JET

  • Layout
Jet 1-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS100-020 104035 at Elite Metal Tools
Jet 1-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS100-020 104035
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs
MSRP: $11,194
$7,021.16
As low as $228.18/mo
View Details
Jet J-4002 1 x 42 Bench Belt and Disc Sander 577003 at Elite Metal Tools
Jet J-4002 1 x 42 Bench Belt and Disc Sander 577003
  • Abrasive belt unit removes material and finishes at the same time, allowing the operator to get into small openings, plus handle odd shapes and angles
  • Adjustable dust deflector and dust chute
  • Cast iron construction
  • Deluxe miter gauge that turns and locks for common angles, 45° both left and right
  • Heavy-duty steel base and rubber feet
MSRP: $735.71
$650
As low as $21.12/mo
View Details
Jet JET — V-Roller Stationary Material Support Stand 414122 at Elite Metal Tools
Jet JET — V-Roller Stationary Material Support Stand 414122
  • Heavy-duty cast iron and steel construction with chrome-plated ball bearing roller heads
  • Height adjusts from 23" to 38.5".
  • Locking screws for added safety
  • Roller heads are interchangeable
  • Gray
MSRP: $228.57
$212
View Details
Jet GH-1880ZX, 3-1/8" Spindle Bore Geared Head Lathe 321970 at Elite Metal Tools
Jet GH-1880ZX, 3-1/8" Spindle Bore Geared Head Lathe 321970
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $39,228.57
$31,999
As low as $633.26/mo
View Details
Jet GH-1440-3 Lathe with Collet Closer 323400 at Elite Metal Tools
Jet GH-1440-3 Lathe with Collet Closer 323400
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $23,304.29
$18,799
As low as $372.03/mo
View Details
Jet MBS-1014W-3, 10" x 14" Horizontal Mitering Bandsaw 414477 at Elite Metal Tools
Jet MBS-1014W-3, 10" x 14" Horizontal Mitering Bandsaw 414477
  • Adjustable Material Stop
  • Built-in, self-propelled blade brush extends blade life
  • Carbide blade guides with roller bearings
  • Coolant is distributed through the blade guides
  • Fully adjustable hydraulic downfeed with separate on/off control valve
MSRP: $10,195.71
$8,299
As low as $269.71/mo
View Details
Jet JMD-40GH Geared Head Mill/Drill with Newall DP500 2-Axis DRO & X-Powerfeed 351145 at Elite Metal Tools
Jet JMD-40GH Geared Head Mill/Drill with Newall DP500 2-Axis DRO & X-Powerfeed 351145
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $11,202.68
$8,999
As low as $292.46/mo
View Details
Jet 2SS-1C-15, 2-Ton Electric Chain Hoist 1-Phase 15' Lift 211500 at Elite Metal Tools
Jet 2SS-1C-15, 2-Ton Electric Chain Hoist 1-Phase 15' Lift 211500
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $6,408
$4,086
As low as $132.79/mo
View Details
Jet JET — RF Remote control for Dust Collector, 230V 708636D at Elite Metal Tools
Jet JET — RF Remote control for Dust Collector, 230V 708636D
  • Complete unit
  • Simply plug in your dust collector to the transmitter for instant remote control, no wiring needed
  • Works with all Duct Collectors up to 3 HP (230V ONLY)
$165
View Details
Jet JMD-40GHPF Geared Head Mill/Drill with Power Downfeed & Newall DP500 2-Axis DRO 351146 at Elite Metal Tools
Jet JMD-40GHPF Geared Head Mill/Drill with Power Downfeed & Newall DP500 2-Axis DRO 351146
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $9,991.25
$8,139
As low as $264.51/mo
View Details
Jet ETM-949EVS, Elite 9x49 Electronic Variable Speed Mill 230V, 3Ph 894050 at Elite Metal Tools
Jet ETM-949EVS, Elite 9x49 Electronic Variable Speed Mill 230V, 3Ph 894050
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $29,115.91
$23,699
As low as $469.00/mo
View Details
Jet JMD-45VSPFT Variable Speed Geared Head Square Column Mill/Drill with Power Downfeed 351051 at Elite Metal Tools
Jet JMD-45VSPFT Variable Speed Geared Head Square Column Mill/Drill with Power Downfeed 351051
  • Easy to read internal depth gauge
  • Full power to the cutting tools through Variable Speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
  • Mill Drill Stand, p/n 350045, shown in some images, is optional
  • Milling table allows for movement
MSRP: $11,226.06
$8,999
As low as $292.46/mo
View Details
Jet JET Woodturning Carbide Chisels 6 Piece Set - (719901) 719901 at Elite Metal Tools
Jet JET Woodturning Carbide Chisels 6 Piece Set - (719901) 719901
  • JET Carbide Turning Tool Set includes 4 interchangeable cutting blades: Square (11mm), Square Arc (11mm), Round (12mm), and Diamond (28mm).
  • Light weight extendable anodized aluminum handle. Main handle is 11" with a 10.5" extension.
  • JET Carbide Turning Tool Set is packed in a custom wood case.
