JET

  • Layout
Jet E-1440VS With ACU-RITE 303 CSS DRO With Collet Closer 892467 at Elite Metal Tools
Jet E-1440VS With ACU-RITE 303 CSS DRO With Collet Closer 892467
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $37,839.99
$30,145
As low as $596.56/mo
View Details
Jet 2SS-1C-10, 2-Ton Electric Chain Hoist 1-Phase 10' Lift 211000 at Elite Metal Tools
Jet 2SS-1C-10, 2-Ton Electric Chain Hoist 1-Phase 10' Lift 211000
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $8,308.29
$4,799
As low as $155.96/mo
View Details
Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS100-460-010 144004 at Elite Metal Tools
Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS100-460-010 144004
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $9,579.89
$5,422
As low as $176.21/mo
View Details
Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS050-460-020 144003 at Elite Metal Tools
Jet 1/2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS050-460-020 144003
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $8,120.19
$4,656
As low as $151.32/mo
View Details
Jet TS050-230-020,1/2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT050 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 140235K at Elite Metal Tools
Jet TS050-230-020,1/2-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT050 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 140235K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $11,850.29
$6,806
As low as $221.19/mo
View Details
Jet E-1440VS With ACU-RITE 303 CSS DRO With Taper Attachment 892466 at Elite Metal Tools
Jet E-1440VS With ACU-RITE 303 CSS DRO With Taper Attachment 892466
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $38,380.53
$30,542
As low as $604.42/mo
View Details
Jet E-1236VS With Newall DP700 DRO With Collet Closer 892321 at Elite Metal Tools
Jet E-1236VS With Newall DP700 DRO With Collet Closer 892321
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $29,055.72
$22,872
As low as $452.63/mo
View Details
Jet 5SS-1C-10, 5-Ton Electric Chain Hoist 1-Phase 10' Lift 511000 at Elite Metal Tools
Jet 5SS-1C-10, 5-Ton Electric Chain Hoist 1-Phase 10' Lift 511000
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $11,752.39
$6,799
As low as $220.96/mo
View Details
Jet JLP-150A-15, 1-1/2 Ton Lever Hoist with 15' Lift 287402 at Elite Metal Tools
Jet JLP-150A-15, 1-1/2 Ton Lever Hoist with 15' Lift 287402
  • Grade 80 black oxide coated load chain for added durability
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
  • JET’s improved easy free chain design is a two-step, no load, free chaining system. The system permits quicker hoist positioning and take up of slack chain, and is engineered not to free chain under load
MSRP: $735.89
$499
View Details
Jet TS300-230-015,3-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT300 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 140117K at Elite Metal Tools
Jet TS300-230-015,3-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT300 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 140117K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $18,490.99
$10,432
As low as $339.04/mo
View Details
Jet 1/2-Ton Aluminum Hand Chain Hoist with 10ft of lift | AL100-050-10 133051 at Elite Metal Tools
Jet 1/2-Ton Aluminum Hand Chain Hoist with 10ft of lift | AL100-050-10 133051
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $681.99
$499
View Details
On Sale
Jet 1-Ton Aluminum Hand Chain Hoist with 20ft of Lift | AL100-100-20 133120 at Elite Metal Tools
Jet 1-Ton Aluminum Hand Chain Hoist with 20ft of Lift | AL100-100-20 133120
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $854.69
Was: $639
Now: $415.35
As low as $13.49/mo
View Details
Jet E-1236VS With Taper Attachment 892300 at Elite Metal Tools
Jet E-1236VS With Taper Attachment 892300
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $26,487.99
$20,986
As low as $415.31/mo
View Details
Jet TS500-230-020,5-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT500 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 140129K at Elite Metal Tools
Jet TS500-230-020,5-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT500 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 140129K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $23,405.79
$13,153
As low as $427.47/mo
View Details
Jet 1/4-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS025-010 104011 at Elite Metal Tools
Jet 1/4-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS025-010 104011
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • Hoist carries a dust and moisture rating of IP-55 and the wireless transmitter IP-65 which means hoist can stay in the light rain and pendant is dust and water proof.
MSRP: $7,048.79
$4,094
As low as $133.05/mo
View Details
Jet 10-PT, 10-Ton Heavy Duty Manual Trolley 252060 at Elite Metal Tools
Jet 10-PT, 10-Ton Heavy Duty Manual Trolley 252060
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened large steel wheels and thicker double sealed lubricated ball bearings provide smooth movement
  • Welded heavy gauge steel frame and powder coat finish provide maximum durability and protection
MSRP: $2,946.89
$1,738
As low as $56.48/mo
View Details
Jet JLP-025A-10 1/4 Ton Mini-Puller, 10' Lift 287101 at Elite Metal Tools
Jet JLP-025A-10 1/4 Ton Mini-Puller, 10' Lift 287101
  • Cast steel safety latches are secured with Allen screws and lock nuts
  • Compact design with smaller body and lightweight design for low headroom applications and use in confined areas
  • Hooks slowly stretch to indicate an overload situation increasing jobsite safety
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging
MSRP: $344.29
$225
View Details
Jet 2-Ton Aluminum Hand Chain Hoist with 20ft of Lift | AL100-200-20 133220 at Elite Metal Tools
Jet 2-Ton Aluminum Hand Chain Hoist with 20ft of Lift | AL100-200-20 133220
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $1,252.89
$839
As low as $27.26/mo
View Details
Jet MT300-4, 3 Ton Two Speed Electric Trolley 3-Phase 460V 144189 at Elite Metal Tools
Jet MT300-4, 3 Ton Two Speed Electric Trolley 3-Phase 460V 144189
  • Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
  • TAA Approved
  • Two speeds reduces bump firing to while still allowing high speed movement of materials
  • Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
  • Expanded flange capacity kits are available
MSRP: $5,229.39
$2,998
As low as $97.43/mo
View Details
Jet E-1340VS With ACU-RITE 303 DRO With Taper Attachment and Collet Closer 892414 at Elite Metal Tools
Jet E-1340VS With ACU-RITE 303 DRO With Taper Attachment and Collet Closer 892414
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $39,867.07
$31,634
As low as $626.03/mo
View Details
Jet 3-Ton Aluminum Hand Chain Hoist with 30ft of Lift | AL100-300-30 133330 at Elite Metal Tools
Jet 3-Ton Aluminum Hand Chain Hoist with 30ft of Lift | AL100-300-30 133330
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $2,527.79
$1,575
As low as $51.18/mo
View Details
Jet ETM-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894171 at Elite Metal Tools
Jet ETM-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894171
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $45,813.45
$35,999
As low as $712.42/mo
View Details
Jet E-1340VS With ACU-RITE 303 DRO With Taper Attachment 892412 at Elite Metal Tools
Jet E-1340VS With ACU-RITE 303 DRO With Taper Attachment 892412
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $36,758.80
$29,351
As low as $580.85/mo
View Details
Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894362 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894362
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $47,299.99
$38,253
As low as $757.02/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.