JET

  • Layout
Jet BDB-919 Belt Drive Bench lathe 321378 at Elite Metal Tools
Jet BDB-919 Belt Drive Bench lathe 321378
  • Backlash adjustments provided throughout the carriage
  • Emergency stop within easy reach of the Operator
  • Full Length Splash Guard
  • Power longitudinal feed allows threading and reverse threading
  • Quick change gearbox provides wide range of inch and metric threads
MSRP: $4,668.59
$3,745
As low as $121.71/mo
View Details
Jet BDB-929 Belt Drive Bench lathe 321379 at Elite Metal Tools
Jet BDB-929 Belt Drive Bench lathe 321379
  • Backlash adjustments provided throughout the carriage
  • Emergency stop within easy reach of the Operator
  • Full Length Splash Guard
  • Power longitudinal feed allows threading and reverse threading
  • Quick change gearbox provides wide range of inch and metric threads
MSRP: $5,196.79
$4,125
As low as $134.06/mo
View Details
Jet GHB-1340A, Gear Head Bench Lathe 321357A at Elite Metal Tools
Jet GHB-1340A, Gear Head Bench Lathe 321357A
  • 6" 3-jaw direct mount chuck with top reversing jaw
  • Compound and cross slide have backlash elimination
  • D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings
  • Gearbox gives wide inch threading and feed capabiltites with no gear changes
  • Hardened and ground gears are featured in the headstock and gearbox
MSRP: $13,022.79
$10,599.99
As low as $344.49/mo
View Details
Jet BDB-919 Belt Drive Bench lathe with stand 321370K at Elite Metal Tools
Jet BDB-919 Belt Drive Bench lathe with stand 321370K
  • Backlash adjustments provided throughout the carriage
  • Emergency stop within easy reach of the Operator
  • Full Length Splash Guard
  • Induction hardened and ground bedway
  • Power longitudinal feed allows threading and reverse threading
MSRP: $5,282.79
$4,186
As low as $136.04/mo
View Details
Jet JCDC-3 Cyclone Dust Collector Kit, 3HP, 230V 717530K at Elite Metal Tools
Jet JCDC-3 Cyclone Dust Collector Kit, 3HP, 230V 717530K
  • Direct mounted filter eliminates inefficiencies from ridged flex hosing and bends
  • Double paddle manual cleaning system quickly cleans the pleated filter
  • Fine dust particles are filtered through pleated material that captures even the smallest particles down to 1 micron and below
  • Heavy debris is captured in a 66 gallon drum with quick release levers and independent casters for quick emptying
  • Heavy debris is pulled down to collection drum before debris stream reaches the filter, providing constant suction
MSRP: $3,255.69
$2,649.99
As low as $86.12/mo
View Details
Jet BDB-929 Belt Drive Bench lathe with stand 321372K at Elite Metal Tools
Jet BDB-929 Belt Drive Bench lathe with stand 321372K
  • Backlash adjustments provided throughout the carriage
  • Emergency stop within easy reach of the Operator
  • Full Length Splash Guard
  • Induction hardened and ground bedway
  • Power longitudinal feed allows threading and reverse threading
MSRP: $5,774.29
$4,549
As low as $147.84/mo
View Details
Jet E-1440VS, Elite 14x40 EVS Lathe 892030 at Elite Metal Tools
Jet E-1440VS, Elite 14x40 EVS Lathe 892030
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Inverter drive system provides infinitely variable spindle speeds
MSRP: $26,168.59
$20,320
As low as $402.13/mo
View Details
Jet EGH-1740, Elite 17x40 Large Spindle Bore Geared Head Lathe 892100 at Elite Metal Tools
Jet EGH-1740, Elite 17x40 Large Spindle Bore Geared Head Lathe 892100
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $46,317.09
$36,745
As low as $727.18/mo
View Details
Jet EGH-1740 With ACU-RITE 203 DRO With Taper Attachment and Collet Closer 892506 at Elite Metal Tools
