JET

  • Layout
Jet BDB-919 Belt Drive Bench lathe 321378 at Elite Metal Tools
Jet BDB-919 Belt Drive Bench lathe 321378
  • Backlash adjustments provided throughout the carriage
  • Emergency stop within easy reach of the Operator
  • Full Length Splash Guard
  • Power longitudinal feed allows threading and reverse threading
  • Quick change gearbox provides wide range of inch and metric threads
MSRP: $4,668.59
$3,745
As low as $121.71/mo
View Details
Jet BDB-929 Belt Drive Bench lathe 321379 at Elite Metal Tools
Jet BDB-929 Belt Drive Bench lathe 321379
  • Backlash adjustments provided throughout the carriage
  • Emergency stop within easy reach of the Operator
  • Full Length Splash Guard
  • Power longitudinal feed allows threading and reverse threading
  • Quick change gearbox provides wide range of inch and metric threads
MSRP: $5,196.79
$4,125
As low as $134.06/mo
View Details
Jet GHB-1340A, Gear Head Bench Lathe 321357A at Elite Metal Tools
Jet GHB-1340A, Gear Head Bench Lathe 321357A
  • 6" 3-jaw direct mount chuck with top reversing jaw
  • Compound and cross slide have backlash elimination
  • D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings
  • Gearbox gives wide inch threading and feed capabiltites with no gear changes
  • Hardened and ground gears are featured in the headstock and gearbox
MSRP: $13,022.79
$10,599.99
As low as $344.49/mo
View Details
Jet BDB-919 Belt Drive Bench lathe with stand 321370K at Elite Metal Tools
Jet BDB-919 Belt Drive Bench lathe with stand 321370K
  • Backlash adjustments provided throughout the carriage
  • Emergency stop within easy reach of the Operator
  • Full Length Splash Guard
  • Induction hardened and ground bedway
  • Power longitudinal feed allows threading and reverse threading
MSRP: $5,282.79
$4,186
As low as $136.04/mo
View Details
Jet BDB-929 Belt Drive Bench lathe with stand 321372K at Elite Metal Tools
Jet BDB-929 Belt Drive Bench lathe with stand 321372K
  • Backlash adjustments provided throughout the carriage
  • Emergency stop within easy reach of the Operator
  • Full Length Splash Guard
  • Induction hardened and ground bedway
  • Power longitudinal feed allows threading and reverse threading
MSRP: $5,774.29
$4,549
As low as $147.84/mo
View Details
Jet E-1440VS, Elite 14x40 EVS Lathe 892030 at Elite Metal Tools
Jet E-1440VS, Elite 14x40 EVS Lathe 892030
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $26,168.59
$20,320
As low as $402.13/mo
View Details
Jet EGH-1740, Elite 17x40 Large Spindle Bore Geared Head Lathe 892100 at Elite Metal Tools
Jet EGH-1740, Elite 17x40 Large Spindle Bore Geared Head Lathe 892100
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $46,317.09
$36,745
As low as $727.18/mo
View Details
Jet EGH-1740 With ACU-RITE 203 DRO With Taper Attachment and Collet Closer 892506 at Elite Metal Tools
Jet EGH-1740 With ACU-RITE 203 DRO With Taper Attachment and Collet Closer 892506
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $63,271.39
$48,940
As low as $968.52/mo
View Details
Jet GH-1440-1 Geared Head Lathe 322830 at Elite Metal Tools
Jet GH-1440-1 Geared Head Lathe 322830
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $23,097.09
$18,099
As low as $358.17/mo
View Details
Jet GH-1440B Geared Head Bench Lathe 331440 at Elite Metal Tools
Jet GH-1440B Geared Head Bench Lathe 331440
  • Compound and cross slide have backlash adjustment
  • Emergency stop within easy reach of the Operator
  • Enclosed gearbox design provides smooth, quiet operation
  • Gearbox gives wide range of inch & metric threading & feed capabilities with few gear changes
  • Spindle Spider available for ease of turning Gun barrels
MSRP: $17,285.99
$14,069.99
As low as $457.27/mo
View Details
Jet GHB-1236 Geared Head Bench Lathe in Jet Metalworking, Turning, Lathes 321236 at Elite Metal Tools
Jet GHB-1236 Geared Head Bench Lathe in Jet Metalworking, Turning, Lathes 321236
  • Compound and cross slide have backlash adjustment
  • Emergency stop within easy reach of the Operator
  • Enclosed gearbox design provides smooth, quiet operation
  • Gearbox gives wide range of inch & metric threading & feed capabilities with few gear changes
  • Induction hardened and ground bedway
MSRP: $13,882.79
$11,299.99
As low as $367.24/mo
View Details
Jet BDB-1340A, Belt Drive Bench Lathe 321360A at Elite Metal Tools
Jet BDB-1340A, Belt Drive Bench Lathe 321360A
