Category
Country of Origin

JET

Jet JTM-1 Mill With Newall DP700 DRO 691187 at Elite Metal Tools
Jet JTM-1 Mill With Newall DP700 DRO 691187
  • Heavy duty splined motor drive
  • Internal coolant tank built into base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
  • Precision bored and honed milling head
MSRP: $21,082.26
$16,255
As low as $321.68/mo
View Details
Jet JTM-4VS Mill With ACU-RITE 203 DRO With X and Y-Axis Powerfeeds 690098 at Elite Metal Tools
Jet JTM-4VS Mill With ACU-RITE 203 DRO With X and Y-Axis Powerfeeds 690098
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $26,217.72
$20,460
As low as $404.90/mo
View Details
Jet 10-Ton Hand Chain Hoist with 10' Lift & Overload Protection | L-100 1000WO-10 108100 at Elite Metal Tools
Jet 10-Ton Hand Chain Hoist with 10' Lift & Overload Protection | L-100 1000WO-10 108100
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $4,996.19
$2,880
As low as $93.60/mo
View Details
Jet JET — Collet Closer 5C for GHB Series Lathes 321514A at Elite Metal Tools
Jet JET — Collet Closer 5C for GHB Series Lathes 321514A
  • Precision ground components
  • Rear mounted lever action
  • Specially designed for each model
  • Uses 5C collets
MSRP: $5,135.45
$4,168
As low as $135.46/mo
View Details
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X, Y and Z-Axis Powerfeeds 690418 at Elite Metal Tools
Jet JTM-4VS Mill With 3-Axis ACU-RITE 203 DRO (Knee) With X, Y and Z-Axis Powerfeeds 690418
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $28,920.53
$22,395
As low as $443.19/mo
View Details
Jet JET — Replacement Bimetal Band Saw Blade, 1" X .035" X 128-1/2" (4/6T) for EHB-916V 891095 at Elite Metal Tools
Jet JET — Replacement Bimetal Band Saw Blade, 1" X .035" X 128-1/2" (4/6T) for EHB-916V 891095
  • Bimetal
  • 4/6T
  • 1" X .035" X 128-1/2"
MSRP: $245.95
$237
View Details
On Sale
Jet GH-1440-1 Lathe with Newall NMS300 DRO and Collet Closer 323387 at Elite Metal Tools
Jet GH-1440-1 Lathe with Newall NMS300 DRO and Collet Closer 323387
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $40,137.45
$31,325
As low as $619.92/mo
View Details
Jet JET — Heat Resistant Dust Collection Hose, 2 in dia x 8 ft length, max 130 degrees 414730 at Elite Metal Tools
Jet JET — Heat Resistant Dust Collection Hose, 2 in dia x 8 ft length, max 130 degrees 414730
  • Flexible
  • For temperatures up to 130 degrees F
  • 8 ft length
  • Hose dia 2 in.
$405
View Details
Jet JTJ-5ST, 5 Ton Hydraulic Toe Jack 454505 at Elite Metal Tools
Jet JTJ-5ST, 5 Ton Hydraulic Toe Jack 454505
  • Complies with ANSI/ASME B30.1 standards
  • Dual purpose jack designed for low or high clearances increases versatility
  • Electric welded bases and cylinders virtually eliminating leaks for proven reliability
  • Heat treated piston resists corrosion
  • Lifting, pushing, spreading, bending, pressing or straightening capabilities for multi-function use
MSRP: $991.09
$655
As low as $21.28/mo
View Details
Jet Bi-Metal Bandsaw Blade 1/4" x 0.025 x 185-1/2" (14/18VT) For EVBS-26 891190 at Elite Metal Tools
Jet Bi-Metal Bandsaw Blade 1/4" x 0.025 x 185-1/2" (14/18VT) For EVBS-26 891190
MSRP: $233.74
$225
View Details
Jet E-1236VS With ACU-RITE 203 DRO With Collet Closer 892305 at Elite Metal Tools
Jet E-1236VS With ACU-RITE 203 DRO With Collet Closer 892305
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $31,082.80
$24,789
As low as $490.57/mo
View Details
Jet 8" 4-Jaw Chuck D1-4 For Elite EVS Lathes 892058 at Elite Metal Tools
Jet 8" 4-Jaw Chuck D1-4 For Elite EVS Lathes 892058
  • 4 independent one-piece jaws
  • Cast iron construction
  • Specifically designed for Elite EVS Lathes
MSRP: $1,756.80
$1,482
As low as $48.16/mo
View Details
Jet JTM-4VS-1 Mill With ACU-RITE 203 DRO With X and Y-Axis Powerfeeds and Power Draw Bar 690422 at Elite Metal Tools
Jet JTM-4VS-1 Mill With ACU-RITE 203 DRO With X and Y-Axis Powerfeeds and Power Draw Bar 690422
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $28,379.99
$22,025
