JET

  • 1/16" Increment height scale lets you make the most precise adjustments for fine cuts
  • Four high-speed steel cutter knives produce faster, smoother cutting
  • Large handwheel with positive gear drive allows for quick and accurately table adjustments
  • Magnetic controls provide long life and reliability
  • One-piece welded steel base offers solid support and stability
MSRP: $4,545.70
$3,699.99
As low as $120.24/mo

  • 4" Dust Port hooks up to dust management system and helps keep shop clean
  • Dual infeed speed control for 16fpm or 20fpm maximizes cut efficiency
  • Dust Port hooks up to dust management system and helps keep shop clean
  • Large hand wheel with positive gear drive easily moves the head to the desired board thickness
  • Magnetic Switch with green safety light illuminates when powered
MSRP: $3,931.42
$3,199.99
As low as $103.99/mo

  • Adjustable Cast Iron Tool Rest
  • Brake Resistor added for rapid wheel stoppage
  • Cast iron guards house the 36- and 60-grit wheels
  • CSA/CUS Certified
  • Large Eye Safety Shields
MSRP: $831.43
$748
As low as $24.31/mo

  • Brake Resistor added for rapid wheel stoppage
  • CSA/CUS Certified
  • Totally enclosed, pre-lubricated ball bearings
  • Variable speed provides wide range of RPMs
  • *LED Work Lamp shown not included
MSRP: $652.86
$589
As low as $19.14/mo

  • Constructed of metal for years of use
  • Helps to extended the service life of the air conditioning equipment in the shop
  • Filters dust, smoke and oil mist in a closed or air conditioned workshop
  • Fully enclosed ball bearing motor with overload protection for long, dependable service
  • Metalworking-specific outer filter that attracts more oil mist, smoke and dust generated during the metal processing, which could effect the health of the machinist, especially in closed areas of the workshop
MSRP: $2,920
$2,429
As low as $78.94/mo

  • CSA/CUS Certified
  • Industrial strength construction for demanding usage
  • Innovative safety guarding surrounding the sanding belt
  • Large Eye Safety Shields
  • Rubber sealed bearings for years of maintenance free sanding on idle wheel
MSRP: $1,141.03
$965
As low as $31.36/mo

  • 60 grit belt and disc standard on machine
  • Adjustable dust collector and dust chute
  • Belt head adjusts vertically and horizontally
  • Belt operates at any angle
  • Completely enclosed drums and guarded sanding belt
MSRP: $2,687.14
$2,199
As low as $71.46/mo

  • Adjustable depth stop for consistent repetitive cuts
  • Adjustable folding infeed/outfeed tables for leveling to bed and saves shop space when stored
  • Dual infeed speed control for 18fpm or 26fpm maximizes cut efficiency on different wood material types
  • Dust Port hooks up to dust management system and helps keep shop clean
  • Maximum depth of cut 1/8", 6" depth and 13" width capacity
MSRP: $982.84
$849
As low as $27.59/mo

  • CSA/US: Following strict guidelines and electrical requirements, this JET Industrial Dust Collector is CSA/US certified
  • Simple and easy to clean-out chip & dust drawer
  • Easy to change exhaust filter
  • All steel construction
  • Non-sparking aluminum housing and fan blade
MSRP: $995.03
$870
As low as $28.27/mo

  • Adjustable Exhaust directs the air where you want it for optimal circulation
  • Disposable Electrostatic Outer Filter attracts more dust particles than standard filters
  • Electrostatic Outer Filter
  • Four eye bolts let you hang unit from shop ceiling; all hardware included
  • Fully enclosed ball bearing motor with overload protection for long, dependable service
MSRP: $982.84
$859
As low as $27.91/mo

  • CSA/US: Following strict guidelines and electrical requirements, this JET Industrial Dust Collector is CSA/US certified
  • Simple and easy to clean-out chip & dust drawer
  • Easy to change exhaust filter
  • All steel construction
  • Non-sparking aluminum housing and fan blade
MSRP: $3,595.71
$2,989
As low as $97.14/mo

  • Dual infeed speed control for 16fpm or 20fpm maximizes cut efficiency
  • Dust Port hooks up to dust management system and helps keep shop clean
  • Large hand wheel with positive gear drive easily moves the head to the desired board thickness
  • Magnetic Switch with green safety light illuminates when powered
  • Maximum depth of cut 1/8", 6" cutting height and 15" width capacity
MSRP: $2,948.56
$2,399.99
As low as $77.99/mo

