JET

Jet 1/8-Ton Electric Chain Hoist 1-Phase 15' Lift | JSH-275-15 110115

Aluminum Housing- Aluminum alloy housing decreases the weight for convenient transportation
Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
Heat Treated Gears- Heat treated alloy steel geared drive train for long lasting durability
JET VOLT and SSC Series Electric Hoists and JET ET Series Electric Trolleys are not rated or designed for outdoor use or wet environments
Limit Switches- Upper and lower limiting switches increase safety by preventing the load chain from over traveling

MSRP: ~~$3,061~~

$1,956.99

As low as $63.60/mo

View Details

Jet ETM-949 Mill with 2-Axis ACU-RITE 303 DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894132

Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
The mounted control box houses major mill functions as well as an emergency stop button

MSRP: ~~$34,558.29~~

$28,129

As low as $556.67/mo

View Details

Jet 20-Ton Hand Chain Hoist with 10' Lift & Overload Protection | L-100-2000WO-10 102020

Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
Heat Treated Load Plates
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist

MSRP: ~~$8,014~~

$5,109.18

As low as $166.04/mo

View Details

Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds 894149

Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
The mounted control box houses major mill functions as well as an emergency stop button

MSRP: ~~$36,659.14~~

$29,839

As low as $590.51/mo

View Details

Jet ETM-949 Mill with 2-Axis ACU-RITE 303 DRO and X-Axis JET Powerfeed 894131

Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
The mounted control box houses major mill functions as well as an emergency stop button

MSRP: ~~$30,909.43~~

$25,159

As low as $497.89/mo

View Details

Jet JLH-600WO-10 6 Ton Lever Hoist, 10' Lift with Overload Protection 376601

All steel construction
Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
Enhanced ergonomic grip allows for greater operator control and increased comfort
Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
Heat Treated Load Plates

MSRP: ~~$2,100~~

$1,377.99

As low as $44.78/mo

View Details

Jet ETM-949 Mill with 3-Axis Newall DP700 (Quill) DRO and X-Axis JET Powerfeed and USA Made Air Draw Bar 894160

Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
The mounted control box houses major mill functions as well as an emergency stop button

MSRP: ~~$36,118.77~~

$29,399

As low as $581.80/mo

View Details

Jet ETM-949 Mill with 2-Axis ACU-RITE 203 DRO and X, Y, Z-Axis JET Powerfeeds 894114

Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
The mounted control box houses major mill functions as well as an emergency stop button

MSRP: ~~$34,030~~

$27,699

As low as $548.16/mo

View Details

Jet ETM-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X, Y, Z-Axis JET Powerfeeds 894170

Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
The mounted control box houses major mill functions as well as an emergency stop button

MSRP: ~~$36,155.63~~

$29,429

As low as $582.39/mo

View Details

Jet ETM-949 Mill with 2-Axis Newall DP700 DRO and X, Y-Axis JET Powerfeeds and USA Made Air Draw Bar 894155

Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
The mounted control box houses major mill functions as well as an emergency stop button

MSRP: ~~$35,258.57~~

$28,699

As low as $567.95/mo

View Details

Jet GH-2280ZX With ACU-RITE 303 DRO 321610

Articulating LED work lamp
Centrally located controls with jog button
Electronic Chuck Key Holder
Five position automatic carriage stop increases productivity
Full length splash guard and coolant return

MSRP: ~~$48,894.29~~

$39,899

As low as $789.60/mo

View Details

Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and X-Axis JET Powerfeed and USA MadeAir Draw Bar 894146

Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
The mounted control box houses major mill functions as well as an emergency stop button

MSRP: ~~$36,302.86~~

$29,549

As low as $584.77/mo

View Details

Jet ETM-949 Mill with 3-Axis ACU-RITE 303 (Knee) DRO and Servo X, Y-Axis Powerfeeds 894213

Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
The mounted control box houses major mill functions as well as an emergency stop button

MSRP: ~~$36,487.14~~

$29,699

As low as $587.74/mo

View Details

Jet ETM-949 Mill with 2-Axis Newall DP700 DRO and Servo X, Y-Axis Powerfeeds 894219

Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
The mounted control box houses major mill functions as well as an emergency stop button

MSRP: ~~$34,152.86~~

$27,799

As low as $550.14/mo

View Details

Jet ETM-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X-Axis JET Powerfeed 894166

Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
The mounted control box houses major mill functions as well as an emergency stop button

MSRP: ~~$33,022.77~~

$26,879

As low as $531.93/mo

View Details

Jet JLH-250WO-15 2-1/2 Ton Lever Hoist, 15' Lift with Overload Protection 376402

All steel construction
Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
Enhanced ergonomic grip allows for greater operator control and increased comfort
Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
Heat Treated Load Plates

MSRP: ~~$1,262~~

$826.99

As low as $26.87/mo

View Details

Jet 1-1/2-Ton Hand Chain Hoist with 10' Lift & Overload Protection | L-100-150WO-10 101100

Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
Heat Treated Load Plates
Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist

MSRP: ~~$703~~

$472

View Details

Jet ETM-949 Mill with 3-Axis ACU-RITE 203 (Quill) DRO and X, Y-Axis JET Powerfeeds 894119

Ball bearing support of the motor shaft ensures proper loading, support, and alignment for quiet, accurate operation at any speed
Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
The mounted control box houses major mill functions as well as an emergency stop button

MSRP: ~~$33,882.57~~

$27,579

As low as $545.78/mo

View Details

Jet SkyHyker SKY25 25ft Material Jobsite Lift with 2,000 lb Lift Capacity JT1-595

Min mast height in load position: 137”
Mast T-bar width: 35”
Base Dims: 60” x 60”
Caster size: 6”

MSRP: ~~$9,999.99~~

$7,999.99

As low as $259.99/mo

View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.