JET

  • Layout
Jet 1/2-Ton Electric Chain Hoist 1-Phase 10' Lift | 1/2SS-1C-10 121100 at Elite Metal Tools
Jet 1/2-Ton Electric Chain Hoist 1-Phase 10' Lift | 1/2SS-1C-10 121100
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $5,088.99
$2,875
As low as $93.43/mo
View Details
Jet 1/2-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS050-010 104022 at Elite Metal Tools
Jet 1/2-Ton Electric Chain Hoist 1-Phase 10' Lift | BLVS050-010 104022
  • Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4ft/min with speed dial and max of 41ft/min in high speed
  • TAA Approved
  • Single phase 120V plug enables use in all areas and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10amp.
  • Overload protection using slip clutch system to protect hoist from loads over rated capacities
  • DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs
MSRP: $7,336.99
$4,159
As low as $135.16/mo
View Details
Jet TS500-460-015,5-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT500-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 144014K at Elite Metal Tools
Jet TS500-460-015,5-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift, MT500-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 11ft 144014K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $19,772.99
$10,875
As low as $353.43/mo
View Details
Jet JLH-100WO-10 1 Ton Lever Hoist, 10' Lift with Overload Protection 376201 at Elite Metal Tools
Jet JLH-100WO-10 1 Ton Lever Hoist, 10' Lift with Overload Protection 376201
  • All steel construction
  • Caged needle bearings support the load sheave to increase efficiency and promote smooth operation
  • Enhanced ergonomic grip allows for greater operator control and increased comfort
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
MSRP: $707.99
$495
View Details
Jet 3-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS300-230-015 140117 at Elite Metal Tools
Jet 3-Ton Two Speed Electric Chain Hoist 3-Phase 15' Lift | TS300-230-015 140117
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $13,738.99
$7,635
As low as $248.13/mo
View Details
Jet 3-PT, 3-Ton Heavy Duty Manual Trolley 252030 at Elite Metal Tools
Jet 3-PT, 3-Ton Heavy Duty Manual Trolley 252030
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened large steel wheels and thicker double sealed lubricated ball bearings provide smooth movement
  • Welded heavy gauge steel frame and powder coat finish provide maximum durability and protection
MSRP: $977.99
$635
As low as $20.63/mo
View Details
Jet 1-1/2-Ton Hand Chain Hoist with 15ft of Lift | AL100-150-15 133122 at Elite Metal Tools
Jet 1-1/2-Ton Hand Chain Hoist with 15ft of Lift | AL100-150-15 133122
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $971.99
$639
As low as $20.76/mo
View Details
Jet MT100-4, 1- Ton Two Speed Electric Trolley 3-Phase 460V 144185 at Elite Metal Tools
Jet MT100-4, 1- Ton Two Speed Electric Trolley 3-Phase 460V 144185
  • Heavy-Duty motor puts out up to 0.8HP making it the strongest in it's class
  • TAA Approved
  • Two speeds reduce bump firing to while still allowing for high-speed movement of materials
  • Indoor and Outdoor use with IP-55 rating for trolley and IP-65 rating for the pendant
  • Expanded flange capacity kits are available
MSRP: $3,783.99
$2,170
As low as $70.52/mo
View Details
Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS100-460-010 144004 at Elite Metal Tools
Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 10' Lift | TS100-460-010 144004
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $8,708.99
$4,865
As low as $158.11/mo
View Details
Jet JLP-050A-15, 1/2 Ton Mini-Puller, 15' Lift 287202 at Elite Metal Tools
Jet JLP-050A-15, 1/2 Ton Mini-Puller, 15' Lift 287202
  • Cast steel safety latches are secured with Allen screws and lock nuts
  • Compact design with smaller body and lightweight design for low headroom applications and use in confined areas
  • Hooks slowly stretch to indicate an overload situation increasing jobsite safety
  • Impact resistant all steel construction for added durability and protection
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging
MSRP: $434.99
$275
View Details
Jet 1-1/2-PT, 1-1/2-Ton Heavy Duty Manual Trolley 252015 at Elite Metal Tools
Jet 1-1/2-PT, 1-1/2-Ton Heavy Duty Manual Trolley 252015
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened large steel wheels and thicker double sealed lubricated ball bearings provide smooth movement
  • Welded heavy gauge steel frame and powder coat finish provide maximum durability and protection
MSRP: $461.99
$299
View Details
Jet 10-PT, 10-Ton Heavy Duty Manual Trolley 252060 at Elite Metal Tools
Jet 10-PT, 10-Ton Heavy Duty Manual Trolley 252060
  • Built-in bumper guards on the side plates increase safety and extend trolley life
  • Complies with OSHA Regulations, ANSI / ASME B30.11 and B30.17 standards
  • Easily adjustable to wide-flange H-beams, standard I-beams, or curved track with the included spacer washers
  • Hardened large steel wheels and thicker double sealed lubricated ball bearings provide smooth movement
  • Welded heavy gauge steel frame and powder coat finish provide maximum durability and protection