  • Constructed of metal for years of use
  • Helps to extended the service life of the air conditioning equipment in the shop
  • Filters dust, smoke and oil mist in a closed or air conditioned workshop
  • Fully enclosed ball bearing motor with overload protection for long, dependable service
  • Adjustable Exhaust directs the air where you want it for optimal circulation
MSRP: $2,248.57
$1,849
As low as $60.09/mo

  • 9" aluminum disc reduces heat buildup and prolongs abrasive life
  • Cast iron work rests with tool-less adjustments
  • Contact wheel grinding with toolless access
  • Easy-to-use belt tracking.
  • Full guarding of all non-work contact points
MSRP: $1,276.23
$1,099
As low as $35.71/mo

  • Adjustable safety shields
  • Adjustable Tool Rest
  • CSA/CUS Certified
  • Fine and coarse vitrified grinding wheels
  • Heavy duty capacitor motor
MSRP: $2,085.71
$1,719
As low as $55.86/mo

  • 9" aluminum disc reduces heat buildup and prolongs abrasive life
  • Cast iron work rests with tool-less adjustments
  • Contact wheel grinding with toolless access
  • Easy-to-use belt tracking.
  • Full guarding of all non-work contact points
MSRP: $1,124.69
$960
As low as $31.20/mo

  • Extra large tilting table
  • Extra large tilting table lowers completely below disc for use of the entire disc surface
  • Low voltage protection switch
  • Precision table raiser utilizes a rack and gear mechanism for effortless operation
  • Rigid column and heavy duty base
MSRP: $4,439.31
$3,619
As low as $117.61/mo

  • Adjustable Dust port with high dust collection efficiency and drive sparks away from the Operator
  • Aluminum casted drive wheel for years of use
  • Flat and Angular Stock: Platen setting is the perfect angle for high speed, precision flat and level grinding
  • Fully guarded on all grinding surfaces
  • Steel frame and platen provides heavy duty construction
MSRP: $2,550.49
$2,079
As low as $67.56/mo

  • CSA/CUS Certified
  • Industrial strength construction for demanding usage
  • Innovative safety guarding surrounding the sanding belt
  • Large Eye Safety Shields
  • Rubber sealed bearings for years of maintenance free sanding on idle wheel
MSRP: $831.43
$748
As low as $24.31/mo

  • 80 Grit Belt & Disc Provided on machine
  • Cast iron tilting table
  • Dust collection shrouds on belt and disc
  • Enclosed base protects motor from dust and debris
  • Quick-release tension mechanism makes belt changes quick and easy
MSRP: $1,744.29
$1,449
As low as $47.09/mo

  • For grinding and refinishing cylindrical shapes
  • Grind difficult to reach areas with the 3" X 2" or 1-1/2" X 2" diameter contact wheels
  • MADE IN THE U.S.A.
  • Performs intricate contouring or internal finishing on uniquely shaped parts
  • Puts a satin finish on steel, iron or aluminum
MSRP: $3,131.40
$2,549
As low as $82.84/mo

  • CSA/CUS Certified
  • Industrial strength construction for demanding usage
  • Innovative safety guarding surrounding the sanding belt
  • Large Eye Safety Shields
  • Rubber sealed bearings for years of maintenance free sanding on idle wheel
MSRP: $1,321.14
$1,125
As low as $36.56/mo

  • Constructed of metal for years of use
  • Helps to extended the service life of the air conditioning equipment in the shop
  • Filters dust, smoke and oil mist in a closed or air conditioned workshop
  • Fully enclosed ball bearing motor with overload protection for long, dependable service
  • Adjustable Exhaust directs the air where you want it for optimal circulation
MSRP: $1,696.69
$1,429
As low as $46.44/mo

  • Easy to change air filter
  • Easy to empty clean-out drawer
  • Non-sparking aluminum housing and fan blade
  • Not to be used with Surface Grinders
  • Portable on 4 casters and 2 handles for ease of movement
MSRP: $2,461.43
$2,018
As low as $65.58/mo

JET was founded in 1977 and has grown into one of the world's largest companies of its kind. Their company is located in Allen, TX. They are a leader in the metalworking industry with design and construction equipment. They sell machines such as a various list and designs of drill press, power tools, and saws.

If you are interested in drill presses or anything else JET has to offer, please contact us. Here at Elite Metal Tools we strive to provide our customers with low prices and fantastic customer service.