Category
Country of Origin

JET

Jet JAT-481, 1/4", 1 HP Extended Die Grinder 505481 at Elite Metal Tools
Jet JAT-481, 1/4", 1 HP Extended Die Grinder 505481
  • 360° Rotating air inlet keeps the air hose tangle free for added safety
  • Comes standard with 1/4" Erickson collet
  • Extended design for additional reach
  • Impact resistant composite housings reduce tool weight and user fatigue.
  • Upgraded Full, 1 HP motors provide the heavy-duty power needed for harsh industrial environments
MSRP: $441.09
$291
View Details
Jet EVS-949 Mill with 2-Axis ACU-RITE 303 DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894334 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis ACU-RITE 303 DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894334
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $47,299.99
$37,658
As low as $745.25/mo
View Details
Jet EVS-1440 Electronic Variable Speed lathe with Acu-Rite 203 DRO and Collet Closer, 3HP 311446 at Elite Metal Tools
Jet EVS-1440 Electronic Variable Speed lathe with Acu-Rite 203 DRO and Collet Closer, 3HP 311446
  • Compound and cross slide have backlash elimination
  • Electronic Chuck Key Docking Station
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Independent lead screw and feed rod
MSRP: $30,136.80
$23,295
As low as $461.00/mo
View Details
Jet JTM-1254VS with 2-Axis ACU-RITE G-2 MILLPOWER CNC 691940 at Elite Metal Tools
Jet JTM-1254VS with 2-Axis ACU-RITE G-2 MILLPOWER CNC 691940
  • 12.1" High resolution display (1024 x 768) with 3D graphics
  • Adjustable gibs throughout
  • Automatic Lubrication every 180 minutes with a flow of 3-6cc reduces maintenance
  • Available offline software
  • Built-in calculator: Performs standard, trig, and geometry calculations and transfers them directly into part programs
MSRP: $64,868.53
$50,365
As low as $996.72/mo
View Details
Jet JVM-836-1 Mill With X-Axis Powerfeed 690156 at Elite Metal Tools
Jet JVM-836-1 Mill With X-Axis Powerfeed 690156
  • Graduated scale on column
  • Hardened and ground precision table
  • Head tilts left or right
  • High precision spindle bearings
  • Large Diameter quill is chromed
MSRP: $16,081.99
$12,465
As low as $405.11/mo
View Details
Jet JAT-483, 4", 1 HP Extended Cut-Off Tool 505483 at Elite Metal Tools
Jet JAT-483, 4", 1 HP Extended Cut-Off Tool 505483
  • 360° Rotating air inlet keeps the air hose tangle free for added safety
  • Easy-to-use spindle lock system holds the cutting wheel when choosing one of 11 adjustable positions of the swivel guard
  • Impact resistant composite housings reduce tool weight and user fatigue.
  • Precision spiral bevel gears transfer torque and speed to spindle for added durability
  • Right-angle head design for reaching tight or angled grinding jobs
MSRP: $650.09
$478
View Details
Jet IBG-10SSB 10" Industrial Buffer 578410 at Elite Metal Tools
Jet IBG-10SSB 10" Industrial Buffer 578410
  • CSA/CUS Certified
  • Heavy Cast Iron Bases
  • Oversized motor shafts, heavy retainer plates and massive lock nuts.
  • Safety switch with removable key
  • The wide range of spacer options allow you to run a huge variety of finishing wheels.
MSRP: $959.52
$863
As low as $28.04/mo
View Details
Jet PT-2036JB, 20" x 36" 5,500 LB Capacity Pallet Truck 161004 at Elite Metal Tools
Jet PT-2036JB, 20" x 36" 5,500 LB Capacity Pallet Truck 161004
  • 2/12 inch low profile allows for easy engagement of pallets
  • Lower material in a controlled decent with either hand or foot control for operator convenience
  • Overload Protection prevents lifting loads past maximum capacity
  • Polyurethane 6-1/4 x 2 inch steer wheels for non marking of floors and quieter rolling
  • Pumps designed for any industrial environment
MSRP: $1,112.09
$724
As low as $23.53/mo
View Details
Jet EGH-1740 With Newall DP700 DRO 892511 at Elite Metal Tools
Jet EGH-1740 With Newall DP700 DRO 892511
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $57,435.72
$44,990
As low as $890.35/mo
View Details
Jet EVS-949 Mill with 2-Axis ACU-RITE 203 DRO 894309 at Elite Metal Tools
Jet EVS-949 Mill with 2-Axis ACU-RITE 203 DRO 894309
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $38,515.72
$30,165
As low as $596.96/mo
View Details
Jet JMD-18 Mill/Drill With Newall DP500 DRO and X-Axis Table Powerfeed 350134 at Elite Metal Tools
Jet JMD-18 Mill/Drill With Newall DP500 DRO and X-Axis Table Powerfeed 350134
  • 1/2” Drill chuck, chuck arbor
  • 360° head swivel
  • Adjustable carbide facemill
  • Base taper allows for easier clean up
  • Easy to read internal depth gauge
MSRP: $9,459.99
$7,421
As low as $241.18/mo
View Details
On Sale
Jet JMD-45GHPF Geared Head Square Column Mill/Drill with Power Downfeed 351046 at Elite Metal Tools
Jet JMD-45GHPF Geared Head Square Column Mill/Drill with Power Downfeed 351046
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
  • Mill Drill Stand, p/n 350045, shown in some images, is optional
  • Milling table allows for movement
MSRP: $11,081.72
Was: $8,594
Now: $7,734.60
As low as $251.37/mo
View Details
On Sale
Jet J-7040-4, 10" x 16" Horizontal Bandsaw 414499 at Elite Metal Tools