As low as $435.87/mo
View Details
Jet EVS-1440 Electronic Variable Speed lathe with Collet Closer, 3HP 311442 at Elite Metal Tools
Jet EVS-1440 Electronic Variable Speed lathe with Collet Closer, 3HP 311442
  • Compound and cross slide have backlash elimination
  • Electronic Chuck Key Docking Station
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Independent lead screw and feed rod
MSRP: $25,677.07
$20,070
As low as $397.18/mo
View Details
Jet 1/2-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS050-020 104024 at Elite Metal Tools
Jet 1/2-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS050-020 104024
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs
MSRP: $7,791.29
$4,410
As low as $143.32/mo
View Details
On Sale
Jet GH-1440-1 Lathe with Acu-Rite 203 DRO and Taper Attachment 323375 at Elite Metal Tools
Jet GH-1440-1 Lathe with Acu-Rite 203 DRO and Taper Attachment 323375
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $40,542.80
$31,595
As low as $625.26/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894320 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894320
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $48,245.99
$38,342
As low as $758.78/mo
View Details
Jet JAT-752, 1/2" x 24" Mini Belt Sander 505752 at Elite Metal Tools
Jet JAT-752, 1/2" x 24" Mini Belt Sander 505752
  • 360° head rotation for use in confined spaces and difficult angles
  • Aluminum construction
  • Built-in air regulator for precise speed control
  • Ergonomically Designed Grip
  • Lightweight aluminum construction
MSRP: $609.39
$462
View Details
Jet JTM-1050EVS2/230 Mill With 3-Axis Newall DP700 DRO (Knee) With X and Y-Axis Powerfeeds and Air Powered Draw Bar 690642 at Elite Metal Tools
Jet JTM-1050EVS2/230 Mill With 3-Axis Newall DP700 DRO (Knee) With X and Y-Axis Powerfeeds and Air Powered Draw Bar 690642
  • Automatic oiler releases 3 to 6 cc/cy of lubrication at adjustable time intervals
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
MSRP: $37,164.26
$29,188
As low as $577.63/mo
View Details
Jet 1-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS100-010 104033 at Elite Metal Tools
Jet 1-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS100-010 104033
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs
MSRP: $13,499.19
$7,552
As low as $245.44/mo
View Details
Jet Bed Extension for Jet JWL-20EXT Lathe 719401 at Elite Metal Tools
Jet Bed Extension for Jet JWL-20EXT Lathe 719401
  • Fits JET JWL-1440VS, JWL-1640EVS, JWL-1840EVS and JWL-1840DVR lathes
  • Includes tool rest riser
  • Mounts on the end of the bed to allow 60” between centers or down on the leg to add 18” to the diameter of the workpiece
  • Will not work on the JWL-1442VS or JWL-1642EVS
$500
As low as $16.25/mo
View Details
Jet JMD-18PFN Mill/Drill With NEWALL DP500 DRO 350135 at Elite Metal Tools
Jet JMD-18PFN Mill/Drill With NEWALL DP500 DRO 350135
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
MSRP: $9,324.80
$7,395
As low as $240.33/mo
View Details
Jet JG-150, 1-1/2 Ton Grip Puller Without Cable 286515 at Elite Metal Tools
Jet JG-150, 1-1/2 Ton Grip Puller Without Cable 286515
  • A double sealed ratchet brake system increases safety on the jobsite
  • Available in 3/4, 1-1/2 and 3-Ton pulling capacities
  • Designed to lift, lower, stretch or pull heavy loads
  • Double Sealed Ratchet Brake System
  • Lightweight zinc coated steel is used to resist corrosion
MSRP: $861.29
$564
As low as $18.33/mo
View Details
Jet IBDG-436 Combination Industrial 4" x 36" Belt and 9" Disc Grinder 578634 at Elite Metal Tools
Jet IBDG-436 Combination Industrial 4" x 36" Belt and 9" Disc Grinder 578634
  • 9" aluminum disc reduces heat buildup and prolongs abrasive life
  • Cast iron work rests with tool-less adjustments
  • Contact wheel grinding with toolless access
  • Easy-to-use belt tracking.
  • Full guarding of all non-work contact points
MSRP: $1,243.32
$1,094
As low as $35.55/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.