JET

  • Layout
Jet Tailstock Swing Away for 14", 16" and 18" Lathes 719001 at Elite Metal Tools
Jet Tailstock Swing Away for 14", 16" and 18" Lathes 719001
  • Can be used with the optional bed extension mounted in the lower position
  • Does not fit the JWL-1442 or JWL-1642
  • Fits JET JWL-1440VS, JWL-1640EVS, JWL-1840EVS, and JWL-1840DVR lathes
  • Quickly swing the lathe tailstock out of the way
  • Securely locks to the lathe bed with a few turns of the handle
$435
View Details
Jet ETM-949, Elite 9x49 Variable Speed Mill 894010 at Elite Metal Tools
Jet ETM-949, Elite 9x49 Variable Speed Mill 894010
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $25,061.40
$20,399
As low as $403.69/mo
View Details
Jet JET — RF Remote Control for Dust Collector, 115V 708636C at Elite Metal Tools
Jet JET — RF Remote Control for Dust Collector, 115V 708636C
  • Complete unit
  • Simply plug in your dust collector to the transmitter for instant remote control, no wiring needed
  • Works with all Dust Collection units 1-3/4 HP and smaller (115V ONLY)
$135
View Details
Jet JET — Infeed/Outfeed Tables for JET JWDS1632/1836 Sanders 723521 at Elite Metal Tools
Jet JET — Infeed/Outfeed Tables for JET JWDS1632/1836 Sanders 723521
  • Extends table surface to 40"
  • Includes both tables and all needed hardware
  • Each table measures 18 x 10-1/4 in
  • Steel
  • Installation hardware included
MSRP: $184.27
$179
View Details
Jet BDB-1340A With ACU-RITE 203 DRO 321121 at Elite Metal Tools
Jet BDB-1340A With ACU-RITE 203 DRO 321121
  • 6" 3-jaw direct mount scroll chuck with top reversing jaws
  • Automatic feeding and threading are fully interlocked
  • Carriage mounted spindle control lever
  • Centers and headstock center sleeves
  • Feed selectors travel in grooved ways
MSRP: $15,357.99
$12,599
As low as $409.46/mo
View Details
Jet DC-1200VX-BK1 Dust Collector, 2HP 1PH 230V, 30-Micron Bag Filter Kit 710701K at Elite Metal Tools
Jet DC-1200VX-BK1 Dust Collector, 2HP 1PH 230V, 30-Micron Bag Filter Kit 710701K
  • Eliminates premature filter clogging for sustained performance
  • High air velocity (CFM) design stands up to any competitive specifications
  • Includes four casters for maneuverability and total portability
  • Industrial controls designed for years of trouble-free use
  • Permanently lubricated, totally enclosed, fan-cooled motors are rated for continuous-duty
MSRP: $859.99
$759
As low as $24.66/mo
View Details
Jet J-7040M-4, 10" x 16" Horizontal Mitering Bandsaw 414484 at Elite Metal Tools
Jet J-7040M-4, 10" x 16" Horizontal Mitering Bandsaw 414484
  • Adjustable blade guide with six contact point system that utilizes cam follower bearings mounted on eccentric shafts on both sides of the blades
  • Adjustable Material Stop
  • Cast iron blade wheels
  • Downfeed system is controlled by a dual system of counterbalance springs working with a hydraulic cylinder
  • Heavy-duty transmission utilizes hardened and ground gears operating in an oil bath
MSRP: $12,239.52
$9,999
As low as $324.96/mo
View Details
Jet 8 x 13 Variable Speed Mitering Bandsaw | EHB-8VSM 891020 at Elite Metal Tools
Jet 8 x 13 Variable Speed Mitering Bandsaw | EHB-8VSM 891020
  • Adjustable Material Stop
  • Automatic blade shut off switch stops the sawing process
  • Built-in, self-propelled chip brush prevents chip build up in blade guides
  • Integrated pressurized wash hose for easy machine cleaning
  • Large handwheel with blade tensioning gauge accurately measures blade pressure
MSRP: $9,750
$7,939
As low as $258.01/mo
View Details
Jet 1/2-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS050-020 104024 at Elite Metal Tools
Jet 1/2-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS050-020 104024
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs
MSRP: $6,552
$4,110.20
As low as $133.58/mo
View Details
Jet JMD-45VSPF Variable Speed Square Column Geared Head Mill/Drill with Newall DP700 2-Axis DRO 351154 at Elite Metal Tools
Jet JMD-45VSPF Variable Speed Square Column Geared Head Mill/Drill with Newall DP700 2-Axis DRO 351154
  • Easy to read internal depth gauge
  • Full power to the cutting tools through Variable Speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
  • Mill Drill Stand, p/n 350045, shown in some images, is optional
  • Milling table allows for movement
MSRP: $13,748.20
$11,179
As low as $363.31/mo
View Details
Jet GH-1440-1 Lathe with Acu-Rite 203 DRO 323374 at Elite Metal Tools
Jet GH-1440-1 Lathe with Acu-Rite 203 DRO 323374
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $25,483.99
$20,879
As low as $413.19/mo
View Details
