Category
Country of Origin

JET

Jet JVM-836-1 Mill With ACU-RITE 203 DRO 690177 at Elite Metal Tools
Jet JVM-836-1 Mill With ACU-RITE 203 DRO 690177
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $20,271.45
$15,665
As low as $310.01/mo
View Details
Jet 1/2-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS050-020 104024 at Elite Metal Tools
Jet 1/2-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS050-020 104024
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs
MSRP: $7,791.29
$4,410
As low as $143.32/mo
View Details
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X-Axis JET Powerfeed 894352 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis Newall DP700 DRO and X-Axis JET Powerfeed 894352
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $40,272.53
$31,436
As low as $622.11/mo
View Details
Jet JET — 35-Piece Premium 5C Collet Set with Rack 650016 at Elite Metal Tools
Jet JET — 35-Piece Premium 5C Collet Set with Rack 650016
  • 35 collets
  • 1/16 to 1-1/8 by 16ths
  • Metal rack
  • Precision ground components
MSRP: $891.87
$819
As low as $26.61/mo
View Details
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 203 DRO (Quill) With X and Y-Axis Powerfeeds and Air Powered Draw Bar 690632 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Acu-Rite 203 DRO (Quill) With X and Y-Axis Powerfeeds and Air Powered Draw Bar 690632
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $35,542.53
$28,015
As low as $554.41/mo
View Details
Jet JET — 52 Piece CK12 Clamping Kit for 5/8 in T-Slots 660012 at Elite Metal Tools
Jet JET — 52 Piece CK12 Clamping Kit for 5/8 in T-Slots 660012
  • 58-pc Clamping Kit with Tray for 5/8" T-slot
  • Storage tray can be wall-mounted or machine-mounted
  • Three complete sets to choose from
  • Twenty four studs, four each
  • Includes 6 T-slot nuts, 6 flange nuts, 4 coupling nuts, 6 step blocks, 6 step clamps, 24 studs (4 ea: 3, 4, 5, 6, 7 and 8 in lengths)
MSRP: $247.27
$236
View Details
Jet TS100-230-010,1-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT100 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 140236K at Elite Metal Tools
Jet TS100-230-010,1-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift, MT100 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 6ft 140236K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $12,888.69
$7,237
As low as $235.20/mo
View Details
Jet JET Open Stand Only for 6" x 48" Belt and 12 " Disc Sander 708566 at Elite Metal Tools
Jet JET Open Stand Only for 6" x 48" Belt and 12 " Disc Sander 708566
  • Compatible with JET 708599 Disc Sander
  • Shop the Jet Parts Store for all your replacement part needs
$401
View Details
Jet JCT-1604, Floor Sand Rammer / Backfill Tamper 550604 at Elite Metal Tools
Jet JCT-1604, Floor Sand Rammer / Backfill Tamper 550604
  • All Steel cylinder housing for increased durability
  • Heavy-Duty, industry proven valve design
  • Highly efficient way to quickly compact backfill and sand
  • Maximum power with slow, powerful blows for compacting large sand molds
  • Backed by the industry leading 2-Year Warranty
MSRP: $1,698.39
$1,060
As low as $34.45/mo
View Details
Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X-Axis JET Powerfeed 894359 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X-Axis JET Powerfeed 894359
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $41,894.26
$32,609
As low as $645.33/mo
View Details
Jet IBDG-436 Combination Industrial 4" x 36" Belt and 9" Disc Grinder 578634 at Elite Metal Tools
Jet IBDG-436 Combination Industrial 4" x 36" Belt and 9" Disc Grinder 578634
  • 9" aluminum disc reduces heat buildup and prolongs abrasive life
  • Cast iron work rests with tool-less adjustments
  • Contact wheel grinding with toolless access
  • Easy-to-use belt tracking.