MSRP: $2,678.99
$1,565
As low as $50.86/mo
View Details
Jet 1/2-Ton Aluminum Hand Chain Hoist with 10ft of lift | AL100-050-10 133051 at Elite Metal Tools
Jet 1/2-Ton Aluminum Hand Chain Hoist with 10ft of lift | AL100-050-10 133051
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $619.99
$455
View Details
Jet 1-1/2-Ton Aluminum Hand Chain Hoist with 10ft of Lift | AL100-150-10 133121 at Elite Metal Tools
Jet 1-1/2-Ton Aluminum Hand Chain Hoist with 10ft of Lift | AL100-150-10 133121
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $842.99
$569
As low as $18.49/mo
View Details
Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS100-230-020 140238 at Elite Metal Tools
Jet 1-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift | TS100-230-020 140238
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $9,799.99
$5,425
As low as $176.31/mo
View Details
Jet 2-Ton Hand Chain Hoist with 20' Lift | S90-200-20 101932 at Elite Metal Tools
Jet 2-Ton Hand Chain Hoist with 20' Lift | S90-200-20 101932
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $753.99
$510
As low as $16.57/mo
View Details
Jet 2-Ton Hand Chain Hoist with 10' Lift & Overload Protection | L-100-200WO-10 105100 at Elite Metal Tools
Jet 2-Ton Hand Chain Hoist with 10' Lift & Overload Protection | L-100-200WO-10 105100
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $910.99
$605
As low as $19.66/mo
View Details
Jet 20-Ton Hand Chain Hoist with 15' Lift & Overload Protection | L-100-2000WO-15 108015 at Elite Metal Tools
Jet 20-Ton Hand Chain Hoist with 15' Lift & Overload Protection | L-100-2000WO-15 108015
  • Double sealed ball bearings support the load sheave to increase efficiency and promote smooth operation
  • Grade 100, corrosive resistant plated load chain is a smaller, more compact link that is 20% stronger than Grade 80 load chain
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
MSRP: $9,287.99
$5,175
As low as $168.18/mo
View Details
Jet TS300-460-020,3-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT300-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 144012K at Elite Metal Tools
Jet TS300-460-020,3-Ton Two Speed Electric Chain Hoist 3-Phase 20' Lift, MT300-4 Electric 2 Speed Trolley 3PH, and 4 Button Wired Pendant 16ft 144012K
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
  • 5 Pocket Chain Sprocket provides reduced vibration, smoother operation, and reduced chain wear during long lifting or lowering of loads
MSRP: $16,128.99
$8,865
As low as $288.11/mo
View Details
Jet 5SS-1C-10, 5-Ton Electric Chain Hoist 1-Phase 10' Lift 511000 at Elite Metal Tools
Jet 5SS-1C-10, 5-Ton Electric Chain Hoist 1-Phase 10' Lift 511000
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $10,683.99
$5,875
As low as $190.93/mo
View Details
Jet 1-Ton Electric Chain Hoist 1-Phase 10' Lift | 1SS-1C-10 111000 at Elite Metal Tools
Jet 1-Ton Electric Chain Hoist 1-Phase 10' Lift | 1SS-1C-10 111000
  • 24 volt push button controller with cable strain relief system for durability and reliability
  • All steel construction
  • NEMA 4X compliant push button control pendants
  • Durable powder coat finish
  • Grade 80 Load Chain- Grade 80 black oxide coated load chain for durability
MSRP: $6,283.99
$3,575
As low as $116.18/mo
View Details
Jet 1-Ton Hand Chain Hoist with 30' Lift | S90-100-30 101913 at Elite Metal Tools
Jet 1-Ton Hand Chain Hoist with 30' Lift | S90-100-30 101913
  • Grade 80 black oxide coated load chain for added durability
  • Heat Treated Load Plates
  • Industrial rated alloy steel hooks rotate 360 degrees for easy rigging and slowly stretch to indicate an overload situation
  • Intended for the harshest environments, the heat treated load plates and case hardened corrosive resistant internal parts extend the life of the hoist
  • Needle bearings support the load sheave to increase efficiency and promote smooth operation
MSRP: $602.99
$435
View Details
Jet 5-Ton Aluminum Hand Chain Hoist with 15ft of Lift | AL100-500-15 133515 at Elite Metal Tools
Jet 5-Ton Aluminum Hand Chain Hoist with 15ft of Lift | AL100-500-15 133515
  • Extra large hand chain opening for side chain pulling
  • Sealed housing to provide extra protection against the elements
  • Complies with ANSI/ASME B30.16 and HAST-2 Standards
  • Cast steel safety latches
  • Dual pawl Weston style brake
MSRP: $2,006.99
$1,199
As low as $38.96/mo
View Details
Jet 5-Ton Two Speed Electric Chain Hoist 3-Phase 15 'Lift | TS500-230-015 140128 at Elite Metal Tools
Jet 5-Ton Two Speed Electric Chain Hoist 3-Phase 15 'Lift | TS500-230-015 140128
  • The 2 in 1 design of the Mechanical Brake and Overload Protection ensure operator safety and extended product life
  • Patented gear limit switch ensures the product switches off power instantly in the case of over lifting or lowering position
  • DC Motor Brake actuates instantly in the event of a power failure to ensure operator safety
  • Two Speed Motor ensures the correct speed for the job with a click of a button
  • IP55 TEFC Motor with Class F insulation for working in harsh environments
MSRP: $17,693.99
$9,799
As low as $318.46/mo
View Details

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.