  • Stainless steel shaft will not rust
  • Carbide blades have a long cutting life
MSRP: $233.99
$225
View Details
Jet EVS-949 Mill with USA Air Powered Draw Bar 894375 at Elite Metal Tools
Jet EVS-949 Mill with USA Air Powered Draw Bar 894375
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $31,560.57
$25,689
As low as $508.38/mo
View Details
Jet JHJ-35, 35-Ton Hydraulic Bottle Jack 453335K at Elite Metal Tools
Jet JHJ-35, 35-Ton Hydraulic Bottle Jack 453335K
  • Complies with ANSI/ASME B30.1 and PALD-1 Standard
  • Heavy-duty bases are electrically welded providing a stable platform
  • Hydraulic system is protected from damage by internal by-pass mechanism
  • Industrial-duty construction permits use in extreme climates
  • Lifting, pushing, spreading, bending, pressing or straightening capabilities
MSRP: $513
$327.99
View Details
Jet JBG-6W Shop Grinder with Grinding Wheel and Wire Wheel 577126 at Elite Metal Tools
Jet JBG-6W Shop Grinder with Grinding Wheel and Wire Wheel 577126
  • Adjustable Tool Rest
  • Cast iron wheel guard
  • Cast iron wheel guards dust chutes
  • Crimped Wire wheel included
  • Rubber mounts prevents movement
MSRP: $352.86
$303
View Details
Jet EVS-1440 Electronic Variable Speed lathe with Newall DP700 DRO,3HP 311448 at Elite Metal Tools
Jet EVS-1440 Electronic Variable Speed lathe with Newall DP700 DRO,3HP 311448
  • Compound and cross slide have backlash elimination
  • Electronic Chuck Key Docking Station
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Independent lead screw and feed rod
MSRP: $21,068.57
$17,259
As low as $341.55/mo
View Details
Jet GH-1880ZX Lathe With Newall DP700 DRO With Collet Closer 321583 at Elite Metal Tools
Jet GH-1880ZX Lathe With Newall DP700 DRO With Collet Closer 321583
  • Articulating LED work lamp
  • Centrally located controls with jog button
  • Electronic Chuck Key Holder
  • Five position automatic carriage stop increases productivity
  • Full length splash guard and coolant return
MSRP: $52,785.71
$43,299
As low as $856.88/mo
View Details
Jet 315mm Ferrous Manual Cold Saw | CS-315 414227 at Elite Metal Tools
Jet 315mm Ferrous Manual Cold Saw | CS-315 414227
  • Blade drive reduction gearbox operates in an oil bath for increased durability
  • Cast iron frame
  • Flood coolant system
  • Flood coolant system with a 1-1/3 Gallon coolant reservoir and pump with flow control system extends blade life
  • Fully adjustable material depth stop for sawing repeatability and increased production
MSRP: $3,930
$3,199
As low as $103.96/mo
View Details
Jet JET — 200 Series Quick Change Tool Post Set 650295 at Elite Metal Tools
Jet JET — 200 Series Quick Change Tool Post Set 650295
  • Hardened and ground working parts
  • Maximum rigidity for chatter-free performance
  • Holders fit ALLORRIS and YUASA tool posts
  • Completely sealed for maintenance free operation
  • Change tools in seconds
MSRP: $623.99
$570
As low as $18.52/mo
View Details
Jet J-7060, 12" x 20" Semi-Automatic Horizontal Bandsaw 414476 at Elite Metal Tools
Jet J-7060, 12" x 20" Semi-Automatic Horizontal Bandsaw 414476
  • Adjustable blade guide with six contact point system that utilizes cam follower bearings mounted on eccentric shafts on both sides of the blades
  • Adjustable Material Stop
  • Cast iron blade wheels
  • Downfeed system is controlled by a dual system of counterbalance springs working with a hydraulic cylinder
  • Heavy-duty transmission utilizes hardened and ground gears operating in an oil bath
MSRP: $17,510
$14,289
As low as $464.39/mo
View Details
Jet IBG-8SSB 8" Industrial Buffer 577408 at Elite Metal Tools
Jet IBG-8SSB 8" Industrial Buffer 577408
  • CSA/CUS Certified
  • Heavy Cast Iron Bases
  • Oversized motor shafts, heavy retainer plates and massive lock nuts.
  • Safety switch with removable key
  • The wide range of spacer options allow you to run a huge variety of finishing wheels.
$445
View Details
Jet HBS-56MVS, Variable Speed, Mitering 5" x 6" Horizontal Bandsaw, .5HP 115V 414558 at Elite Metal Tools
Jet HBS-56MVS, Variable Speed, Mitering 5" x 6" Horizontal Bandsaw, .5HP 115V 414558
  • Front legs feature leveling pads
  • Fully adjustable ball bearing blade guides
  • Hardened Ferrous 82-130 SFPM
  • Quick speed changes with the turn of a dial, no more belt changes
  • Variable Speed gives you the ability to cut various material
MSRP: $1,701.14
$1,379
As low as $44.81/mo
View Details
Jet J-FK350-4K, 350mm Ferrous Manual Cold Saw 414217K at Elite Metal Tools
Jet J-FK350-4K, 350mm Ferrous Manual Cold Saw 414217K
  • 30" adjustable length material stop
  • 350mm (14") Ferrous Cold Saw for steel, stainless and tough to cut alloys
  • Double self-centering vise with adjustable gibs secures the material for burr free cuts
  • Flood style coolant with flow control system extends blade life
  • Heavy-duty cast iron frame base with easy access storage provides a stable cutting platform
MSRP: $9,938.88
$8,079
As low as $262.56/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.