  • Full guarding of all non-work contact points
MSRP: $1,243.32
$1,094
As low as $35.55/mo
View Details
Jet JTM-1050EVS2/230 Mill With X and Y-Axis Powerfeeds 690603 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With X and Y-Axis Powerfeeds 690603
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $29,731.45
$23,006
As low as $455.28/mo
View Details
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X,Y and Z-Axis Powerfeeds 690141 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Quill) With X,Y and Z-Axis Powerfeeds 690141
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $28,515.07
$22,125
As low as $437.85/mo
View Details
Jet JET — Infeed Roller Table for MBS-1323EVS 413413 at Elite Metal Tools
Jet JET — Infeed Roller Table for MBS-1323EVS 413413
  • Allows operator to push material through with safety and ease
  • Designed with Steel
  • Heavy duty construction providing stability, accuracy and precision to the operation
MSRP: $1,797.39
$1,525
As low as $49.56/mo
View Details
Jet EVS-1440 Electronic Variable Speed lathe with Taper Attachment & Collet Closer,3HP 311443 at Elite Metal Tools
Jet EVS-1440 Electronic Variable Speed lathe with Taper Attachment & Collet Closer,3HP 311443
  • Compound and cross slide have backlash elimination
  • Electronic Chuck Key Docking Station
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Independent lead screw and feed rod
MSRP: $31,893.72
$25,375
As low as $502.17/mo
View Details
Jet JET — Coolant System with Motor and Tray for JTM949EVS and JTM1050EVS Mills 660125 at Elite Metal Tools
Jet JET — Coolant System with Motor and Tray for JTM949EVS and JTM1050EVS Mills 660125
MSRP: $860.85
$799
As low as $25.96/mo
View Details
Jet JET — RF Remote Control for Dust Collector, 115V 708636C at Elite Metal Tools
Jet JET — RF Remote Control for Dust Collector, 115V 708636C
  • Complete unit
  • Simply plug in your dust collector to the transmitter for instant remote control, no wiring needed
  • Works with all Dust Collection units 1-3/4 HP and smaller (115V ONLY)
$170
View Details
Jet E-1440VS With ACU-RITE 303 CSS DRO 892465 at Elite Metal Tools
Jet E-1440VS With ACU-RITE 303 CSS DRO 892465
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $35,001.99
$27,624
As low as $546.67/mo
View Details
Jet ETM-949 Mill with Z-Axis JET Powerfeed 894102 at Elite Metal Tools
Jet ETM-949 Mill with Z-Axis JET Powerfeed 894102
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $32,569.45
$25,864
As low as $511.84/mo
View Details
Jet JET — Infeed/Outfeed Tables for JET JWDS1632/1836 Sanders 723521 at Elite Metal Tools
Jet JET — Infeed/Outfeed Tables for JET JWDS1632/1836 Sanders 723521
  • Extends table surface to 40"
  • Includes both tables and all needed hardware
  • Each table measures 18 x 10-1/4 in
  • Steel
  • Installation hardware included
$225
View Details
Jet 5-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS500-230-020 140129 at Elite Metal Tools
Jet 5-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS500-230-020 140129
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $19,857.19
$10,975
As low as $356.68/mo
View Details
Jet EVS-1440 Electronic Variable Speed lathe with Acu-Rite 203 DRO,3HP 311444 at Elite Metal Tools
Jet EVS-1440 Electronic Variable Speed lathe with Acu-Rite 203 DRO,3HP 311444
  • Compound and cross slide have backlash elimination
  • Electronic Chuck Key Docking Station
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Independent lead screw and feed rod
MSRP: $31,353.07
$24,980
As low as $494.35/mo
View Details
Jet JTM-949EVS/230 Mill With X-Axis Powerfeed 690501 at Elite Metal Tools
Jet JTM-949EVS/230 Mill With X-Axis Powerfeed 690501
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $26,758.26
$20,825
As low as $412.12/mo
View Details
Jet 3-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS300-230-20 140118 at Elite Metal Tools
Jet 3-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS300-230-20 140118
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $16,641.89
$9,310
As low as $302.57/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.