  • 6" 3-jaw direct mount scroll chuck with top reversing jaws
  • Automatic feeding and threading are fully interlocked
  • Carriage mounted spindle control lever
  • Centers and headstock center sleeves
  • Feed selectors travel in grooved ways
MSRP: $12,285.69
$9,575
As low as $311.18/mo
View Details
Jet JTX-2748B, 27" x 48" 8,000 LB Capacity Pallet Truck 141800 at Elite Metal Tools
Jet JTX-2748B, 27" x 48" 8,000 LB Capacity Pallet Truck 141800
  • Lower material in a controlled decent with either hand or foot control for operator convenience
  • Overload Protection prevents lifting loads past maximum capacity
  • Polyurethane 6-1/4 x 2 inch steer wheels for non marking of floors and quieter rolling
  • Pump designed so that cylinder will not extend beyond maximum height
  • Pumps designed for any industrial environment
MSRP: $1,418.99
$899
As low as $29.21/mo
View Details
Jet EGH-1740 With Collet Closer 892501 at Elite Metal Tools
Jet EGH-1740 With Collet Closer 892501
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $49,634.29
$39,130
As low as $774.38/mo
View Details
Jet 5-Ton Hand Chain Hoist with 30' Lift | S90-500-30 101953 at Elite Metal Tools
Jet 5-Ton Hand Chain Hoist with 30' Lift | S90-500-30 101953
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $1,920.99
$1,155
As low as $37.53/mo
View Details
Jet JG-300A, 3 Ton Grip Puller with Cable 286530K at Elite Metal Tools
Jet JG-300A, 3 Ton Grip Puller with Cable 286530K
  • Double sealed ratchet brake system increases safety on the jobsite
  • Available in 3/4, 1-1/2 and 3-Ton pulling capacities
  • Designed to lift, lower, stretch, or pull heavy loads
  • Double Sealed Ratchet Brake System
  • Lightweight zinc coated steel is used to resist corrosion
MSRP: $1,643.99
$1,040
As low as $33.80/mo
View Details
Jet EGH-1740 With ACU-RITE 303 DRO With Taper Attachment and Collet Closer 892510 at Elite Metal Tools
Jet EGH-1740 With ACU-RITE 303 DRO With Taper Attachment and Collet Closer 892510
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $61,428.59
$47,615
As low as $942.30/mo
View Details
Jet GH-1440-3 Geared Head Lathe 322840 at Elite Metal Tools
Jet GH-1440-3 Geared Head Lathe 322840
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $23,097.09
$18,105
As low as $358.29/mo
View Details
Jet 5-HDT, 5-Ton Manual Trolley 262050 at Elite Metal Tools
Jet 5-HDT, 5-Ton Manual Trolley 262050
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened steel wheels and double sealed lubricated ball bearings provide smooth movement
  • Welded all-steel frame and powder coat finish provide maximum durability and protection
MSRP: $1,026.99
$645
As low as $20.96/mo
View Details
Jet E-1236VS, Elite 12x36 EVS Lathe 892000 at Elite Metal Tools
Jet E-1236VS, Elite 12x36 EVS Lathe 892000
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $20,701.39
$15,899
As low as $314.64/mo
View Details
Jet MT500, 5 Ton Two Speed Electric Trolley 3-Phase 230V 140190 at Elite Metal Tools
Jet MT500, 5 Ton Two Speed Electric Trolley 3-Phase 230V 140190
  • Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
  • TAA Approved
  • Two speeds reduces bump firing to while still allowing high speed movement of materials
  • Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
  • Expanded flange capacity kits are available
MSRP: $5,195.99
$2,920
As low as $94.90/mo
View Details
Jet GHB-1340A Lathe With Newall NMS300 DRO 323131 at Elite Metal Tools
Jet GHB-1340A Lathe With Newall NMS300 DRO 323131
  • 6" 3-jaw direct mount chuck with top reversing jaw
  • Compound and cross slide have backlash elimination
  • Fast, easy speed changes
  • Hardened and ground gears are featured in the headstock and gearbox
  • Image shown with optional bench, p/n 321443AK
MSRP: $16,831.39
$12,959
As low as $421.16/mo
View Details
Jet 5SS-1C-20 5 Ton 20' Lift 230V Material Handling Overhead Lifting Hoists Electric Hoists 512000 at Elite Metal Tools
Jet 5SS-1C-20 5 Ton 20' Lift 230V Material Handling Overhead Lifting Hoists Electric Hoists 512000
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $11,718.99
$6,595
As low as $214.33/mo
View Details
Jet EGH-1740 With ACU-RITE 203 DRO 892503 at Elite Metal Tools
Jet EGH-1740 With ACU-RITE 203 DRO 892503
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $52,582.79
$41,250
As low as $816.33/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.