Jet J-7040-4, 10" x 16" Horizontal Bandsaw 414499
  • Adjustable blade guide with six contact point system that utilizes cam follower bearings mounted on eccentric shafts on both sides of the blades
  • Adjustable Material Stop
  • Heavy-duty transmission utilizes hardened and ground gears operating in an oil bath
  • Patented 3-Jaw vise with rapid action moveable jaw for faster set up
  • Swing away control panel houses major saw controls
MSRP: $10,135.72
$7,949
As low as $258.34/mo
View Details
Jet JMD-40GH Geared Head Mill/Drill with Newall DP500 2-Axis DRO 351144 at Elite Metal Tools
Jet JMD-40GH Geared Head Mill/Drill with Newall DP500 2-Axis DRO 351144
  • Calibrated fine down feed built in
  • CSA/CUS Certified
  • Easy to read internal depth gauge
  • Full power to the cutting tools through 6 speed geared head
  • Heavy-duty design allows for a variety of precision drilling applications
MSRP: $10,460
$8,144
As low as $264.68/mo
View Details
Jet JTM-1050 Mill With 3-Axis ACU-RITE G-2 MILLPWR CNC 690940 at Elite Metal Tools
Jet JTM-1050 Mill With 3-Axis ACU-RITE G-2 MILLPWR CNC 690940
  • 12.1" High resolution display (1024 x 768) with 3D graphics
  • Available offline software
  • Built-in calculator: Performs standard, trig, and geometry calculations and transfers them directly into part programs
  • Closed loop feedback using Acu-Rite precision linear encoders with 0.00005" resolution
  • Estimated run time feature
MSRP: $67,258.36
$51,999
As low as $1,029.06/mo
View Details
Jet JET — X-Axis Table Powerfeed for Milling Machines 350194 at Elite Metal Tools
Jet JET — X-Axis Table Powerfeed for Milling Machines 350194
  • 13L x 13W x 14 inH
  • Adjustable stops allow automatic shut off
  • Built-in clutch helps prevent damage in overload
  • Includes rapid traverse button
  • Factory installation is available
MSRP: $1,351.45
$1,144
As low as $37.18/mo
View Details
Jet 1-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS100-020 104035 at Elite Metal Tools
Jet 1-Ton Electric Chain Hoist 1-Phase 20' Lift | BLVS100-020 104035
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs
MSRP: $13,302.29
$7,450
As low as $242.12/mo
View Details
Jet EVS-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894371 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds and USA Made Air Draw Bar 894371
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $49,732.53
$39,418
As low as $780.08/mo
View Details
Jet JAT-104, 1/2" Impact Wrench 505104 at Elite Metal Tools
Jet JAT-104, 1/2" Impact Wrench 505104
  • Aluminum construction
  • Easily adjustable, 3-position forward power setting
  • Ergonomically Designed Grip
  • Lightweight aluminum construction
  • Lightweight aluminum construction reduces weight
MSRP: $382.79
$264
View Details
Jet J-4300A, 6" x 48" Industrial Belt Finishing Machine 1Ph 414600 at Elite Metal Tools
Jet J-4300A, 6" x 48" Industrial Belt Finishing Machine 1Ph 414600
  • Adjustable dust deflector and dust chute
  • Adjustable, heavy-duty, cast iron removable platen
  • Belt head adjusts vertically and horizontally
  • Completely enclosed drums and guarded sanding belt
  • Fine thread adjustments for simple and easy belt tracking
MSRP: $3,310.99
$2,694
As low as $87.55/mo
View Details
Jet JTM-4VS Mill With X and Y-Axis Powerfeeds With Power Draw Bar 690009 at Elite Metal Tools
Jet JTM-4VS Mill With X and Y-Axis Powerfeeds With Power Draw Bar 690009
  • Adjustable gibs throughout
  • Heavy duty splined motor drive
  • Internal coolant tank built into casting base for use with coolant system (Coolant pump not included)
  • Large Diameter quill is chromed
  • One shot lubrication system
MSRP: $25,677.07
$20,065
As low as $397.08/mo
View Details
Jet JAT-126, 1/2" Composite Impact Wrench 505126 at Elite Metal Tools
Jet JAT-126, 1/2" Composite Impact Wrench 505126
  • Easy touch teasing trigger for great control throughout the torque range
  • High impact resistant composite housing for lightweight durability
  • Lightweight aluminum clutch housing for great durability and tool balance
  • One hand side-to-side forward/reverse for easy one hand operation
  • Twin hammer clutch has all the power without all the vibration
MSRP: $397.09
$269
View Details
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO 894316 at Elite Metal Tools
Jet EVS-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO 894316
  • Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • The mounted control box houses major mill functions as well as an emergency stop button
MSRP: $39,461.72
$30,850
As low as $610.52/mo
View Details
Jet JTM-949EVS/230 Mill With 2-Axis ACU-RITE G-2 MILLPWR CNC 690575 at Elite Metal Tools
Jet JTM-949EVS/230 Mill With 2-Axis ACU-RITE G-2 MILLPWR CNC 690575
  • Adjustable gibs throughout
  • Class 7 bearings support the spindle for maximum rigidity in heavy cutting applications
  • Dual locks on all moveable surfaces
  • Heavy-duty spindle brake
  • Internal coolant tank built into casting base
MSRP: $57,705.99
$45,185
As low as $894.21/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.