Jet EGH-1740 With ACU-RITE 203 DRO With Taper Attachment and Collet Closer 892506
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $63,271.39
$48,940
As low as $968.52/mo
View Details
Jet GH-1440-1 Geared Head Lathe 322830 at Elite Metal Tools
Jet GH-1440-1 Geared Head Lathe 322830
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $23,097.09
$18,099
As low as $358.17/mo
View Details
Jet GH-1440B Geared Head Bench Lathe 331440 at Elite Metal Tools
Jet GH-1440B Geared Head Bench Lathe 331440
  • Compound and cross slide have backlash adjustment
  • Emergency stop within easy reach of the Operator
  • Enclosed gearbox design provides smooth, quiet operation
  • Gearbox gives wide range of inch & metric threading & feed capabilities with few gear changes
  • Spindle Spider available for ease of turning Gun barrels
MSRP: $17,285.99
$14,069.99
As low as $457.27/mo
View Details
Jet GHB-1236 Geared Head Bench Lathe in Jet Metalworking, Turning, Lathes 321236 at Elite Metal Tools
Jet GHB-1236 Geared Head Bench Lathe in Jet Metalworking, Turning, Lathes 321236
  • Compound and cross slide have backlash adjustment
  • Emergency stop within easy reach of the Operator
  • Enclosed gearbox design provides smooth, quiet operation
  • Gearbox gives wide range of inch & metric threading & feed capabilities with few gear changes
  • Induction hardened and ground bedway
MSRP: $13,882.79
$11,299.99
As low as $367.24/mo
View Details
Jet BDB-1340A, Belt Drive Bench Lathe 321360A at Elite Metal Tools
Jet BDB-1340A, Belt Drive Bench Lathe 321360A
  • 6" 3-jaw direct mount scroll chuck with top reversing jaws
  • Automatic feeding and threading are fully interlocked
  • Carriage mounted spindle control lever
  • Centers and headstock center sleeves
  • Feed selectors travel in grooved ways
MSRP: $12,285.69
$9,575
As low as $311.18/mo
View Details
Jet AFS-2000, 1700CFM Air Filtration System, 3-Speed, with Remote Control 708615 at Elite Metal Tools
Jet AFS-2000, 1700CFM Air Filtration System, 3-Speed, with Remote Control 708615
  • Adjustable Exhaust directs the air where you want it for optimal circulation
  • Disposable Electrostatic Outer Filter attracts more dust particles than standard filters
  • Electrostatic Outer Filter
  • Four eye bolts let you hang unit from shop ceiling; all hardware included
  • Fully enclosed ball bearing motor with overload protection for long, dependable service
MSRP: $1,044.29
$899
As low as $29.21/mo
View Details
Jet EGH-1740 With Collet Closer 892501 at Elite Metal Tools
Jet EGH-1740 With Collet Closer 892501
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $49,634.29
$39,130
As low as $774.38/mo
View Details
Jet DC-1100VX-CK Dust Collector, 1.5HP 1PH 115/230V, 2-Micron Canister Kit 708659K at Elite Metal Tools
Jet DC-1100VX-CK Dust Collector, 1.5HP 1PH 115/230V, 2-Micron Canister Kit 708659K
  • Eliminates premature filter clogging for sustained performance
  • High air velocity (CFM) design stands up to any competitive specifications
  • Includes four casters for maneuverability and total portability
  • Industrial controls designed for years of trouble-free use
  • Permanently lubricated, totally enclosed, fan-cooled motors are rated for continuous-duty
MSRP: $1,105.69
$935
As low as $30.38/mo
View Details
Jet JCDC-2 Cyclone Dust Collector, 2HP, 230V 717520 at Elite Metal Tools
Jet JCDC-2 Cyclone Dust Collector, 2HP, 230V 717520
  • Direct mounted filter eliminates inefficiencies from ridged flex hosing and bends
  • Double paddle manual cleaning system quickly cleans the pleated filter