Jet 1-Ton Electric Chain Hoist 1-Phase 20' Lift | 1SS-1C-20 112000 at Elite Metal Tools
Jet 1-Ton Electric Chain Hoist 1-Phase 20' Lift | 1SS-1C-20 112000
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $5,666
$3,618
As low as $117.58/mo
View Details
Jet BDB-1340A With Collet Closer 321111 at Elite Metal Tools
Jet BDB-1340A With Collet Closer 321111
  • 6" 3-jaw direct mount scroll chuck with top reversing jaws
  • Automatic feeding and threading are fully interlocked
  • Carriage mounted spindle control lever
  • Centers and headstock center sleeves
  • Feed selectors travel in grooved ways
MSRP: $14,011.99
$11,519
As low as $374.36/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and X, Y-Axis JET Powerfeeds 894326 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and X, Y-Axis JET Powerfeeds 894326
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $37,900
$30,849
As low as $610.50/mo
View Details
Jet GHB-1340A With Newall DP700 DRO 321131 at Elite Metal Tools
Jet GHB-1340A With Newall DP700 DRO 321131
  • 6" 3 jaw direct mount chuck with top reversing jaws
  • Compound and cross slide have backlash elimination
  • Gear box gives wide inch threading and feed capabilities with no gear changes
  • Hardened and ground gears are featured in the headstock and gearbox
  • Image shown with optional bench, p/n 321443AK
MSRP: $15,803.99
$12,929
As low as $420.19/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds 894328 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds 894328
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $39,534
$32,179
As low as $636.82/mo
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds 894349 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds 894349
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $41,745.43
$33,979
As low as $672.44/mo
View Details
Jet JVM-836-1 Mill With ACU-RITE 203 DRO With X-Axis Powerfeed 690144 at Elite Metal Tools
Jet JVM-836-1 Mill With ACU-RITE 203 DRO With X-Axis Powerfeed 690144
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $16,678.57
$13,799
As low as $448.46/mo
View Details
Jet JTM-1050VS2 Variable Speed Mill with LED Worklamp and Spindle Guard, 230/460V, 3Ph 691050 at Elite Metal Tools
Jet JTM-1050VS2 Variable Speed Mill with LED Worklamp and Spindle Guard, 230/460V, 3Ph 691050
  • Chrome lead screws on X and Y axis
  • Hardened and ground table
  • Hardened and ground table capable of supporting 840 pounds
  • Internal coolant tank built into base for use with optional coolant system (coolant pump not included)
  • JET's proprietary certified Meehanite® column castings
MSRP: $19,578.72
$15,559
As low as $307.91/mo
View Details
Jet BDB-1340A, With Taper Attachment and Collet Closer 321112 at Elite Metal Tools
Jet BDB-1340A, With Taper Attachment and Collet Closer 321112
  • 6" 3-jaw direct mount scroll chuck with top reversing jaws
  • Automatic feeding and threading are fully interlocked
  • Carriage mounted spindle control lever
  • Centers and headstock center sleeves
  • Feed selectors travel in grooved ways
MSRP: $15,842.86
$12,849
As low as $417.59/mo
View Details
Jet JET — 52 Piece CK12 Clamping Kit for 5/8 in T-Slots 660012 at Elite Metal Tools
Jet JET — 52 Piece CK12 Clamping Kit for 5/8 in T-Slots 660012
  • 58-pc Clamping Kit with Tray for 5/8" T-slot
  • Storage tray can be wall-mounted or machine-mounted
  • Three complete sets to choose from
  • Twenty four studs, four each
  • Includes 6 T-slot nuts, 6 flange nuts, 4 coupling nuts, 6 step blocks, 6 step clamps, 24 studs (4 ea: 3, 4, 5, 6, 7 and 8 in lengths)
$168
View Details
Jet JET — Collet Closer 5C for GHB Series Lathes 321514A at Elite Metal Tools
Jet JET — Collet Closer 5C for GHB Series Lathes 321514A
  • Precision ground components
  • Rear mounted lever action
  • Specially designed for each model
  • Uses 5C collets
MSRP: $4,150
$3,449
As low as $112.09/mo
View Details
Jet JET — Coolant System with Motor and Tray for JTM949EVS and JTM1050EVS Mills 660125 at Elite Metal Tools
Jet JET — Coolant System with Motor and Tray for JTM949EVS and JTM1050EVS Mills 660125
MSRP: $701.12
$625
As low as $20.31/mo
View Details
Jet EVS-1440 Electronic Variable Speed lathe with Collet Closer, 3HP 311442 at Elite Metal Tools
Jet EVS-1440 Electronic Variable Speed lathe with Collet Closer, 3HP 311442
  • Compound and cross slide have backlash elimination
  • Electronic Chuck Key Docking Station
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Independent lead screw and feed rod
MSRP: $21,577.14
$17,499
As low as $346.30/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.