, Y, Z-Axis Powerfeeds and USA Air Powered Draw Bar 894428
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $45,111.71
$36,719
As low as $726.66/mo
View Details
Jet JET — Y-Axis Table Powerfeed 350195 at Elite Metal Tools
Jet JET — Y-Axis Table Powerfeed 350195
  • 10.5L x 6.9W x 14.56 inH
  • Adjustable stops allow automatic shut off
  • Built-in clutch helps prevent damage in overload
  • Includes rapid traverse button
  • Factory installation is available
MSRP: $1,081.43
$931
As low as $30.25/mo
View Details
Jet ETM-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894122 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894122
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $38,403.71
$31,259
As low as $618.61/mo
View Details
Jet JTM-4VS Mill With ACU-RITE 203 DRO With X-Axis Powerfeed 690107 at Elite Metal Tools
Jet JTM-4VS Mill With ACU-RITE 203 DRO With X-Axis Powerfeed 690107
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $20,778.57
$16,799
As low as $332.45/mo
View Details
Jet 3-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS300-460-015 144011 at Elite Metal Tools
Jet 3-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS300-460-015 144011
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $12,732
$7,985
As low as $259.51/mo
View Details
Jet 1-Ton Hand Chain Hoist with 20' Lift | S90-100-20 101912 at Elite Metal Tools
Jet 1-Ton Hand Chain Hoist with 20' Lift | S90-100-20 101912
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $414
$264.18
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894339 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Quill) DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894339
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $40,541.43
$32,999
As low as $653.05/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds 894321 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO and X, Y, Z-Axis JET Powerfeeds 894321
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $39,534
$32,179
As low as $636.82/mo
View Details
Jet JCT-1603, Floor Sand Rammer / Backfill Tamper 550603 at Elite Metal Tools
Jet JCT-1603, Floor Sand Rammer / Backfill Tamper 550603
  • All Steel cylinder housing for increased durability
  • Heavy-Duty, industry proven valve design
  • Highly efficient way to quickly compact backfill and sand
  • Maximum power with slow, powerful blows for compacting large sand molds
  • Backed by the industry leading 2-Year Warranty
MSRP: $1,060
$725.99
As low as $23.59/mo
View Details
Jet JAT-450, 4" Angle Grinder 505450 at Elite Metal Tools
Jet JAT-450, 4" Angle Grinder 505450
  • Ergonomically Designed Grip
  • Grinding wheel not included
  • Lightweight composite handle
  • Precision spiral bevel gears transfer torque and speed to spindle for added durability
  • Rugged, ball-bearing design for durability
MSRP: $482
$328.99
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.