  • Fine dust particles are filtered through pleated material that captures even the smallest particles down to 1 micron and below
  • Heavy debris is captured in a 30 gallon drum with quick release levers and independent casters for quick emptying
  • Heavy debris is pulled down to collection drum before debris stream reaches the filter, providing constant suction
MSRP: $2,727.39
$2,219.99
As low as $72.14/mo
View Details
Jet JCDC-1.5 Cyclone Dust Collector, 1.5HP, 115V 717515 at Elite Metal Tools
Jet JCDC-1.5 Cyclone Dust Collector, 1.5HP, 115V 717515
  • Direct mounted filter eliminates inefficiencies from ridged flex hosing and bends
  • Double paddle manual cleaning system quickly cleans the pleated filter
  • Fine dust particles are filtered through pleated material that captures even the smallest particles down to 1 micron and below
  • Heavy debris is captured in 20 gallon drum with quick release levers and independent casters for quick emptying
  • Heavy debris is pulled down to collection drum before debris stream reaches the filter, providing constant suction
MSRP: $2,088.59
$1,699.99
As low as $55.24/mo
View Details
Jet EGH-1740 With ACU-RITE 303 DRO With Taper Attachment and Collet Closer 892510 at Elite Metal Tools
Jet EGH-1740 With ACU-RITE 303 DRO With Taper Attachment and Collet Closer 892510
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $61,428.59
$47,615
As low as $942.30/mo
View Details
Jet GH-1440-3 Geared Head Lathe 322840 at Elite Metal Tools
Jet GH-1440-3 Geared Head Lathe 322840
  • Compound and cross slide have backlash elimination
  • Front Removable Chip Tray
  • Full Length Splash Guard
  • Inch-metric dials are standard
  • Independent lead screw and feed rod
MSRP: $23,097.09
$18,105
As low as $358.29/mo
View Details
Jet E-1236VS, Elite 12x36 EVS Lathe 892000 at Elite Metal Tools
Jet E-1236VS, Elite 12x36 EVS Lathe 892000
  • 4-Position Carriage Stop
  • Chuck guards are standard equipment on all ELITE lathes for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Hardened and ground gears in headstock reduce vibration and deflection
  • Integrated locking tool cabinet in stand on 12" Lathe
MSRP: $20,701.39
$15,899
As low as $314.64/mo
View Details
Jet GHB-1340A Lathe With Newall NMS300 DRO 323131 at Elite Metal Tools
Jet GHB-1340A Lathe With Newall NMS300 DRO 323131
  • 6" 3-jaw direct mount chuck with top reversing jaw
  • Compound and cross slide have backlash elimination
  • Fast, easy speed changes
  • Hardened and ground gears are featured in the headstock and gearbox
  • Image shown with optional bench, p/n 321443AK
MSRP: $16,831.39
$12,959
As low as $421.16/mo
View Details
Jet Air Filtration 1000CFM | AFS-1000C 713000 at Elite Metal Tools
Jet Air Filtration 1000CFM | AFS-1000C 713000
  • Automatic air quality sensor adjusts the six speeds based on air quality.
  • Captures particles down to 1 micron.
  • Timer can be set up to 16 hours.
  • Bright, clear, LED display panel is angled for easier viewing when ceiling mounted.
  • Two-Filter system with air Diffuser disperses air into a broader pattern.
MSRP: $737.09
$669
As low as $21.74/mo
View Details
Jet EGH-1740 With ACU-RITE 203 DRO 892503 at Elite Metal Tools
Jet EGH-1740 With ACU-RITE 203 DRO 892503
  • 4-Position Carriage Stop
  • Anti-Float design eliminates backlash in the cross slide
  • Enclosed coolant system contains excess coolant for increased safety
  • Front facing chip pan allows easy chip removal from the front of the machine
  • Full Length Splash Guard
MSRP: $52,582.79
$41,250
As low as $816.33/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.